Controller Area Network (CAN) for Vehicle Applications e-Seminar

View Demo Clips

The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This e-seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry.

Instructor Mark Zachos presents details on how the CAN protocol and other standards (J2284, J2411, J1939, ISO 11898, etc.) complement each other. Validation engineers, test engineers, embedded programmers, and those who are currently or will be working with applications using CAN will benefit from the content on CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces. Also presented is a demonstration using system development tools.

Based on the popular classroom seminar, this ten and a half hour course offers an introduction, six modules, and a Gryphon demonstration accompanied by a handbook with exercises. The SAE standards, J1939 Recommended Practice for a Serial Control and Communications Vehicle Network and J1939/71 Recommended Practice for Vehicle Application Layer, are included also as reference documents.

Major topics include:

• Introduction[Total Run Time: 1 hour, 28 minutes]
  • Discuss the history of CARB and EPA regulations and how these effected the advancement of CAN in vehicles
  • Specify why more than one CAN network may be used in a vehicle
  • Explain how different networks have been classified by speed and function
• Network Overview [Total Run Time: 1 hour, 26 minutes]
  • List different BUS topologies and what topology that CAN uses
  • Define the CAN protocol network access method
  • Describe the ISO/OSI model as it relates to CAN
  • Recognize a sample of CAN device vendors
• CAN Protocol [Total Run Time: 2 hours, 8 minutes]
  • Identify the different versions of the CAN specification
  • Iterate the details of the CAN message frame and the definition of the frame bits
  • Define CAN arbitration operation and the CAN bit stuffing function
  • Calculate the CAN error detection and fault confinement states
  • Describe CAN bus utilization calculation
• CAN Controllers [Total Run Time: 1 hour, 14 minutes]
  • Provide working details of a typical CAN controller device (Intel 82527)
  • Describe how to program the 82527 registers
  • Show how to calculate CAN bit timing and program timing registers
  • Define the Philips SJA 1000 CAN device
  • Identify other CAN controller devices
• CAN Physical Layers [Total Run Time: 39 minutes]
  • Describe the operation of the ISO 11898 standard CAN physical layer
  • State how the fault tolerant CAN physical layer works
• Overview of J2284, J2411, IDB, J1939, Diagnostics on CAN [Total Run Time: 1 hour, 53 minutes]
  • Read SAE J2284 specification for passenger car CAN
  • Interpret SAE J2411 Single Wire CAN specification
  • Explain diagnostics on CAN and the ISO 15765 specification
  • Describe How the GMLAN implementation of CAN operates
• SAE J1939 [Total Run Time: 1 hour, 25 minutes]
  • Recognize the structure of the SAE J1939 document
  • Relate How the SAE J1939 implementation of CAN operates
  • Establish message IDs and data types for J1939 messages
• Gryphon Demonstration [Total Run Time: 12 minutes]
  • Explain torque split ratio and its influence on vehicle behavior
  • Describe the tire friction circle and its relationship to lateral and longitudinal acceleration
  • Discuss the history and function of ER and MR fluids
• Working Examples of J1939(Exercises)

About the Instructor: Mark Zachos
Mr. Mark Zachos is the president of Dearborn Group, Inc. and has more than twenty years of networking experience. He participates in many SAE and ISO multiplexing committees, including the following: J1850, J1939, J2284, J2411, and J2367. Mr. Zachos holds a B.S. and an M.S. in engineering from the University of Michigan, where he is currently an adjunct professor.

Is this e-Seminar for You?
This e-Seminar is geared toward validation engineers, test engineers, embedded programmers, and those who are currently working (or will be in the future) with applications using CAN. You should have at least an undergraduate engineering degree.

About e-Seminars
SAE "e-Seminars" are electronically delivered seminars featuring full-motion video illustrated with synchronized presentation slides. e-Seminars are based on some of SAE's most highly attended and rated classroom seminars.

Convenient & Portable Learning
Convenient and portable, SAE e-Seminars offer a new way to receive the same instruction as live classroom learning without the expense of travel and time away from the workplace. Using a laptop or PC with a CD-ROM drive or Internet connection, you can view individual modules at your own pace, at times convenient to you.

What Will You Receive?

CD-ROM	Online
Three (3) CDs Course Handbook (bound, paperback)	365 days of access from date of purchase Links to streaming video modules Course Handbook (downloadable, .pdf's, subject to DRM)
Both
The SAE standards, J1939 Recommended Practice for a Serial Control and Communications Vehicle Network and J1939/71 Recommended Practice for Vehicle Application Layer Online Pre-test (self-test, immediate results) Online Post-test (submit to SAE) 1.1 CEUs*/Certificate of Achievement (with satisfactory post-test score)

*SAE e-Seminars award the IACET CEU.

Equipment Requirements

CD-ROM	Online
Pentium PC 200 MHZ 32 MB RAM 32X CD-ROM Drive	Pentium III PC Minimum 128 MB RAM; recommended 256 MB RAM IE 6 & above browser recommended Macromedia Flash Player 8.0 & above Broadband-128Kbps and above
Both
Windows 2000, XP (Not currently supported by Windows Vista) 1024 X 768 Screen Resolution Sound Card/Speakers

Available in Single-User packages. Quantity discounts for three or more students and Site License options also are available - complete a Corporate Learning Solutions Request Form for a quote.

For more detail, email CustomerService@sae.org; or call
1-877-606-7323 (U.S. and Canada) or 724-776-4970 (outside US and Canada).

May We Also Recommend: Controller Area Network (CAN) for Vehicle Applications Seminar Acquiring and Analyzing Data from Sensors and In-Vehicle Networks Seminar SAE J1939 Standards Collection on the Web