Criteria

Text:
Display:

Results

Viewing 1 to 30 of 435
2014-11-25
WIP Standard
AIR5464A
Over the past decade several metal clad fibers and fabrics have been developed to provide aerospace vehicle designers with a conductive, lighter weight alternative to coated copper or steel for shielding and harness overbraids of electrical cables. Several of these candidates have been unable to provide the strength or thermal stability necessary for the aerospace environment. However, the aramid-based products have shown remarkable resistance to the rigorous environment of aerospace vehicles. Concurrent with these fiber developments, there have been changes in the structures of aerospace vehicles involving greater use of nonmetallic outer surfaces. This has resulted in a need for increased shielding of electrical cables which adds substantial weight to the vehicle. Thus, a lighter weight shielding material has become more critical to meet the performance requirements of the vehicle.
2014-10-27
Standard
AS22759C
AS22759 specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy as specified in the applicable detail specification. The fluoropolymer insulation may be polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVF2), ethylene-tetrafluoroethylene copolymer (ETFE), or other Fluoropolymer resin. The fluoropolymer may be used alone or in combination with other insulation materials. These abbreviations shall be used herein. When a wire is referenced herein, it means an insulated conductor (see 7.7).
2014-10-02
WIP Standard
AS23053/10
This detail specification establishes the requirements for a type of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/11
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/1
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/14
This detail specification establishes the requirements for a type of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/15
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/13
This detail specification establishes the requirements for a type of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/4
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/12
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/5
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/16
This detail specification establishes the requirements for a type of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/18
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/7
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/6
This detail specification establishes the requirements for a range of similar electrical insulating sleevings that will shrink to a predetermined size upon the application of heat.
2014-10-02
WIP Standard
AS23053/8
This detail specification establishes the requirements for a type of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
2014-07-23
WIP Standard
AS85485B
This specification covers the requirements for radio frequency absorptive component wires and finished cables which function electrically as distributed low-pass filters. Materials and construction details are specified in the applicable specification sheet.
2014-06-03
Standard
AS29606
This specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.
2014-05-01
Standard
AS6370A
This specification covers insulated wire for use in external aircraft antennas.
2014-03-17
WIP Standard
AS23053
This specification establishes the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat. This specification includes provisions for demonstrating compliance with qualification by certification requirements (see 4. and 7.6), in process inspection, and statistical process control inspections (See 4.4). The continuous operating temperature ratings range from -112 °F to +482 °F (-80 °C to +250 °C). The continuous operating temperature range for each sleeving class is given in the applicable detail specification.
2014-03-10
WIP Standard
AS5756/4B
No scope available.
2013-10-08
WIP Standard
AIR5444A
This SAE Aerospace Information Report (AIR) shall be limited to general information about tin whisker formation on tin plated conductors. It summarizes the mechanisms of metal whisker formation and describes possible conclusions as related to tin plated conductors. It also provides a number of reference documents that describes research and observations of the whisker phenomena, recommendations to prevent its formation and conclusions. The investigation by this task group of AE-8D was initiated by a request of the Naval Air Warfare Center, Indianapolis, Indiana, to determine if the phenomenon of tine whiskers is a problem in aerospace wire and cable. This document provides some brief information about tin whisker formation and a list of reference documents that can provide more detailed information.
2013-06-05
Standard
AMSI7444A
This specification covers flexible extruded, vinyl plastic tubing.
2013-05-09
Standard
ARP1931B
This glossary provides accepted definitions for terms commonly used by manufacturers and users of electric wire and cable, and their components, intended for use on aerospace vehicles.
Viewing 1 to 30 of 435