Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Tools of the Trade

December 2006

High-friction coatings

EKagrip nickel diamond coatings from ESK Ceramics, a Ceradyne company, are designed for use at joints in powertrain, transmission, suspension, and drive applications. Consisting of an electroless nickel matrix in which specified quantities of diamond particles of defined size are co-deposited, these coatings can be applied either to the joint components directly or to thin foils or shims for installation in the joint. EKagrip friction coatings can transmit up to three times as much load as conventional systems with no need to modify the joint design. Unaffected by typical in-engine environments, the coatings can be reused.
read full story*

* This is a .pdf file. You’ll need the Adobe Acrobat Reader to view it.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.