Criteria

Text:
Display:

Results

Viewing 1 to 30 of 1794
2015-05-13
Standard
AMS3529B
This specification covers an unpigmented grade of vinyl plastic, unfilled and not containing plasticizer, in the form of sheet and film.
2015-05-13
Standard
AMS3680D
This specification covers a silica fiber insulation in the form of felted pads, flat or in rolls, as ordered.
2015-05-13
Standard
AMS3661D
This specification covers one grade of polytetrafluoroethylene (PTFE) resin in the form of film and film tape.
2015-05-13
Standard
AMS3733C
This specification covers a highly filled epoxy potting compound supplied as a two-component system.
2015-05-13
Standard
AMS3732B
This specification covers a filled epoxy resin formulation, supplied as a one-component system, requiring an oven cure for attainment of its properties.
2015-05-13
Standard
AMS3647D
This specification covers polyfluoroethylenepropylene in the form of film and sheet 0.020 inch (0.51 mm) and under in nominal thickness. These products have been used typically for electrical, electronic, and mechanical applications requiring a chemically-inert film of the fluorocarbon family, having high dielectric strength and volume resistivity, and being free from pinholes and electrical flaws. Usage is not limited to such applications.
2015-05-13
Standard
AMS3662D
This specification covers one grade of polytetrafluoroethylene resin in the form of film.
2015-05-13
Standard
AMS3652D
This specification covers one grade of polytetrafluoroethylene (PTFE) resin in the form of film, normally produced by skiving. This film has been used typically for gaskets and other parts for use up to 260 degrees C (500 degrees F) where chemical resistance or anti-stick characteristics are required but where high mechanical or electrical characteristics are not important, but usage is not limited to such applications.
2015-05-13
Standard
AMS3679C
This specification covers alumina-silica, glass, and other ceramic fiber thermal insulation in the form of felt and fabric flat sheets, rolls, or molded non-pliable blocks. Nominal thickness is 0.1 to 2.0 inches (3 to 51 mm) and nominal density is 2 to 24 pounds mass per cubic foot (32 to 384 kg/m 3 ).
2015-05-13
Standard
AMS3676D
This specification covers resin-bonded glass fibers in the form of felted pads, flat or in rolls.
2015-04-15
Standard
AMS3778/3B
This specification covers one type of nylon webbing.
2015-04-14
Standard
AMS3798/10C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/11C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/12C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/14C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/15C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/9C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/1C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3797/3C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/4C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/5C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/6C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/7C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/9C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3797/8C
This specification covers one width and one strength of integral locking slot nylon webbing.
2015-04-14
Standard
AMS3798/4C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/5C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/6C
This specification covers one width and one strength of low-modulus aramid webbing.
2015-04-14
Standard
AMS3798/7C
This specification covers one width and one strength of low-modulus aramid webbing.
Viewing 1 to 30 of 1794

Filter

  • Range:
    to:
  • Year: