Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Product Guide - Electronics

More 1 2 3 4 5 6 7 8 9

Surface-mount chip resistor

IRC's SC3 Series of surface-mount resistors are available in standard and non-standard values capable of dissipating up to 3 W at 70°C (150°F) and are less inductive than typical wirewound devices, requiring 75% less board space. The SC3's rectangular chips are terminated on the long side, giving them a unique reverse geometry; the wider terminations allow the use of wider board traces, which reduce solder joint resistance and enable the resistor to carry higher current at a lower overall temperature. The ceramic-based resistors feature a proprietary copper ink thick-film system with a polymer overcoat.

Switch control system

The TouchTek VI six-position switch control package from Transportation Safety Technologies includes a compact customized switch control panel, PCB power-distribution center, and quick-connect cable. The system includes conductive rubber switches that change color when activated, selectable sequencing and changeable legend inserts for all six switch positions, LED diagnostics and fused circuit protection on each of the relays, and pre-configured DIP switch control for all switches to be either latching or momentary. Applications include heavy truck and bus, construction, off-highway, marine, and utility vehicles.

Dynamometer controller

The Model DSP6001 high-speed programmable dynamometer controller from Magtrol, Inc. is designed for use with any Magtrol hysteresis, eddy-current, or powder brake dynamometer; Magtrol inline torque transducer; or complimentary auxiliary instrumentation. The controller uses advanced digital-signal-processing technology for enhanced motor testing capabilities. The unit features a built-in alarm system, digital analog converter capabilities, and two channels.

Sensor elements

The BEI Duncan Electronics 98E Series sensor elements provide alternatives to fully packaged potentiometers, particularly when packaging constraints, size, and operating efficiency are critical. By incorporating a 98E potentiometric element (conductive plastic on a substrate) and contact set directly into the mating assembly, OEMs can eliminate redundant packaging typically required for rotary and linear position sensors. The sensor elements are available in a variety of substrate materials to withstand high temperatures and harsh environments.

Fluid sensor solutions catalog

The Gems Sensors' catalog includes detailed information on the company's solid-state sensors, such as its line of electro-optic liquid level sensors, which handles pressures to 17 MPa (2500 psi) and temperatures to 125°C (257°F). Other products featured in the catalog include CVD and thin-film pressure sensors, Hall-effect flow sensors, and the new compact conductance OEM level sensors. Featuring more than 350 standard products, the catalog is designed for use by large and small OEMs, plant operations, and MRO supervisors. It is user-friendly and provides product photos, part numbers, full specifications, and drawings.

More 1 2 3 4 5 6 7 8 9

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.