Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Tools of the Trade

October 2007

I/O module

SQIO SynqNet I/O interface boards from Danaher Motion allow high-volume machine builders to integrate their custom analog and/or digital I/O hardware with complex, high-performance motion into a SynqNet network architecture. SQIO maximizes machine performance by providing real-time I/O and remote motion performance diagnostics via SynqNet for in-depth system level visibility, analysis, and control. Suitable for integrating custom I/O into a SynqNet network, SQIO modules also offer a solution for high-volume OEMs who have specific I/O timing needs or need tight synchronization with motion requirements, or who want system level software visibility of I/O status and operation.
read full story*

* This is a .pdf file. You’ll need the Adobe Acrobat Reader to view it.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.