				www.ace2003.org

Standards Development committees and meetings at ACE

SAE Aerospace Council
Chairperson: Gregory Saunders, U.S. Department of Defense
Secretary: Scott Klavon, SAE Aerospace
Meeting: September 10-11, in Room 515B at the Palais des Congres de Montreal
SAE Staff contact: Maureen Lemankiewicz, mlemank@sae.org

The SAE Aerospace Council guides the activities of the Aerospace Standards Program. The Council members are executives from commercial, regional, general aviation, military, space and government agencies. These leaders ensure that the program is well managed, efficient, avoids duplication of effort, and addresses the aerospace industry needs. The SAE Aerospace Council reports to the Technical Standards Board (TSB).

SAE A-5 Aerospace Landing Gear Systems
Chairperson: Tom Nemcheck, Aircraft Braking Systems Corp.
Vice Chairperson: Paul Ulrich, USAF
Secretary: Mark Shea, Boeing Co.
Meeting: September 8-10, 8:00AM-5:00PM at the Wyndham Hotel
SAE Staff contact: Maureen Lemankiewicz, mlemank@sae.org

The SAE A-5 Landing Gear Systems committee addresses all facets of aerospace landing gears--design, maintenance, and in-service experience. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for landing gear systems.

SAE A-6 Aerospace Actuation, Control and Fluid Power Systems
Chairperson: Peter Amos, Advanced Products Co.
Vice Chairperson: Henry Harschburger, Retired
Secretary: Wes Burandt, BVR Technologies
Meeting: September 8-11, 8:00AM-5:00PM at the Wyndham Hotel
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE A-6 Aerospace Actuation, Control and Fluid Power Systems committee addresses all facets of aerospace fluid power, actuation, and control--design, maintenance, and in-service experience. Its goal is to serve as the primary U.S. technical consultative body in fluid power, and to assist government agencies and departments, and other industry groups in providing impartial advice and counsel on technical, operational, safety, and other related matters. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for fluid power, actuation, and control systems.

SAE A-10 Aircraft Oxygen Equipment
Chairperson: Burt Parry, O2 Corp.
Vice Chairperson: James Cannon, PHD, B/E Aerospace Inc.
Secretary: Robert Garner, PHD, Federal Aviation Administration
Meeting: September 9-11, 8:30AM-5:00PM at the Holiday Inn Select
SAE Staff contact: Maureen Lemankiewicz, mlemank@sae.org

The SAE A-10 Aircraft Oxygen Equipment committee addresses all facets of aircraft oxygen equipment--design, maintenance, and in-service experience. The committee also defines the needs and encourages research in the area of aviation physiology, as it relates to respiratory functions and oxygen equipment performance. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aircraft oxygen systems.

SAE AE-5 Aerospace Fuel, Oil, & Oxidizer Systems
Chairperson: Phil Jones, Shaw Aero Devices, Inc.
Vice Chairperson: James Ohler, Ohler Engineering
Secretary: Sanford Fleishman, Boeing Co.
Meeting: September 9-12, 8:00AM-5:00PM at the Wyndham Hotel
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE AE-5 Aerospace Fuel, Oil, & Oxidizer Systems committee addresses all facets of aerospace fuel, oil, and oxidizer systems--development, maintenance, and in-service experience. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for fuel, oil, and oxidizer systems.

SAE AE-6 Starting Systems & Auxiliary Power
Chairperson: Steve Harrer, U.S. Navy
Vice Chairperson: Guenter Walper, DaimlerChrysler Aerospace Airbus GmbH
Meeting: September 11-12, 8:00AM-5:00PM in Rooms 516E (Thursday) and 515A (Friday) at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE AE-6 Starting Systems & Auxiliary Power committee addresses all facets of aerospace engine starting, auxiliary power, and related secondary systems--design, maintenance, and in-service experience. These systems include electrical, hydraulic, gaseous, and pneumatic engine starting using stored energy sources such as batteries, hydraulic accumulators, solid or liquid propellants, stored gas, or small gas turbine engines. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aircraft engine starting and auxiliary power systems.

SAE AMS Metals Group
Chairperson: Bob Steffen, Raytheon
Meeting: September 8-12, 8:00AM-5:00 PM at the Holiday Inn Select
SAE Staff contact: Kerri Rohall, ktielsch@sae.org

The SAE AMS Metals Group is comprised of six committees dedicated to creating and maintaining more than 2400 AMS specifications covering metals and metals processes. Five of those committees are categorized by commodity and are dedicated to maintaining specifications. These include:

AMS-B Finishes, Processes, & Fluids

AMS-D Nonferrous Alloys (Aluminum, Magnesium, & Copper)

AMS-E Carbon & Low Alloy Steels, Specialty Steels & Alloys

AMS-F Corrosion & Heat Resistant Alloys

AMS-G Titanium, Beryllium & Refractory Materials

The sixth committee, called the Aerospace Metals Engineering Committee (AMEC), is charged with addressing leading-edge technical issues in the aerospace metals industry. The committee provides the technical resources for cooperative activities and the synergistic interchange of ideas and member experience.

SAE AMS Nonmetals Group
Chairperson: Alan Fletcher
Meeting: AMSG8/G9 September 8-11, 8:00AM-5:00PM in Room 523B (Monday) and 524A (Tuesday-Thursday) at the Palais des Congres de Montreal
AMS CE/P September 8-10, 8:30AM-5:00PM at the Wyndham Hotel
SAE Staff contact: Kerri Rohall, ktielsch@sae.org

The SAE AMS Nonmetals Group is comprised of seven committees dedicated to creating and maintaining more than 1200 AMS specifications covering nonmetals and nonmetals processes. These include:

AMS-CE Elastomers

AMS-P Polymeric & Composites Materials

AMS-CACRC Commercial Aircraft Composite Repair

AMS-G8 Organic Coatings

AMS-G9 Aerospace Sealing

AMS-J Aircraft Maintenance Chemicals & Materials

AMS-M Aircraft Greases

SAE E-25 General Standards for Aerospace & Propulsion Systems
Chairperson: Gary Landry, Pratt & Whitney
Vice Chairperson: Roy Clarke, GE Aircraft Engines
Meeting: September 8-10, 8:00AM-5:00PM at the Wyndham Hotel
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses all facets of aerospace propulsion systems and components--design, maintenance, and in-service experience. These systems and components include aerospace propulsion engines and propellers including bolts, screws, nuts, washers, studs, rivets, pins, fluid fittings, gaskets, covers, O-rings, brackets, clamps, plugs, as well as design specifications for screw threads and fastener assembly requirements. The committee is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aerospace propulsion systems.

SAE E-32 Engine Condition Monitoring
Chairperson: Bradley Sumner, Pratt & Whitney
Vice Chairperson: Chris Pomfret, Treble One LLC
Meeting: September 9-11, 8:30AM-5:00PM in Rooms 524C and 525B at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE E-32 Engine Condition Monitoring committee addresses all facets of aircraft and helicopter engine condition monitoring and rotorcraft HUMS (Health and Usage Monitoring Systems) by gathering and analyzing requirements for the various types of aircraft gas turbines and rotorcraft. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for engine condition monitoring systems.

SAE E-33 In-Flight Propulsion Measurement
Chairperson: John Roberts, Pratt & Whitney
Vice Chairperson: Jack Rowse, Honeywell Engines Systems & Services
Vice Chairperson: Bill Thompson, Pratt & Whitney
Secretary: Sebastian Remy, Airbus SAS
Meeting: September 8-11, 8:30AM-5:00PM in Rooms 514B,C and 515A at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE E-33 In-Flight Propulsion Measurement committee addresses all facets of in-flight thrust measurement and its uncertainty through the review of current industry methods and procedures (i.e., ASME, ISO, MIDAP, USAF, JANNAF, and NIST) and determines whether the need for the additional methods exists. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for in-flight propulsion measurement.

SAE E-34 Propulsion Lubricants
Chairperson: Ron Yungk, Pratt & Whitney
Vice Chairperson: Stephen Lee, QinitiQ
Secretary: Douglas Johnson, ExxonMobil
Meeting: September 8-10, 8:00AM-5:00PM in Room 518A at the Palais des Congres de Montreal; and September 11, 8:00AM-12:00PM in Room 516A at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE E-34 Propulsion Lubricants committee addresses all facets of aerospace propulsion lubricants--development, maintenance, and in-service experience. This work includes lubricants used for gas turbine and privately owned jet engines, aircraft gearboxes and accessories as well as synthetic lubricants found on turbo propeller engines. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for propulsion lubricants.

SAE E-36 Electronic Engine Controls
Chairperson: Larry Carlisle, Pratt & Whitney
Vice Chairperson: Hals Larsen, Federal Aviation Administration
Secretary: Ian James, Goodrich Engine Control Systems
Meeting: September 9-11, 8:30AM-5:00PM in Rooms 515B (Tuesday) and 521B (Wednesday-Thursday) at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE E-36 Electronic Engine Controls committee addresses all facets of electronic aircraft engine control systems and components--design, installation, maintenance, and in-service experience. These parts and systems include metering components and actuators and cockpit display, flight control, and diagnostic and health monitoring system communications and interfaces. The committee is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for electronic engine control systems.

SAE EG-1 Aerospace Propulsion Systems Support Equipment
Chairperson: Jim Macleod, National Research Council Canada
Vice Chairperson: Dennis Debiase, D&L Service
Meeting: September 10, 8:00AM-1:00PM; September 11, 8:00AM-6:00PM; and September 12, 8:00AM-12:00PM in Rooms 522A-C, 523B at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE EG-1 Aerospace Propulsion System Support Equipment committee addresses all facets of aerospace propulsion support equipment--design, maintenance, and in-service experience. It focuses on support equipment and facilities related to gas turbine engine testing, balancing, engine accessory testing, inspection, packaging, handling, and transportability. High performance hand tools for aerospace applications are also addressed by EG-1. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aerospace propulsion-system support equipment.

SAE G-3 Aerospace Couplings, Fittings, Hose and Tubing Assemblies
Chairperson: Hans van der Velden, Boeing Co.
Vice Chairperson: Roger Christianson, Hydraflow Inc.
Secretary: Len Aube, Aerofit Products Inc.
Meeting: September 8-10, 8:00AM-6:00PM in Rooms 513E,F at the Palais des Congres de Montreal
SAE Staff contact: Donna Lutz, donnal@sae.org

The SAE G-3 Aerospace Couplings, Fittings, Hose, and Tubing Assemblies committee addresses all facets of aerospace fluid system components--design, test, procurement, maintenance, and in-service experience. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aerospace fluid system parts. A portion of the committee's work is focused on the development of procurement specifications, and the establishment of PRI Qualified Parts Lists and Nadcap Qualified Manufacturer Lists.

SAE G-14 Americas Aerospace Quality Group (AAQG)
Chairperson: David Eagan, Northrop Grumman
Vice Chairperson: Colin Clarke, Bombardier Aerospace
Meeting: September 8-10, 8:00AM-5:00PM in Rooms 522A-C (Monday) and 519B (Tuesday) and in Room 519B (Wednesday) at the Palais des Congres de Montreal
SAE Staff contact: Rebecca Lemon, lemon@sae.org

The SAE G-14 Americas Aerospace Quality Group (AAQG) committee addresses all facets of aerospace quality--design, maintenance, and in-service experience. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aerospace quality systems. Improvement in quality through variance reduction in processes and procedures is the continual focus of the committee. AAQG aims to establish and maintain a dynamic cooperation based on trust between Americas aerospace companies on initiatives to make significant improvements in quality performance and reductions in cost throughout the value stream. Initial focus regarding this objective is to continuously improve the processes used by the supply chain to deliver consistently high quality products, thereby reducing non-value added activities and costs. Other objectives for this committee are: to establish commonality of quality standards, requirements, tools and techniques; start a process of continuous improvement at suppliers; create methods to share results; and implement plans to bring the initiative to life (e.g. obtain regulatory concurrence).

SAE S-7 Flight Deck & Handling Qualities Standards for Transport Aircraft
Chairperson: Captain Steve Stowe, Delta Air Lines
Meeting: September 9-11, 8:00AM-5:00PM in Room 523A at the Palais des Congres de Montreal
SAE Staff contact: Maureen Lemankiewicz, mlemank@sae.org

The SAE S-7 Flight Deck & Handling Qualities Standards for Transport Aircraft committee addresses flight deck design and operation as well as aircraft handling qualities, with the objective of improving operational efficiencies and safety. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements pertaining to aircraft handling qualities and the flight deck.

SAE S-18 Airplane Safety Assessment
Chairperson: John Dalton, Boeing Co.
Vice Chairperson: Larry Lacy, Rockwell Collins Inc.
Meeting: September 8-12, 8:00AM-5:00PM in Room 515C and 521C (Monday and Thursday), 521B,C (Tuesday), 521A,C (Wednesday), and 515C and 513D (Friday) at the Palais des Congres de Montreal
SAE Staff contact: Rebecca Lemon, lemon@sae.org

The SAE S-18 Airplane Safety Assessment committee addresses the development of guidelines, including processes, methods and tools, to accomplish safety assessment of airplanes and related systems and equipment. The group is dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for airplane safety assessments.

Presented By: Hosted By: