Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Product Guide - Hydraulics

More 1 2 3 4 5 6 7 8

Quick pressure check

Pressure Connections' GagePort Series of installation adapters enable users to quickly pressure check an entire system by allowing pressure gauges or diagnostic quick disconnect nipples to be mounted all over the system. This design allows one gauge to be easily connected to, and disconnected from, each checkpoint, providing an inexpensive way to have a pressure gauge for each checkpoint. The adapters also allow a pressure gauge face to point in any direction while tightening. The seal on the pressure gauge threads never needs to be broken, and they can be used or adjusted again and again.

Polypropylene ball valve

Bee Valve Inc.'s 100-mm (4-in) full-port ball valve is made of precision-molded, glass-reinforced polypropylene for stability, strength, and toughness. It features an eight-bolt assembly for enhanced strength, a self-aligning ball for full flow, and an easy-to-operate open/close handle. It is pressure rated at 690 kPa (100 psi) at 21°C (70°F). The ball valve is suitable for liquid fertilizer applications and commercial water hauling as well as any commercial/industrial applications where 100-mm (4-in) pipe is used.

Sealing products

The NYPLAS process, developed by Nylok Fastener Corp., applies a Plastisol material under the heads of fasteners, pop-style rivets, and double-ended flanged screws to seal out water, dust, and air. NYSEAL is a patented pre-applied, permanently fused sealing element for both threaded and unthreaded fasteners that creates a gasket-type seal and prevents leakage of fluids under pressures of 3.4 MPa (500 psi). The two sealing solutions are processed at ISO 9002-/QS-9000-certified facilities, are reusable, and will not shrink or dry out from age or exposure to elevated temperatures.

Variable displacement pumps

Bosch Automation Technology's VPV16 80-cm3 (4.9-in3), variable-displacement vane pumps operate in a direct-coupled pump-to-motor arrangement. The devices use hardened spline technology for long life and are rated for 20,680 kPa (3000 psi) continuous service. Benefits of the direct coupling include simplified design, smaller package size, reduced assembly time, reduced potential for shaft misalignment, and reduced cost and noise.

Proportional reducing valve

Thomas Magnete USA's Pilot Controlled Proportional Pressure Reducing Valve is especially suited for hydraulic applications requiring a compact design. The valve meets the market's demands for variable pressure stages, fast hydraulic functionality, reduced pressure drops, minimal electrical power, and compact design, allowing for reduced weight. The pilot stage is configured as a pressure regulator valve, which allows the pilot pressure to be adjusted with minimal electrical power.

More 1 2 3 4 5 6 7 8

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.