Criteria

Text:
Display:

Results

Viewing 1 to 30 of 74
WIP Standard
2013-06-28
The purpose of this SAE Recommended Practice is to establish the minimum performance requirements of devices which signal and/or automatically prevent two-blocking. This SAE Recommended practice applies to cranes in lifting crane service which are equipped with two-block warning and/or limit systems.
WIP Standard
2013-06-28
The purpose of this recommended practice is to establish the minimum performance requirements for devices used to indicate to the crane operator by visual, audible, or tactile means the movement of a rope drum. This SAE Recommended Practice applies to cranes when used in lifting crane service which are equipped with rope drum rotation indicating devices.
Standard
2013-06-17
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type (Figure 1). Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee.
Standard
2013-04-18
This SAE Standard covers minimum dimensional relationship for sheaves, drums, and wire rope for mobile, construction type lift cranes.
Standard
2013-03-28
To establish conditions to be taken into consideration in determining rated loads for mobile cranes when overturning stability is the controlling factor. This recommended practice applies to mobile, construction-type lifting cranes with either lattice booms or cantilevered, telescopic booms.
WIP Standard
2013-03-19
This analysis applies to crane types as covered by Power crane and shovel Association Standard Number Two, Mobile Hydraulic Crane standards and ANSI B30.15; refer to 5.1. This calculation method has been established to illustrate an analysis to determine the competence of hydraulic telescopic cantilevered crane booms.
Standard
2012-08-20
This SAE Standard applies to mobile construction-type lifting cranes utilizing rope-supported, conventional and luffing type lattice boom crane structures.
Standard
2012-06-04
This SAE Standard applies to all mobile, construction-type, lifting cranes as equipped for operation with hook, clamshell, magnet, and grapple attachments. It is not applicable to excavating and demolition attachments such as shovels, hoes, draglines, and wrecking balls. The purpose of this document is to set forth wire-rope strength factors that have been proved by design and operating practice to be consistent with safety, economy, space, weight, and other requirements peculiar to mobile, construction-type, lifting cranes.
Standard
2012-05-02
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices. The purpose of this recommended practice is to establish the minimum performance requirements of systems which measure and display to the operator, or other responsible persons, the boom length at which a load is being lifted by cranes with variable length, telescopic booms.
Standard
2012-05-02
This SAE Recommended Practice applies to cranes used in lifting-crane service which are equipped with radius-of-load or boom angle indicating devices. The purpose of this document is to establish the minimum performance criteria of systems which measure and display to the operator and/or other responsible persons the radius-of-load or boom angle at which the load is being lifted.
Standard
2012-05-02
The purpose of this recommended practice is to establish the minimum performance criteria for systems used to measure and display to the operator, and/or other responsible persons, the weight of the load being lifted. It is not the intent of this recommended practice to define the requirements and use of weight measuring devices used in commerce or other industries. This SAE Recommended Practice applies to cranes equipped with load indicating devices used in lifting crane service.
WIP Standard
2012-03-06
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
Standard
2012-02-21
This recommended practice applies to mobile construction type cranes with cantilevered, telescopic booms when used in lifting crane service.
WIP Standard
2012-02-14
This code applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. The object of this test is to determine the hoist line speed that a mobile crane develops while hoisting a specified load with a specified condition of rope layers on the drum. The specified load is reported in pounds and the hoist line speed in feet per minute. Values derived may be used to calculate hoist line power.
Standard
2012-02-06
This SAE Recommended Practice applies to the boomstop for the main boom of all mobile construction type cranes having rope supported booms, equipped for hook work, clamshell, magnet, grapple, or concrete bucket attachments.
Standard
2012-02-06
This SAE Standard includes names of major components and parts peculiar to this type of equipment. The illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanisms and to identify useful dimensional relationships.
WIP Standard
2012-01-10
This SAE Standard applies to machines as defined in Appendix A. Some of these machines can travel on-highway, but function primarily off-highway. This document specifies braking system performance and test criteria for rubber-tired cranes as defined in the scope and is a guideline to enable uniform evaluation of the braking capability of these machines. Service, secondary, and parking brake systems are included.
WIP Standard
2011-12-16
This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. it is not applicable to cranes wherein the capacity of the crane is based on structural strength or available hoisting power. The purpose of this test is to determine the maximum capacity of a crane to counterbalance loads applied on its hook block. The capacity of the crane is reported in terms of the load in kilograms (pounds) and its corresponding radius in meters (feet) for a specified position of the upperstructure with respect to the mounting.
Standard
2011-08-04
This SAE Standard applies to cranes which are equipped to adjust the boom angle by hoisting and lowering means through rope reeving. The purpose of this standard is to define the function and to stipulate the requirements of an automatic device to prevent raising a variable angle boom above its highest specified angle.
Standard
2008-10-27
This recommended practice specifies criteria for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails and entrance openings which permit access to and from operator, inspection or maintenance platforms on mobile cranes parked in accordance with the manufacturer's instruction. It also presents requirements for guards and restraints as related to moving parts.
Standard
2007-11-16
The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14.
Standard
2007-11-16
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
Standard
2007-11-16
This analysis applies to crane types as covered by Power crane and shovel Association Standard Number Two, Mobile Hydraulic Crane standards and ANSI B30.15; refer to 5.1. This calculation method has been established to illustrate an analysis to determine the competence of hydraulic telescopic cantilevered crane booms.
Standard
2007-11-16
The purpose of this SAE Recommended Practice is to establish the minimum performance requirements of devices which signal and/or automatically prevent two-blocking. This SAE Recommended practice applies to cranes in lifting crane service which are equipped with two-block warning and/or limit systems.
Standard
2007-11-16
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.
Standard
2007-11-16
The purpose of this recommended practice is to establish the minimum performance requirements for devices used to indicate to the crane operator by visual, audible, or tactile means the movement of a rope drum. This SAE Recommended Practice applies to cranes when used in lifting crane service which are equipped with rope drum rotation indicating devices.
Standard
2003-06-10
This SAE Standard applies to mobile construction-type lifting cranes utilizing rope-supported, conventional and luffing type lattice boom crane structures.
Standard
2003-01-21
This SAE Standard includes names of major components and parts peculiar to this type of equipment. The illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanisms and to identify useful dimensional relationships.
Standard
2002-10-30
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
Standard
2000-06-29
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.
Viewing 1 to 30 of 74