Criteria

Text:
Content:
Display:

Results

Viewing 151 to 180 of 45396
HISTORICAL
2003-01-07
Standard
AMS4897A
This specification covers a titanium alloy in the form of sheet and strip.
HISTORICAL
1997-01-01
Standard
AMS4897
This specification covers a titanium alloy in the form of sheet and strip. These products have been used typically for parts tob e formed in the solution heat treated condition and subsequently precipitation heat treated to obtain high strength-to-weight ratio or stability up to 1100 degrees F (593 degrees C), but usage is not limited to such applications.
HISTORICAL
2011-09-13
Standard
AMS4897C
This specification covers a titanium alloy in the form of sheet and strip.
CURRENT
2017-08-25
Standard
AMS4893D
This specification covers a nickel-copper alloy in the form of castings.
HISTORICAL
2001-11-20
Standard
AMS4898A
This specification covers a titanium alloy in the form of sheet. This sheet has been used typically for parts requiring high strength, toughness, and fatigue strength up to 750 degrees F (399 degrees C), but usage is not limited to such applications. The product an be super-plastically formed above 1500 degrees F (816 degrees C) and it can be aged after air cooling from the solution treatment or super-plastic forming temperature to increase the strength. Certain processing procedures and service conditions may cause this sheet to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize surch conditions.
HISTORICAL
1996-09-01
Standard
AMS4898
This specification covers a titanium alloy in the form of sheet.
CURRENT
2016-09-13
Standard
AMS4897D
This specification covers a titanium alloy in the form of sheet and strip 0.125 inch (3.18 mm) and under in nominal thickness.
2017-04-04
WIP Standard
AMS4898E
This specification covers a titanium alloy in the form of sheet in nominal thicknesses 0.016 through 0.1874 inch (0.41 through 4.760 mm).
HISTORICAL
2007-08-24
Standard
AMS4897B
This specification covers a titanium alloy in the form of sheet and strip.
CURRENT
2014-01-16
Standard
AMS4898D
This specification covers a titanium alloy in the form of sheet in nominal thicknesses 0.016 through 0.1874 inch (0.41 through 4.760 mm).
HISTORICAL
2008-12-19
Standard
AMS4898C
This specification covers a titanium alloy in the form of sheet.
HISTORICAL
2007-05-15
Standard
AMS4898B
This specification covers a titanium alloy in the form of sheet.
HISTORICAL
2011-09-13
Standard
AMS4899C
This specification covers a titanium alloy in the form of sheet, strip, and plate.
HISTORICAL
2007-10-16
Standard
AMS4899B
This specification covers a titanium alloy in the form of sheet, strip, and plate.
HISTORICAL
2003-01-07
Standard
AMS4899A
This specification covers a titanium alloy in the form of sheet, strip, and plate.
HISTORICAL
1996-04-01
Standard
AMS4899
This specification covers a titanium alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring high fracture toughness, fatigue strength, formability, and strenth up to 480 degrees F (249 degrees C), but usage is not limited to such applications. The alloy is superplastic below 1520 degrees F (827 degrees C) and hot formable from 1200 to 1560 degrees F (649 to 849 degrees C).
CURRENT
2016-06-07
Standard
AMS4899D
This specification covers a titanium alloy in the form of sheet, strip, and plate up through 4.000 inches (101.60 mm), inclusive.
HISTORICAL
1999-10-01
Standard
AMS4937A
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings. These products have been used typically for parts requiring high strength up to 750 °F (399 °C), particularly those parts machined and/or flash- butt welded in the annealed condition with the option of subsequent solution and precipitation heat treatment, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
HISTORICAL
1971-11-15
Standard
AMS4936
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
CURRENT
2017-09-05
Standard
AMS4935L
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides, and stock for flash welded rings.
HISTORICAL
1977-01-15
Standard
AMS4936A
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1994-09-01
Standard
AMS4936D
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1990-01-01
Standard
AMS4936C
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1984-10-01
Standard
AMS4936B
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1999-03-01
Standard
AMS4937
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
CURRENT
2002-07-23
Standard
AMS4936E
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1968-05-01
Standard
AMS4935B
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
1975-06-15
Standard
AMS4935C
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
1994-04-01
Standard
AMS4935F
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
1977-01-15
Standard
AMS4935D
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
Viewing 151 to 180 of 45396

Filter

  • Standard
    45396
  • Range:
    to:
  • Year: