From hydrogen-fueled buses to AI-driven advancements and cybersecurity, this book offers an unparalleled glimpse into the future of transit. Navigate the complexities of transit planning in a post-COVID world, where innovative solutions are essential to tackle infrastructure challenges and workforce shortages.
It is essential to note that cybersecurity threats not only arise from inherent protocol defects but also consider software implementation vulnerabilities.
Since the early 1990’s, commercial vehicles have suffered from repeated vulnerability exploitations that resulted in a need for improved automotive cybersecurity. This paper outlines the strategies and challenges of implementing an automotive Zero Trust Architecture (ZTA) to secure intra-vehicle networks. ...This research successfully met the four requirements and demonstrated that using ZT principles in an on-vehicle network greatly improved the cybersecurity posture with manageable impact to system performance and deployment.
UNECE R155 explicitly references ISO/SAE 21434 and mandates a certified cybersecurity management system (CSMS) as a prerequisite for automotive manufacturers to achieve vehicle type approval and sell new vehicle types. ...However, the gap in the CSMS framework is a lack in a standardized system that provides guidance and common criteria for automakers to measure a vehicle’s level of compliance and compute a publicly accepted cybersecurity rating. To help establish increased consumer confidence, OEMs and smart mobility stakeholders could take additional proactive steps to ensure the safety and security of their products. ...This paper addresses the above requirement and discusses the cybersecurity rating framework (CSRF) that could establish a framework for rating vehicle cybersecurity by standardizing the measurement criteria, parameter vectors, process, and tools.
Abstract The United Nation Economic Commission for Europe (UNECE) Regulation 155—Cybersecurity and Cybersecurity Management System (UN R155) mandates the development of cybersecurity management systems (CSMS) as part of a vehicle’s lifecycle. ...Due to the focus of R155 and its suggested implementation guideline, ISO/SAE 21434:2021—Road Vehicle Cybersecurity Engineering, mainly centering on the alignment of cybersecurity risk management to the vehicle development lifecycle, there is a gap in knowledge of proscribed activities for validation and verification testing. ...An inherent component of the CSMS is cybersecurity risk management and assessment. Validation and verification testing is a key activity for measuring the effectiveness of risk management, and it is mandated by UN R155 for type approval.
Abstract Connected autonomous vehicles that employ internet connectivity are technologically complex, which makes them vulnerable to cyberattacks. Many cybersecurity researchers, white hat hackers, and black hat hackers have discovered numerous exploitable vulnerabilities in connected vehicles. ...This study expanded the technology acceptance model (TAM) to include cybersecurity and level of trust as determinants of technology acceptance. This study surveyed a diverse sample of 209 licensed US drivers over 18 years old.
Abstract The secure boot has successfully protected systems from executing untrusted software (SW), but low-power controllers lack sufficient time to check every memory cell while satisfying real-time functional safety requirements. Automotive controllers need to maintain security through multiple cycles of remote, unsupervised operation and safely reach a secure state when an anomaly is detected. To accelerate the boot time, we propose Sliced Secure Boot: build fingerprints by slicing orthogonally through memory blocks, protect each cell with a reusable fingerprint using a reproducible pattern with sufficient entropy, and randomly check one fingerprint pattern during boot. We do not claim that sampling offers equivalent protection to exhaustive checks but demonstrate that careful sampling can provide a sufficient level of detection while maintaining compatibility with both startup time and functional safety requirements.
Headliners from Las Vegas Big reveals abounded at the triennial CONEXPO trade show. Following are some of the most notable unveilings from the desert. Cat doubles down on diesel with new C13D platform Deere pursues electric construction machines and charging infrastructure JCB debuts clean-sheet hydrogen combustion engine Volvo CE unveils electric asphalt compactor, announces NA arrival of L350H loader Honda reveals next-gen Autonomous Work Vehicle Deere 3D-prints fuel valves for tractors HP's binder jetting technology and GKN's manufacturing expertise helped John Deere realize its first 3D-printed metal part for mass production. Returning to the SAE presidency for 2023 Setting a "prudently aggressive" mindset in advancing SAE's goals in the mobility ecosystem.
The new generation vehicles these days are managed by networked controllers. A large portion of the networks is planned with more security which has recently roused researchers to exhibit various attacks against the system. This paper talks about the liabilities of the Controller Area Network (CAN) inside In-vehicle communication protocol and a few potentials that could take due advantage of it. Moreover, this paper presents a few security measures proposed in the present examination status to defeat the attacks. In any case, the fundamental objective of this paper is to feature a comprehensive methodology known as Intrusion Detection System (IDS), which has been a significant device in getting network data in systems over many years. To the best of our insight, there is no recorded writing on a through outline of IDS execution explicitly in the CAN transport network system.
Classic vehicle production had limitations in bringing the driving commands to the actuators for vehicle motion (engine, steering and braking). Steering columns, hydraulic tubes or steel cables needed to be placed between the driver and actuator. Change began with the introduction of e-gas systems. Mechanical cables were replaced by thin, electric signal wires. The technical solutions and legal standardizations for addressing the steering and braking systems, were not defined at this time. Today, OEMs are starting E/E-Architecture transformations for manifold reasons and now have the chance to remove the long hydraulic tubes for braking and the solid metal columns used for steering. X-by-wire is the way forward and allows for higher Autonomous Driving (AD) levels for automated driving vehicles. This offers new opportunities to design the vehicle in-cabin space. This paper will start with the introduction of x-by-wire technologies.
The separation of cybersecurity considerations in RMTO is barely considered, as so far, most available research and activities are mainly focused on AV. ...The main focus of this paper is addressing RMTO cybersecurity utilising an adaptable security-by-design approach, although security-by-design is still in the infant state within automotive cybersecurity. ...The main focus of this paper is addressing RMTO cybersecurity utilising an adaptable security-by-design approach, although security-by-design is still in the infant state within automotive cybersecurity. An adaptable security-by-design approach for RMTO covers Security Engineering Life-cycle, Logical Security Layered Concept, and Security Architecture.
Using a wireless medium for tractor-trailer communication will bring new cybersecurity challenges and requirements which requires new development and lifecycle considerations.
CAN bus network proved to be efficient and dynamic for small compact cars as well as heavy-duty vehicles (HDV). However, HDVs are more susceptible to malicious attacks due to lack of security in their intra-vehicle communication protocols. SAE proposed a new standard named J1939-91C for CAN-FD networks which provides methods for establishing trust and securing mutual messages with optional encryption. J1939-91C ensures message authenticity, integrity, and confidentiality by implementing complex cryptographic operations including hash functions and random key generation. In this paper, the three main phases of J1939-91C, i.e., Network Formation, Rekeying, and Message Exchange, are simulated and tested on Electronic Control Units (ECUs) supporting CAN-FD network. Numerous test vectors were generated and validated to support SAE J1939-91C. The mentioned vectors were produced by simulating different encryption and hashing algorithms with variable message and key lengths.
Cybersecurity (CS) is crucial and significantly important in every product that is connected to the network/internet. ...Hence making it very important to guarantee that every single connected device shall have cybersecurity measures implemented to ensure the safety of the entire system. Looking into the forecasted worldwide growth in the electric vehicles (EV’s) segment, CS researchers have recently identified several vulnerabilities that exist in EV’s, electric vehicle supply equipment (EVSE) devices, communications to EVs, and upstream services, such as EVSE vendor cloud services, third party systems, and grid operators. ...Additional processes have been defined in the process reference and assessment model for the CS engineering in order to incorporate the cybersecurity related processes in the ASPICE scope. This paper aims at providing a model & brief overview to establish a correlation between the ASPICE, ISO/SAE 21434 and the ISO 26262 functional safety (FS) standards for development of a secured cybersecurity software with all the considerations that an organization can undertake.
SMSOLUTIONS0123 represents the work of a team of policy and technical leaders from over a dozen forward-leaning organizations in the ground vehicle industry and government. When asked where Sustainable Mobility Solutions could best apply the capabilities SAE has developed over a century, the SMS group responded without hesitation: address EV charging system failure. The group determined to aggregate charging session data with the view to create a consistent data dictionary and analysis practice. Adopting agile work practices, it studied these data, vetting and iterating its solution with the objective of producing a technical report in approximately half the time required in normal standardization. The resulting document, EV Charging Infrastructure: Charging System Performance Reporting, is informing work by the U.S. Department of Energy and Departments of Energy and Transportation Joint Office, as well as OEMs and suppliers.
By looking into the vehicle-infrastructure cooperation (VIC) which is oriented towards intelligent, networked and integrated development, this paper analyzes and proposes the essence and development direction of Intelligent Vehicle Infrastructure Cooperation Systems (I-VICS). With an in-depth analysis of technologies of core importance to VIC and influence factors that constrain VIC development as a whole, the paper comes up with a technological route for VIC, and identifies a direction for vehicle-infrastructure cooperative development that progresses from primary to intermediate cooperation, then to advanced cooperation, and finally to full-fledged cooperation. Policy recommendations aiming at strengthening top-level design, building an integrated vehicle-infrastructure-cloud platform, expediting independence of key techs, building robust standards and regulations for VIC, enhancing workforce development as well as greater efforts at market promotion are put forward.
To build secure systems of road vehicles, the cybersecurity engineering standard ISO21434[11] suggests the evaluation of vulnerabilities throughout engineering process, such as attack path analysis, system requirement stage, software architecture, design, and implementation and testing phases. ...With my analysis and practices, it is appropriate to include the common vulnerabilities that ought to be an integral part of the automotive cybersecurity engineering process. In this paper, the author would like to provide a list of vulnerabilities that might be a suggestion for threat analysis and risk assessment and propose two solutions that may be adopted directly in the V-model for security-relevant software development.
The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA.
The Sky is No Longer the Limit Celebrating 75 Years of Air Force Technology Air Force Technology Timeline Leveraging New Technologies for Mil/Aero Electronic Systems MOSA Enclosure Design for Military Systems Three Challenges to 5G's Military Success How to Specify and Select RF Filters Investigation of Requirements and Capabilities of Next-Generation Mine Warfare Unmanned Underwater Vehicles Model-based systems engineering (MBSE) tools, including functional flow block diagrams and functional hierarchies, are used to logically define mine countermeasure (MCM) UUV operations and support the development of alternative concepts of operations. On the Pulsed Laser Ablation of Metals and Semiconductors A comparison of effects across disparate experimental regimes through the study of pulsed laser ablation over several orders of magnitude in pulse duration, fluence, and material properties.