Sort By:
Viewing 1 to 16 of 16
  1. Deliverable software that is not developed under the contract, but is provided by the organization, customer, or a third party (e.g., reused software, customer furnished software, COTS software, Government off-the-Shelf (GOTS) software, open source software). [9115]
  2. Deliverable software that is not developed under the contract but is provided by the contractor, the Government, or a third party. Non-developmental software may be referred to as reusable software, Government furnished software, or commercially available software, depending on its source. [DOD-STD-2167A] [9006]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 26 Apr 2017
  1. The absence of, or the failure to implement and maintain, one or more quality management system requirements, or a situation that would, on the basis of available objective evidence, raise significant doubt as to the quality of what the organization is supplying. Major: The absence of, or total breakdown of a quality management system element specified in the AQMS standard or any non-conformities where the effect is judged to be detrimental to the integrity of the product, processes or service. Minor: A single system failure or lapse in conformance with a procedure relating to the AQMS standard. NOTE: A number of minor non-conformities against one requirement can represent a total breakdown of the system and this can be considered as a major nonconformity. Any finding (e.g., comments, observations) that equates to the above definition shall be documented as a nonconformity, categorized as major or minor, and dealt with in accordance with 8.3. [9104]
  2. The non-fulfilment of a requirement that is stated, generally implied, or obligatory (see 9101 standard for definitions of major and minor nonconformities). [9104/2]
  3. A specific occurrence of a condition that does not conform to a specification or other inspection standard. [9013]
  4. Non-fulfillment of a requirement (see ISO 9000).

NOTE: It may be a nonconforming product, but may also be a late delivery, incorrect paperwork, incorrect process [production or Quality Management System (QMS) related], etc.[9136]

Chinese:
不符合(不合格)
Chinese Taiwan:
不符合性
Dutch:
afwijking
French:
non-conformité
German:
Abweichung/Fehler
Hebrew:
אי תאימות
Indonesian:
ketidaksesuaian
Italian:
non conformità
Japanese:
不適合
Korean:
부적합
Portuguese:
Não-conformidade
Russian:
Несоответствие
Spanish:
no conformidad
Turkish:
uygunsuzluk
Created: 11 Jul 2013
Updated: 21 Apr 2017

A hardware item whose conformance to quality characteristics can be determined by simple measurement and test of the end item, without uneconomical disassembly or destructive testing. (9003)

 

 

 

 

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 23 Nov 2016
Updated: 23 Nov 2016
  1. the process to control a system using digital techniques. [IAQG-history]
Chinese:
数控
Chinese Taiwan:
數位控制
Dutch:
Nummerieke controle
French:
commande numérique
German:
numerisch gesteuert
Hebrew:
בקרה ספרתית
Indonesian:
kontrol numerik
Italian:
controllo numerico
Japanese:
数値制御
Korean:
수치제어
Portuguese:
Controle numérico
Russian:
Цифровое управление
Spanish:
control numérico
Turkish:
numerik kontrol
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. Software used in the design, manufacture, inspection, test, acceptance, or calibration of a deliverable product. [9005]
  2. software used in the automated design, manufacturing or in the qualification and acceptance of deliverable products (software or hardware). [IAQG-history]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A level of inspection in the switching rules of most lot-by-lot sampling plans. Switching rules in sampling standards begin with this level of inspection as a default, and direct the inspection to greater or lesser inspection according to the
    patterns of quality in the process. [9013]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. reference which incorporates provisions from a cited publication into a normative document. (EN 13701:2001) [IAQG-history]
Chinese:
参考性文件
Chinese Taiwan:
標準參考文件
Dutch:
Normatieve referentie
French:
référence normative
German:
normative Referenz
Hebrew:
סימוכין למסמך הגדרה
Indonesian:
rujukan normatif
Italian:
riferimento normativo
Japanese:
Intensionally Blank)
Korean:
표준참조문서
Portuguese:
referência normativa
Russian:
нормативная ссылка
Spanish:
referencia normativa/ normas para consulta
Turkish:
norma ilişkin referans
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. document that provides rules, guidelines or characteristics for activities or their results.
    NOTE 1: The term 'normative document' is a generic term that covers such documents as standards, technical specifications, codes of practice and regulations. (adapted from EN 45020:1998) [IAQG-history]
Chinese:
规范性文件
Chinese Taiwan:
標準性文件
Dutch:
Normatief document
French:
document normatif
German:
Normatives Dokument
Hebrew:
מסמך הגדרה
Indonesian:
dokumen normatif
Italian:
documento normativo
Japanese:
標準化文書
Korean:
표준문서
Portuguese:
documento normativo
Russian:
нормативный документ
Spanish:
documento normativo
Turkish:
norma ilişkin doküman
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. Technique of testing material properties without impairing their future usefulness. Also known as Non-Destructive Inspection (NDI). [9013]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. The representation of data used by a specific software program. File formats and representations native to a particular software program are often considered proprietary by the software vendor and are not publicly documented. [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. generic name for the national authority that govern civil aviation in all countries. [IAQG-history]
Chinese:
国家航空管理局
Chinese Taiwan:
民航局
Dutch:
Inspectie Verkeer en Waterstaat Divisie Luchtvaart
French:
autorité nationale d'aviation
German:
Nationale Luftfahrt-Behörde
Hebrew:
רשות תעופה לאומית
Indonesian:
Otoritas Penerbangan Nasional
Italian:
autorità nazionale dell'aviazione
Japanese:
航空当局
Korean:
국가항공당국
Portuguese:
Autoridade nacional de aviação
Russian:
Национальные Авиационные власти
Spanish:
Autoridad Nacional de Aviación (ANA)
Turkish:
Ulusal Havacılık Kurumu
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. those forms of testing/inspection that do not result in permanent damage or deformation to the part being tested. Typical examples are magnetic crack detection, ultrasonic inspection, X-Ray inspection and gamma radiography. [IAQG-history]
Chinese:
无损检测
Chinese Taiwan:
非破壞性測試
Dutch:
Non destructive test
French:
essai non destructif
German:
zerstörungsfreie Prüfung
Hebrew:
בדיקת אל הרס
Indonesian:
uji tak merusak
Italian:
prove non distruttive
Japanese:
非破壊検査
Korean:
비파괴시험
Portuguese:
Ensaio não-destrutivo
Russian:
Неразрушающий контроль
Spanish:
ensayos no destructivos (END)
Turkish:
tahribatsız muayene
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A representation of data that is documented independent of a particular software program. Open standards and publicly documented formats and representations are often used as standards for data exchange, e.g., ISO 10303 (STEP). [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. product that does not meet the design, production or maintenance requirements. [IAQG-history]
Chinese:
不合格品
Chinese Taiwan:
不符合產品
Dutch:
afwijkend product
French:
produit non conforme
German:
abweichendes Produkt
Hebrew:
מוצר לא תואם
Indonesian:
produk yang tidak sesuai
Italian:
prodotto non conforme
Japanese:
不合格品
Korean:
부적합품
Portuguese:
Produto não-conforme
Russian:
Несоответствующий продукт
Spanish:
producto no conforme
Turkish:
uygun olmayan ürün
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A condition of any article, material or service in which one or more characteristics do not conform to requirements specified in the contract, drawings, specifications, or other approved product description. Includes failures, discrepancies, defects, anomalies, and malfunctions. [9009]
  2. Parts or materials that do not meet specifications or requirements. The failure of a characteristic to conform to the requirements specified in the contract, drawings, specifications, or other approved product description. [9013]
Chinese:
不符合性
Chinese Taiwan:
不符合
Dutch:
Afwijking
French:
non-conformité
German:
Fehler/Abweichung
Hebrew:
אי תאימות
Indonesian:
ketidaksesuaian
Italian:
non conformità
Japanese:
不適合
Korean:
부적합
Portuguese:
Não-conformidade
Russian:
Несоответствие
Spanish:
no conformidad
Turkish:
uygunsuzluk
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A document stating results and providing objective evidence of nonconformity against audit criteria, including the following information: containment, correction, root cause, corrective action implementation, and closure. [9101]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
Viewing 1 to 16 of 16