Criteria

Text:
Display:

Results

Viewing 1 to 30 of 109
CURRENT
2016-05-17
Standard
AIR6552/3
This document establishes methods to obtain, store, and access data about the health of a fiber optic network using commercial sensors located in or near the transceiver. This document is intended for: Managers, Engineers, Contracting Officers, Third Party Maintenance Agencies, and Quality Assurance.
2016-02-17
WIP Standard
ARP6366
This ARP document defines a comprehensive and widely-accepted set of guidelines for use or design of fiber optic sensors on aerospace applications.
2015-12-30
WIP Standard
AS6250/3
This standard defines the design, performance and interoperability requirements for a fiber optic expanded beam, pin and socket termini incorporating a C-LENS configuration terminated onto single mode or multimode optical fiber for installation in MIL-DTL-38999 Series III size 16 cavities.
2015-09-16
WIP Standard
AS5405
This specification covers design and performance requirements of mechanical fiber optic cable splices for optical distribution systems in aerospace vehicles and provides directions for qualification and procurement of such devices.
2015-09-16
WIP Standard
AS5405/1
THE REQUIREMENTS FOR PROCURING THE FIBER OPTIC SPICES DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION AND THE LATEST ISSUE OF: SAE AS5405
CURRENT
2015-07-04
Standard
AS6479/1
This detail specification defines fiber optic fusion splicers acceptable for the installation and repair of a wide range of optical fibers and cables with virtually no insertion loss in hazardous environments (potentially flammable or explosive atmospheres, Type I), particularly aerospace applications. The requirements for acquiring the splicer described herein shall consist of this specification and the latest issue of AS6479.
CURRENT
2015-07-04
Standard
AS6479/2
This detail specification defines fiber optic fusion splicers acceptable for the installation and repair of a wide range of optical fibers and cables with virtually no insertion loss, particularly in aerospace applications, but not in flammable or explosive atmospheres (Type II). The requirements for acquiring the splicer described herein shall consist of this specification and the latest issue of AS6479.
CURRENT
2015-06-12
Standard
AIR6258
This document is intended to describe technologies available, application needs, and operational requirements relating to the use of fiber optic sensing systems on aerospace platforms: To define standard terminology used in describing fiber optic sensing systems and their performance. To identify current interfaces used for fiber optic sensing systems. To define environmental, reliability, and maintainability capabilities of fiber optic sensing system components. To describe the fiber optic sensor and instrumentation technologies that forms the current state of the art. To describe current and future unmet needs of the aerospace industry for measurements using fiber optic sensors.
CURRENT
2015-06-12
Standard
AIR6282
This standard provides a cross reference detailing current test methods used in the qualification processes of fiber optic connectors, termini and cables for aerospace, telecommunications and naval applications. The cross-reference allows the end user to select the test methods most suitable for qualifying a component, or to identify alternative test methods where a specific test is not defined in a referenced document. The standard also provides information on what area each type of referenced document has been developed for.
2015-01-26
WIP Standard
AIR6318
This document is intended for discrete and integrated digital, wavelength division multiplexing (WDM), and analog/radio frequency (RF) photonic components developed for eventual transition to aerospace platforms. The document provides the reasons for verification and validation of photonic device reliability and packaging durability. The document also provides methods for verifying and validating photonic device reliability and packaging durability. Applicable personnel include: Engineering Managers, Research and Development Managers, Program Managers, Designers, Engineers.
CURRENT
2014-12-08
Standard
AIR6112
This SAE Aerospace Information Report (AIR) provides an overview of EB technology as it applies to the aerospace fiber optic industry. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance
2014-11-07
WIP Standard
AS5659/1
This document provides a specification for the WDM Optical Backbone Network (OBN) within the SAE AS5659 WDM LAN specifications document family. The specification applies to any optical network which uses Wavelength Division Multiplexing (WDM) in any optical media, and describes a transparent optical network that contains optical components (i.e. without Optical-to-Electrical conversion). The specification describes optical network elements (ONE) that perform optical transport, optical add/drop, optical amplification, optical routing, and optical switching functions. Performance limits are given for conforming optical signal interfaces and transfer functions for the ONEs, as well as architectures comprising combinations of them. This specification will enable network and systems engineers to design and use scalable and upgradable WDM based optical networks aboard mobile platforms.
2014-11-07
WIP Standard
AS5659/2
This document describes the Client Adaptation Element (CAE), the set of functions that provides access and aggregation capability for the WDM LAN, within the SAE AS5659 WDM LAN specifications document family. In the WDM LAN, the CAE fits in between the Optical Backbone, which provides transmission of data over the transparent network, and the clients which the network serves. The complexity of the CAE depends on the types and number of clients.
2014-11-07
WIP Standard
AS5659/3
This document describes network management and control facilities for the WDM LAN, within the SAE AS5659 WDM LAN specifications document family. Unlike like point-to-point solutions, networks require a control plane to allocate the shared network resources and a management plane which provides a disciplined approach to configuring and monitoring the network. Within a Wavelength Division Multiplexed (WDM) environment, management and control provides wavelength selection and routing for traffic that is processed. The extent of network management and control depends on the design of the network, and can range from hardwired wavelengths to dynamic wavelength allocation with damage recovery.
2014-11-07
WIP Standard
AS5659/4
This specification provides guidance for the physical layer of optical networks which use Wavelength Division Multiplexing (WDM), within the SAE AS5659 WDM LAN specifications document family. The physical layer consists of cabling and connectors which provide the optical interconnections between the components and portions of the network. Performance requirements for general link connections- called the physical layer- are described. Specific sets of documents are identified, corresponding to each of several environments, which describe physical layer design, installation, maintenance, and training.
2014-11-05
WIP Standard
AIR5601A
This SAE Aerospace Information Report (AIR) is devoted to the challenges of applying optics to new advanced RF analog systems only; digital data link applications are covered elsewhere in protocol/architecture specific documents like Fibre Channel, ATM, Ethernet, Sonet, etc.
2014-10-03
WIP Standard
AS8472
This document defines methods to exchange data about the health of a fiber optic network.
2014-10-02
WIP Standard
AS6506
This document defines performance standards which fiber optic cable splices must meet to be accepted for use in aerospace platforms and environments.
2014-07-31
WIP Standard
AS6382
This SAE Aerospace Standard (AS) defines the testing methods for all aerospace optic cables. The application of the test methods are defined in the slant sheets. Technical, dimensional, mechanical and operating performance requirements for the associated aerospace fiber optic cables are detailed in the applicable specification slant sheet. In the event of conflict between this standard and the slant sheet, the slant sheet shall take precedence.
2014-04-15
WIP Standard
ARP5602/1A
This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems.
2014-04-15
WIP Standard
ARP5602/2A
This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems.
2014-04-15
WIP Standard
ARP5602/5A
This document establishes training guidelines applicable to fiber optic installer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production
2014-04-15
WIP Standard
ARP5602/6A
This document establishes training guidelines applicable to fiber optic installer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing
2014-04-15
WIP Standard
ARP5602/9A
This document establishes training guidelines applicable to fiber optic quality assurance technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production
2014-04-15
WIP Standard
ARP5602/7A
This document establishes training guidelines applicable to fiber optic technician technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production
2014-04-15
WIP Standard
ARP5602/8A
This document establishes training guidelines applicable to fiber optic technician, quality assurance, or engineer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production
2014-03-27
WIP Standard
AS5675A
To create a standard that instructs both supplier and user in the testing and characterization of initial build fiber optic cable assemblies for avionics/aerospace applications. This can be in the plant or in the avionics “box.” It includes specification of jumpers (aerospace measurement quality jumpers), end faces, link loss requirements and inspection.
CURRENT
2014-01-16
Standard
AS6479
This SAE Aerospace Standard (AS) defines fiber optic fusion splicers acceptable for the installation and repair of fiber optic interconnects in aerospace applications. Two different application environments are defined, depending on whether there is risk of flammable vapor or hazardous atmosphere being present. Equipment suited to flammable or hazardous environments may be over specified for factory, depot, or other relatively safe environments. To address these different application environments, two types of fusion splicer will be specified in applicable detail specifications: Type I. For hazardous environments specifically including potentially flammable or explosive atmospheres. Type II. For environments in which it is established that there is no risk of flammable or explosive vapors being present.
CURRENT
2014-01-03
Standard
AS6021
This SAE Aerospace Standard (AS) defines the items that shall be considered when creating a fiber optic cable assembly specification and source control drawing intended for installation on aerospace platforms.
2013-10-24
WIP Standard
ARP6283
Provide user information on best practice methods and processes for the inspection and cleaning of fiber optic termini and associated interconnect devices
Viewing 1 to 30 of 109