Criteria

Text:
Display:

Results

Viewing 1 to 30 of 68
2009-02-05
Standard
J563_200902
This standard is intended to cover cigar or cigarette lighters as well as power outlets based on the form and dimensions of the cigar lighter, and accessory plugs for use in these devices. Components covered herein are designed to work in nominal 12 VDC systems. This standard is a full performance specification. It includes dimensional and operational parameters as well as performance characteristics which must be met when submitting a cigar lighter assembly, power outlet assembly, or plug for production approval. This standard constitutes an acceptance specification for these devices. This standard covers the operational, reliability, durability, acceptance, and testing requirements for a cigar lighter (also referred to as just "lighter") for installation in the passenger compartment of production vehicles. This standard covers power outlets that are based on the form and dimensions of the lighter receptacle intended for installation in the passenger compartment of production vehicles.
2002-04-24
Standard
J2576_200204
This SAE Recommended Practice defines the blade fuse styles, test conditions, procedures, and performance requirements for use in vehicle electrical power systems designed to the new motor vehicle industry 42 V architecture. The intent of this document is to provide a framework for 58 V Blade Fuse characteristics, serving the motor vehicle industry to establish standardization with respect to electrical performance and mechanical requirements. This standardization shall lend itself to safe application practices; e.g., prevention of 32 V devices utilized inappropriately in 42 V electrical systems. Both the performance and mechanical requirements expressed herein are for the advancement of mobility engineering and the development of safe application practices. They are not intended for the establishment of design exclusions, patent rights, or franchising that engenders restraint of trade.
2000-09-07
Standard
J2544_200009
This SAE Standard covers standard test methods for environmental, mechanical, and electrical testing of plug-in relays used in surface vehicle electrical systems.
1999-07-15
Standard
J2068_199907
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.
1999-07-15
Standard
J1054_199907
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V warning lamp alternating flashers.
1999-07-15
Standard
J945_199907
This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V hazard warning flashers. Document cancelled 1999. Information now contained in J1690
1999-07-15
Standard
J590_199907
This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal flashers. Document cancelled in 1999. Information now contained in J1690
1998-05-01
Standard
J2456_199805
Mercury capsules have been used in the automotive industry in various switching applications. the basic design and performance characteristics of mercury switches (or capsules) make these components particularly suited to underhood light and trunk light applications. The processes described in this SAe standard deal with the location, removal, storage, and recycling of mercury switches and capsules associated with these underhood and trunk light applications.
1996-08-01
Standard
J1690_199608
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal, hazard warning, warning lamp alternating, and combination flashers.
1994-12-01
Standard
J2068_199412
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.
1994-09-01
Standard
J1054_199409
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V warning lamp alternating flashers.
1993-06-01
Standard
J945_199306
This SAE Standard defines the test conditions, procedures and minimum design requirements for nominal 6, 12, and 24 volt hazard warning signal flashers.
1993-04-01
Standard
J590_199304
This SAE Standard defines the test conditions, procedures and minimum design requirements for nominal 6, 12 and 24 V turn signal flashers.
1991-12-01
Standard
J2108_199112
This SAE Recommended Practice defines the test conditions, procedures, and performance requirements for 6, 12, and 24 V Door Courtesy Switches which are intended for use in motor vehicles.
1991-06-01
Standard
J2108_199106
This SAE Recommended Practice defines the test conditions, procedures, and performance requirements for 6, 12, and 24 V Door Courtesy Switches which are intended for use in motor vehicles.
1990-11-01
Standard
J1888_199011
The fuses shown in Figure 1 are used in motor vehicles, boats, and trailers to protect electrical wiring. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.
1990-11-01
Standard
J2077_199011
The fuses shown in Figure 1 are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.
1990-03-16
Standard
J1076_199003
This standard defines the test conditions, procedures and performance specification for 6, 12, and 24 V backup lamp switches which are intended for use in motor vehicles.
1990-03-16
Standard
J564_199003
This SAE Standard J564 defines the test conditions, procedures and performance specification for 6, 12, and 24 V manually actuated headlamp beam control switches.
1990-03-16
Standard
J563_199003
This SAE Standard covers the basic cigar lighter receptacle, which may optionally incorporate overload protective devices.
1990-01-01
Standard
J2068_199001
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.
1989-10-01
Standard
J1054_198910
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V warning lamp alternating flashers.
1988-10-01
Standard
J910_198810
This standard defines the test conditions, procedures and performance specifications for 6, 12 and 24-V manually actuated hazard warning signal switch.
1988-06-01
Standard
J249_198806
This standard defines the test conditions, procedures, and performance specifications for 6-, 12-, and 24-V manually actuated mechanical stop lamp switches.
1988-04-01
Standard
J1284_198804
The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements. A fuse is a device designed to interrupt the electrical circuit when subjected to overcurrents. This action is to be nonreversible, and the fuse is intended to be replaced after the circuit malfunction has been corrected.
1987-08-01
Standard
J554_198708
The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements. A fuse is a device designed to open the electrical circuit when subjected to overcurrents that could damage the circuit or equipment. This action is to be nonreversible, and the fuse is intended to be replaced after the circuit malfunction has been corrected. the fuses shown shall have clear glass tubes. End caps shall be of brass, copper, or other copper alloy and shall be plated with nickel or other suitable material having satisfactory electrical and corrosion protective properties.
1987-06-01
Standard
J945_198706
This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V hazard warning flashers. Document cancelled 1999. Information now contained in J1690
1986-07-01
Standard
J590_198607
This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal flashers. Document cancelled in 1999. Information now contained in J1690
1979-12-01
Standard
J1284_197912
The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements. A fuse is a device designed to interrupt the electrical circuit when subjected to overcurrents. This action is to be nonreversible, and the fuse is intended to be replaced after the circuit malfunction has been corrected.
1978-05-01
Standard
J554B_197805
The fuses shown are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements. A fuse is a device designed to open the electrical circuit when subjected to overcurrents that could damage the circuit or equipment. This action is to be nonreversible, and the fuse is intended to be replaced after the circuit malfunction has been corrected. the fuses shown shall have clear glass tubes. End caps shall be of brass, copper, or other copper alloy and shall be plated with nickel or other suitable material having satisfactory electrical and corrosion protective properties.
Viewing 1 to 30 of 68