Criteria

Text:
Display:

Results

Viewing 1 to 30 of 1552
CURRENT
2017-09-22
Standard
AMS2685F
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) methods.
CURRENT
2017-09-22
Standard
AMSM7866B
This specification covers the requirements for procurement of one grade of powdered molybendum disulfide to be used in lubricants and greases for surfaces where boundary conditions exist.
2017-09-21
WIP Standard
AMSQQP416F
This specification covers the requirements for electrodeposited cadmium plating.
CURRENT
2017-09-20
Standard
AMS2435H
This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings. This coating has been used typically to provide a hard, wear resistant surface on metal parts which do not operate in service higher than 1000 degrees F (538 degrees C) but usage is not limited to such applications. These coatings are not recommended for surfaces with deep vee-shaped grooves, blind cavities, narrow holes or sharp corners, or where deformation of the base metal may be expected. Higher cobalt content provides increased ductility for applications where impact or fretting wear is involved.
CURRENT
2017-09-20
Standard
AMS2510F
This specification covers the engineering requirements for finishng aircraft parts and assemblies with an engine gray enamel.
CURRENT
2017-09-20
Standard
AMS2550F
This specification covers the enginering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
CURRENT
2017-09-20
Standard
AMSM45202B
This specification covers the requirements for equipment, materials and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion resistance or producing surfaces suitable for the application of a protective organic finish.
CURRENT
2017-09-20
Standard
ARP1575C
This document describes a hand-applied, nontank, phosphoric acid anodizing process for surface preparation of aluminum alloys required to achieve optimum bondline durability for structural adhesive bonding.
CURRENT
2017-09-20
Standard
ARP4252B
This Aerospace Recommended Practice is intended as a guide toward standard practices for the determination of surface cleanliness that are applicable to field operation. Some of these methods can also be used to determine quality assurance that a surface has been properly prepared and maintained. The instrumental methods are: Wettabaility, Surface Potential Difference (SPD), Ellipsometry, and Optically Stimulated Electron Emission (OSEE). Each instrument is described with respect to measurement techniques, limitations, and advantages and types of available instruments. Elementary theoretical prinicples and examples of the use of each instrument are also given.
CURRENT
2017-09-19
Standard
AMS2451/6B
This specification establishes the requirements for brush plating of copper by electrodeposition.
CURRENT
2017-09-19
Standard
AMS2690D
This specification defines the equipment, procedures, and requirements for joining leads by parallel gap resistance welding. For attaching leads by parallel gap resistance welding in the assembly of microelectronic circuitry to thin film substrates.
CURRENT
2017-09-19
Standard
AMS3079C
Protection of metal parts where a soft, readily-removable film is desired and additional protective packaging is provided.
2017-09-06
WIP Standard
AMS03_9A
This SAE Standard specifies the requirements for the electro-deposition of silver on ferrous-base, copper-base, aluminum-base, zinc-base and nickel base materials. It is primarily intended for use on electrical and electronic items which are to be plated with silver to increase the electrical conductivity of the surface. This Standard does not cover the silver plating of threaded items.
2017-09-05
WIP Standard
AMS03_11A
This SAE Standard specifies requirements for the processing of iron and steel (excluding corrosion resisting steels) to produce coatings consisting essentially of inorganic phosphates, which are intended to be used in conjunction with supplementary finishes for the protection of the basis metal against corrosion (and in certain cases to give, additionally, anti-wear properties to sliding surfaces).
2017-09-05
WIP Standard
AMS03_14A
This SAE Standard gives guidance for - and specifies the requirements for - the electrodeposition of chromium for engineering purposes. It relates to both new articles and also the reclamation of worn or over-machined components. Chromium electrodeposition undertaken for decorative purposes is not considered herein.
2017-09-05
WIP Standard
AMS03_17A
This SAE Standard specifies the requirements for the electro-deposition of gold on ferrous-base materials, copper-base materials, aluminum-base materials, zinc-base materials and nickel-base materials for MOD use. It is primarily intended for use on electrical and electronic items which are to be plated with gold to: a. Increase the electrical conductivity of the surface. b. Provide a solderable surface. This Standard does not cover the gold plating of threaded items.
2017-09-05
WIP Standard
AMS03_18A
This SAE Standard specifies the properties of chromate conversion coatings on aluminum and aluminum alloys. It details inspection and testing requirements for chromate conversion coatings. Where there are differences in the requirements for the Brushing Grade from the Standard Grade they are highlighted in this Standard.
2017-09-05
WIP Standard
AMS03_20A
This SAE Standard specifies the requirements for the electro-deposition of zinc on non-corrosion resisting steel items for protection against corrosion, and on copper-base alloy items and corrosion resisting steel items for the reduction of contact corrosion of less noble metallic materials. Zinc coatings shall not be used on items which are liable to be subjected to temperatures exceeding 350 °C.
2017-09-05
WIP Standard
AMS03_25A
This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys.
2017-09-05
WIP Standard
AMS03_27A
This SAE Standard specifies the requirements for the nickel-plating of ferrous metals, copper alloys, aluminum alloys and zinc alloys for one or more of the following purposes: a. the production of wear-resistant surfaces; b. the building up of worn or over-machined surfaces; c. corrosion resistance; d. to provide an undercoat for subsequent deposits, e.g., chromium.
2017-09-05
WIP Standard
AMS03_28PT1A
This SAE Standard covers the requirements for coatings of high purity aluminum on low alloy steels, high strength steels, corrosion-resisting steels, aluminum alloys and titanium alloys and other materials where appropriate.
2017-09-05
WIP Standard
AMS03_28PT2A
This SAE Standard covers the requirements for the deposition of cadmium coatings on carbon steel, low alloy steels, high strength steels, corrosion resisting steels and other materials where appropriate.
2017-09-05
WIP Standard
AMS03_28PT3A
This SAE Standard specifies the requirements for coatings of titanium nitride on non-corrosion resisting and corrosion resisting steels, cast irons and other suitable materials. Standard engineering items such as coated tools, drills and dies would not normally be included.
2017-09-05
WIP Standard
AMS03_19A
This SAE Standard specifies the requirements for the electro-deposition of cadmium on non-corrosion resisting steel items for protection against corrosion, and on copper based alloy items and corrosion resisting steel items for the reduction of contact corrosion of less noble metallic materials.
2017-08-22
WIP Standard
AMS2762C
This specification covers the procedure for carburizing and related heat treatments of carbon and low-alloy steel parts to produce case hardening and specified mechanical properties within the capability of each respective steel.
2017-08-18
WIP Standard
AMS2804D
This specification covers requirements for identification of castings.
CURRENT
2017-08-15
Standard
ARP1876C
This SAE Aerospace Recommended Practice defines a method for determining the weldability of weld filler metal in continuous coil or cut length form. It is applicable to all solid (non flux-containing) wires. It is intended as a referee method for testing weld filler metals in case of dispute between purchaser and vendor.
CURRENT
2017-07-26
Standard
AMS2428
This specification covers the requirements for electrodeposited nanocrystalline cobalt-phosphorus plating.
CURRENT
2017-07-18
Standard
AMS2404H
This specification covers the requirements for electroless nickel deposited on various materials.
CURRENT
2017-07-17
Standard
AMS2482E
This specification establishes the requirements for a hard aluminum oxide coating, impregnated or codeposited with polytetrafluoroethylene (PTFE) on aluminum alloys.
Viewing 1 to 30 of 1552

Filter

  • Range:
    to:
  • Year: