Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

CONEXPO-CON/AGG vehicle highlights
Ingersoll-Rand ECM-580 crawler drill designed for higher rock drilling capacity

Ingersoll-Rand Co.'s Rock Drill Division ECM-580 hydraulic crawler drill features the company's Montabert hydraulic drifter, which provides efficient delivery of impact energy to the drill bit, resulting in greater productivity and reduced drilling cost. It is designed primarily for construction and quarry-drilling contractors requiring 63.5-101.6-mm (2.5-4-in.) blast holes. The unit features a unique Intelsense II hydraulic system for full, smooth, progressive, antijam drilling. All drilling functions are monitored and adjusted hydraulically for optimal hole straightness and maximum accessory life and performance. Control adjustments are automatic, progressive, and stepless; the operate without the use of microprocessors or other complicated electronic components, while the drill's blow air sensing circuit prevents bit plugging. A key feature of the drill is a powerful 6930 L/min (245-cfm) @ 900-kPa (130-psi) air compressor for superior hole-cleaning capabilities, which minimizes regrind and maximizes drill bit life. Its in-line direct-drive powertrain requires no power divider gearbox, clutches, or hydraulic motors for powering the hydraulic pumps or the compressor. The compressor airend and pumps are coupled directly to the engine. Also, a simple, low-pressure hydraulic system eliminates troubleshooting time and increases machine uptime.
Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.