Refine Your Search

Date

Date

Topic

Topic

Snowmobile Technical Committee

Search Results

Viewing 21 to 40 of 143
<< First< Previous1234Next >Last >>
Sort by relevance
Standard

Recommendations for Children’s Snowmobile
2020-01-15
CURRENT
J1038_202001
This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.
Standard

Maximum Exterior Sound Level for Snowmobiles
2020-01-15
HISTORICAL
J192_202001
This SAE standard establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Tests for Snowmobile Switching Devices and Components
2019-10-07
CURRENT
J68_201910
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Snowmobile Passenger Handgrips
2019-07-24
CURRENT
J1062_201907
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained, and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

Speed Control Assurance for Snowmobiles
2019-07-19
WIP
J1222
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Snowmobile Throttle Control Systems
2019-06-06
CURRENT
J92_201906
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand-control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Brake Control Systems
2019-02-27
HISTORICAL
J1282_201902
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Maximum Exterior Sound Level for Snowmobiles
2019-01-23
HISTORICAL
J192_201901
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Brake System Test Procedure - Snowmobiles
2018-11-14
HISTORICAL
J45_201811
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats
2018-11-14
CURRENT
J89_201811
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Snowmobile Drive Mechanisms
2018-06-12
CURRENT
J1279_201806
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Snowmobile Definitions and Nomenclature - General
2017-07-21
HISTORICAL
J33_201707
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Tests for Snowmobile Switching Devices and Components
2017-04-04
HISTORICAL
J68_201704
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Brake System Test Procedure - Snowmobiles
2016-08-09
HISTORICAL
J45_201608
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Snowmobile Probe Test for Contact with Power Driven Parts
2016-02-18
HISTORICAL
J2826_201602
This SAE Recommended Practice establishes the test equipment, procedure, and acceptance criteria necessary to determine the location of power driven components that could, upon inadvertent contact by an operator, passenger, or bystander, inflict injury.
Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues
2015-11-24
HISTORICAL
J2641_201511
This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.
Standard

Recommendations for Children's Snowmobile
2015-11-24
HISTORICAL
J1038_201511
This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.
<< First< Previous1234Next >Last >>
X