Criteria

Text:
Display:

Results

Viewing 1 to 30 of 100
Standard
2011-04-01
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard
2011-04-01
This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.
Standard
2009-08-17
This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position.
Standard
2009-08-17
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard
2009-08-17
This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.
Standard
2009-05-04
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
Standard
2009-04-02
Fulfillment of the intended purpose requires testing as follows: A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted. A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude. A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test). In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.) The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard
2009-04-02
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirement (6.9). This can be satisfied by using the appropriate materials or by performing any of the structural performance tests (Sections 7, 8, or 9) at -18 °C. A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence (Section 7) or the impact test sequence (Section 8 ) shall be conducted. See Figure 1. A seat belt anchorage test (Section 10). The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard
2003-05-20
This SAE Standard specifies terminology for agricultural equipment designed primarily for use in agricultural operations fo rthe production of food and fiber.
Standard
2003-05-15
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.
Standard
2003-01-24
This SAE Standard defines mounting devices for use with warning lamps and SMV emblems.
Standard
2002-08-29
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirement (6.9). This can be satisfied by using the appropriate materials or by performing any of the structural performance tests (Sections 7, 8, or 9) at -18 °C. A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence (Section 7) or the impact test sequence (Section 8 ) shall be conducted. See Figure 1. A seat belt anchorage test (Section 10). The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard
2002-08-22
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data. This document establishes test and performance requirements for overhead protection to minimize the frequency and severity of operator injury due to falling objects encountered in normal operation of a wheeled agricultural tractor.
Standard
2002-08-22
This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.
Standard
2001-03-02
This SAE Standard specifies the essential interface dimensions, the installation dimensions and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.
Standard
2000-06-28
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
Standard
1999-11-22
Fulfillment of the intended purpose requires testing as follows: A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted. A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude. A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test). In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.) The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard
1999-11-22
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
Standard
1997-09-01
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3468 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirmenet. This can be satisfied by using the appropriate materials or by performing any of the structural performance tests at -18 degrees C. A laboratory test, under repeatable and controlled loading, to permit anaysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence or the impact test sequence shall be conducted. A set belt anchorage test. The test procedures and performance requirements outlined in this document are based on currently available engineering data. The purpose of this document is to establish the test and performance requirements of a roll-over protective structure (ROPS), designed for wheeled agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental tractor upset.
Standard
1997-07-01
This SAE Standard specifies terminology for agricultural equipment designed primarily for use in agricultural operations for production of food and fiber. This terminology is intended to establish uniformity for terms used for agricultural equipment in standards, technical papers, specifications, and general usage.
Standard
1996-08-01
This standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural tractors.
Standard
1996-07-01
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.
Standard
1996-07-01
This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers. It is intended to establish those dimensions which are necessary to assure adequate clearance between components and to assure proper functioning of the tractor-implement combination when the implement is attached to the tractor by means of quick-attaching coupler. Design of the latching mechanism and individual components of the coupler not restricted by this document are left to the discretion of the manufacturer.
Standard
1996-07-01
This SAE Standard was prepared to assist manufacturers of tractors and implements in providing suitable means of transmitting power from the tractor power take-off to the implement and satisfactory hitching of the implement to the tractor.
Standard
1993-06-01
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique identification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identification emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objets or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 3.2. The purpose of this standard is to establish specifications which define a unique identification emblem to be used only for slow-moving vehicles when operated or traveling on highways.
Standard
1993-06-01
This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers. It is intended to establish those dimensions which are necessary to assure adequate clearance between components and to assure proper functioning of the tractor-implement combination when the implement is attached to the tractor by means of quick-attaching coupler. Design of the latching mechanism and individual components of the coupler not restricted by this document are left to the discretion of the manufacturer.
Standard
1993-06-01
This standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural tractors.
Standard
1993-06-01
This SAE Standard sets forth requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors by means of a three-point free-link in association with a power lift.
Standard
1993-06-01
This SAE Standard is to provide a means of securement in shipment of agricultural equipment on railroad flat cars and flatbed trucks by utilizing a T-hook and slot method. This SAE Standard is to provide standardized restraining slots, in accordance with product weight category and test requirements, to be incorporated in agricultural equipment that will be shipped, utilizing a T-hook and slot method of tiedown.
Viewing 1 to 30 of 100