Search Results

Standard

High-Temperature Power Steering Pressure Hose

2001-04-02

HISTORICAL

J2050_200104

This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of −40 to +150 °C (−40 to +302 °F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.

Standard

Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 - 45

2001-04-01

HISTORICAL

AMS3363D

This specification covers a silicone rubber in the form of a two-component liquid compound.

Standard

Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55

2001-04-01

HISTORICAL

AMS3364C

This specification covers a silicone rubber in the form of a two-component liquid compound.

Standard

Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant

2001-04-01

HISTORICAL

AMS7284A

This specification and its associated detail specifications cover phosphonitrilic fluoroelastomers (FZ) in the form of molded rings.

Standard

Installation, Heaters, Airplane, Internal Combustion Heater Exchange Type

2001-04-01

CURRENT

ARP266A

To provide a recommended practice covering the recommended safety and performance practices found desirable in service in the installation of combustion heaters, as specified in Society of Automotive Engineers Aeronautical Standard AS143 and certain auxiliary devices which are considered necessary to the safety and performance of the heaters as used in certain aircraft.

Standard

GASKET, RUBBER, SYNTHETIC

2001-04-01

HISTORICAL

AS51007

Standard

Glossary, Aircraft Engine Starting and Auxiliary Power Systems

2001-04-01

CURRENT

ARP906B

The Aircraft Engine Starting and Auxiliary Power System Glossary presents definitions of terms commonly encountered and associated with aircraft engine starting and auxiliary power systems. Terms have been arranged alphabetically.

Standard

AS8671 Capping (Cable Duct) 1.28" Wide Fire Resistant

2001-04-01

CURRENT

AS8671-4

No scope available.

Standard

Peening of Metals

2001-04-01

HISTORICAL

AMSP81985

This specification covers procedures and requirements for dry peening the surfaces of metals by impingement of metallic shot or glass beads for the purpose of increasing the fatigue strength and resistance to stress corrosion cracking by inducing residual compressive stresses in specified surfaces.

Standard

Lubricating Oil, Instrument, Ball Bearing, High Flash Point

2001-04-01

HISTORICAL

AMSL81846

This specification covers the requirements for one grade of a specialty lubricating oil for use in precision instrument and miniature ball bearings.

Standard

Rotary Flap Peening of Metal Parts

2001-04-01

HISTORICAL

AMSR81841

This specification covers procedures and requirements for peening of metal parts with portable bonded-shot rotary flap wheels (see 6.1).

Standard

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

2001-04-01

HISTORICAL

AMST81533

This specification covers the requirements of inhibited 1,1,1 trichloroethane for vapor degreasing, (see 6.1).

Standard

Titanium and Titanium Alloys, Extruded Bars and Shapes, Aircraft Quality

2001-04-01

HISTORICAL

AMST81556

This specification covers aircraft quality titanium and titanium alloy extruded metal bar and shape products.

Standard

Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C)

2001-04-01

HISTORICAL

AMS5035

This specification covers a low-alloy steel in the form of welding wire.

Standard

Foam, Flexible Polyurethane Open Cell, Medium Flexibility

2001-04-01

HISTORICAL

AMS3570E

This specification covers two types of an open-cell, medium-flexibility polyurethane foam in the form of sheet, strip, and shapes.

Standard

Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing

2001-04-01

HISTORICAL

AMS3375B

This specification covers a one-part fluorosilicone (FVMQ) adhesive/ sealant, supplied in cartridges, suitable for extrusion and curing to an elastomeric material upon exposure to air. It also covers a compatible primer.

Standard

STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated

2001-04-01

HISTORICAL

AMS5549F

Standard

Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)

2001-04-01

HISTORICAL

AMS5034

This specification covers a low-alloy steel in the form of welding wire.

Standard

Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)

2001-04-01

HISTORICAL

AMS6282H

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

Standard

Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)

2001-04-01

HISTORICAL

AMS3867/3B

This specification covers one type of epoxy-resin-impregnated boron filaments 0.0080 inch (0.203 mm) in diameter in the form of continuous tape supported on a glass cloth carrier.