Criteria

Text:
Display:

Results

Viewing 1 to 30 of 242
Standard
2014-01-06
This specification covers a water-miscible, foam-on, pressure spraying cleaner in the form of a liquid.
Standard
2013-11-06
This specification covers two types of cleaner in the form of a ready-to-use liquid. Primarily for removing soils, contaminants, and residues from aircraft glass windows by manual application. The cleaners covered by this specification shall be of the following types as ordered: Type I - Regular; and Type II - Antifogging.
Standard
2013-10-20
The task of chemical process operator in the parts cleaning area is generally considered unskilled labor and in the past, little or no training had been provided or recommended. Since overhaul cleaning is a critical process step prior to visual and fluorescent penetrant inspection processes, consideration must be given to minimum levels of training for these process operators. It is the responsibility of the department supervisor to ensure that all personnel within the department are trained to acceptable level in all general aspects of health and safety and basic operating procedures. This document is intended to augment the local quality control system which will control the application and frequency of the guidelines stated within.
WIP Standard
2013-09-05
This specification covers insecticides for use in disinsection of aircraft as required on international passenger flights. Primarily as disinfectant of aircraft where required by the U.S. Department of Agriculture, the World Health Organization, or member states.
WIP Standard
2013-09-04
This specification covers a concentrated rust removing compound in the form of a liquid to be diluted with water for use either at ambient or elevated temperature.
WIP Standard
2013-09-04
This specification covers a carbon soil and paint remover compound in the form of a liquid. Primarily for removal of carbonaceous soils and paint from aircraft turbine engine parts by immersing the parts in liquid at room temperature.
WIP Standard
2013-09-04
This specification covers a strongly alkaline scale conditioner in the form of a liquid or a water-soluble powder. This product has been used typically in conditioning heat scale formed on aircraft turbine engine high-temperature alloy part by immersion in a solution of the compound at elevated temperature, but usage is not limited to such applications. These compounds are unsuitable for cleaning aluminum parts.
WIP Standard
2013-09-04
This specification covers an alkaline permanganate oxide conditioner in the form of a water-soluble powder or a liquid for dilution with water. This product has been used typically for conditioning of oxidation products on aircraft turbine engine components fabricated from steels, nickel alloys, and cobalt alloys by immersion in a solution of the cleaner at elevated temperature, but usage is not limited to such applications.
WIP Standard
2013-09-04
This specification covers an acidic oxide remover compound in the form of a ready-to-use liquid, liquid concentrate, or water-soluble powder for dilution with water or for dilution with mineral acid as defined by the compound manufacturer. Primarily for removal of oxidation products from corrosion-resistant steels, nickel alloys, and cobalt alloys by immersion in a solution of the compound at elevated temperature or room temperature as recommended by the manufacturer of the product.
WIP Standard
2013-09-04
This specification covers an inhibited phosphoric acid in the form of a liquid concentrate or a water soluble powder for dilution with water. Primarily for derusting of aircraft turbine engine ferrous components and removal of heat scale and other contamination from the surface of nickel alloys by immersion at room temperature. Should not be used on steel parts having hardness of 40 HRC or over.
WIP Standard
2013-02-25
This specification covers an anti-galling compound remover in the form of a water-soluble powder, a concentrated liquid for dilution with water, or a ready-to-use liquid. This remover has been used typically for removal of anti-galling compounds from turbine engine components by immersion at room temperature in a solution of the remover or ready-to-use liquid, but usage is not limited to such applications. This remover shall not be used on steel parts having hardness of 40 HRC or over.
Standard
2012-11-09
This document details the technical requirements to be used in the evaluation of materials and processes developed for use in stripping organic finishes from fixed wing commercial aircraft. The requirements herein are intended to ensure that the materials and processes used are not detrimental to the commercial aircraft when used as specified. These requirements are not intended to judge performance of the stripping method.
Standard
2012-10-11
This specification covers one type of a biodegradable, deactant-type deodorizer in the form of an aerosol-packaged liquid. Primarily for use as a deodorizer in aircraft cabins, galleys, and lavoratories to control odor by chemical reaction rather than by masking.
WIP Standard
2012-07-10
This specification covers a general purpose disinfectant in the form of a concentrated liquid to be used diluted in accordance with label instructions. This disinfectant has been used typically for disinfection of aircraft galleys, passenger service trays and drop-down table surfaces, and other hard surfaces which require disinfection, but usage is not limited to such applications. When used on surfaces which will come in direct contact with food, a potable water rinse may be required. Product may also be used for sanitizing hard surfaces in aircraft lavatories. this specification deals only with the effect of the fluid on the materials of construction used in aircraft and does not address the efficacy of the fluid. In the USA, any fluid purporting to have disinfection or sanitizing properties must be registered with the Environmental Protection Agency.
WIP Standard
2012-07-10
This specification covers one type of carpet cleaner in the form of a liquid. This cleaner has been used typically with water extraction machines for in-place cleaning of aircraft carpets, but usage is not limited to such applications.
WIP Standard
2012-07-10
This specification covers a biodegradable deodorant in the form of a liquid concentrate, solid, or gel. This deodorant has been used typically as an additive in aircraft toilet systems to control odor, color, and corrosion.
WIP Standard
2012-07-10
This specification covers a concentrated liquid primarily for disinfecting lavatories and galleys of passenger aircraft.
Standard
2012-07-09
This specification establishes the requirements for cleaning compounds, used in parts washers and spray cabinets for cleaning aircraft components.
Standard
2012-07-09
The specification establishes the requirements for a liquid cleaning compound intended for use in steam cleaning machines to clean metallic and painted, soiled surfaces.
Standard
2012-07-09
This specification covers an acidic deoxidizer in the form of a liquid.
Standard
2012-01-09
This specification covers a rust-inhibiting compound in the form of a liquid concentrate or a water soluble powder.
Standard
2011-12-15
This specification covers a corrosion-removing compound in the form of a liquid concentrate.
WIP Standard
2011-03-16
This specification covers two types of paint remover in the form of a liquid. This product has been used typically as a stripper for polyurethane/ epoxy painted aircraft wheels and landing gear, but usage is not limited to such applications.
WIP Standard
2011-03-16
This specification covers a silicone-rubber-remover compound in liquid form of a liquid supplied as a ready-to-use product. This compound has been used typically for removal of silicone rubber adhesive/sealant materials from turbine engine components by immersion at room temperature, but usage is not limited to such applications. This compound shall not be used on steel parts having hardness of 40 HRC or over.
Standard
2010-12-17
This specification covers a cleaning/scale removing compound in the form of a liquid concentrate or gel.
Standard
2010-12-13
This specification establishes the requirements for biodegradable, enzyme based, precoating surface cleaners.
Standard
2010-12-07
This specification covers powered materials, solutions of which are used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
Standard
2010-12-07
This specification covers materials in the form of a liquid used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
Standard
2010-09-28
This document details the technical requirements to be used in the evaluation of materials and processes developed for use in stripping organic finishes from fixed wing commercial aircraft. The requirements herein are intended to ensure that the materials and processes used are not detrimental to the commercial aircraft when used as specified. These requirements are not intended to judge performance of the stripping method. These requirements are intended to cover the use of both single and duplex processes involving mechanical, chemical, or thermal means, which include the following: 1) high pressure water blasting (with/without use of chemical paint softeners); 2) dry media blasting (e.g., wheat starch, plastic media blast (PMB), etc.); 3) wet media blasting (e.g., sodium bicarbonate); 4) ice-pellet blasting (e.g., CO2 or water, with/without use of chemical paint softeners); 5) chemical paint stripping (e.g., with/without a dedicated or strippable layer in the paint system); 6) thermal paint stripping (e.g., with/without the use of ice pellet stripping); and 7) other processes, may require different or additional requirements as determined necessary by the user and OEM.
Standard
2008-03-05
This specification covers a thickened, water-base, type cleaner in the form of a gel.
Viewing 1 to 30 of 242