Search Results

COMVEC™ conference is the only North American event that addresses vehicles and equipment spanning on-highway, off-highway, agricultural, construction, industrial, military, and mining sectors.

Abstract Identity-Anonymized CAN (IA-CAN) protocol is a secure CAN protocol, which provides the sender authentication by inserting a secret sequence of anonymous IDs (A-IDs) shared among the communication nodes. To prevent malicious attacks from the IA-CAN protocol, a secure and robust system error recovery mechanism is required. This article presents a central management method of IA-CAN, named the IA-CAN with a global A-ID, where a gateway plays a central role in the session initiation and system error recovery. Each ECU self-diagnoses the system errors, and (if an error happens) it automatically resynchronizes its A-ID generation by acquiring the recovery information from the gateway. We prototype both a hardware version of an IA-CAN controller and a system for the IA-CAN with a global A-ID using the controller to verify our concept.

With the development of vehicle intelligence and the Internet of Vehicles, how to protect the safety of the vehicle network system has become a focus issue that needs to be solved urgently. The Controller Area Network (CAN) bus is currently a very widely used vehicle-mounted bus, and its security largely determines the degree of vehicle-mounted information security. The CAN bus lacks adequate protection mechanisms and is vulnerable to external attacks such as replay attacks, modifying attacks, and so on. On the basis of the existing work, this paper proposes an authentication method that combines Hash-based Message Authentication Code (HMAC)-SHA256 and Tiny Encryption Algorithm (TEA) algorithms. This method is based on dynamic identity authentication in challenge/response made and combined with the characteristics of the CAN bus itself as it achieves the identity authentication between the gateway and multiple electronic control units (ECUs).

Abstract In the pursuit of advancing autonomous vehicles (AVs), data-driven algorithms have become pivotal in replacing human perception and decision-making. While deep neural networks (DNNs) hold promise for perception tasks, the potential for catastrophic consequences due to algorithmic flaws is concerning. A well-known incident in 2016, involving a Tesla autopilot misidentifying a white truck as a cloud, underscores the risks and security vulnerabilities. In this article, we present a novel threat model and risk assessment (TARA) analysis on AV data storage, delving into potential threats and damage scenarios. Specifically, we focus on DNN parameter manipulation attacks, evaluating their impact on three distinct algorithms for traffic sign classification and lane assist.

Abstract The innovations of vehicle connectivity have been increasing dramatically to enhance the safety and user experience of driving, while the rising numbers of interfaces to the external world also bring security threats to vehicles. Many security countermeasures have been proposed and discussed to protect the systems and services against attacks. To provide an overview of the current states in this research field, we conducted a systematic mapping study (SMS) on the topic area “security countermeasures of in-vehicle communication systems.” A total of 279 papers are identified based on the defined study identification strategy and criteria. We discussed four research questions (RQs) related to the security countermeasures, validation methods, publication patterns, and research trends and gaps based on the extracted and classified data. Finally, we evaluated the validity threats and the whole mapping process.

In the “What’s Next for Aerospace and Defense: A Vision for 2050” study, AIA, New York City-based McKinsey & Company, and other industry partners reveal a comprehensive 30-year, Industry 4.0 forecast of air travel and spaceflight based on improvements in automation and digitization, next-generation materials, alternative energy sources and storage, and increased data throughput.

ARINC Report 679 defines the functional characteristics of an airborne server that will support Electronic Flight Bags (EFBs) and similar peripherals used in the flight deck, cabin, and maintenance applications. The document defines how EFBs will efficiently, effectively, safely, and securely connect to the airborne server in a way that offer expanded capabilities to aircraft operators. The airborne server has two main functions, first to provide specific services to connected systems, and second to provide centralized security for the EFB and its data. This document is a functional airborne server definition. It does not define the physical characteristics of the server.

SAE EDGE Research Reports provide examinations significant topics facing mobility industry today including Connected Automated Vehicle Technologies Electrification Advanced Manufacturing

Access control enforces security policies for controlling critical resources. For V2X (Vehicle to Everything) autonomous military vehicle fleets, network middleware systems such as ROS (Robotic Operating System) expose system resources through networked publisher/subscriber and client/server paradigms. Without proper access control, these systems are vulnerable to attacks from compromised network nodes, which may perform data poisoning attacks, flood packets on a network, or attempt to gain lateral control of other resources. Access control for robotic middleware systems has been investigated in both ROS1 and ROS2. Still, these implementations do not have mechanisms for evaluating a policy's consistency and completeness or writing expressive policies for distributed fleets. We explore an RBAC (Role-Based Access Control) mechanism layered onto ROS environments that uses local permission caches with precomputed truth tables for fast policy evaluation.

Certified Machine Learning-Based Avionics: Unlocking Safer Revolutionizing Electronic Warfare: Unleashing the Power of High-Performance Software Defined Radios Deterministic and Modular Architecture for Embedded Vehicle Systems Approximating the Material Stresses and System Requirements for Hypersonic Flight Design Approaches for Established and Emerging RF Receiver Architectures Rydberg Technologies Shows Potential of Long-Range RF with Quantum Sensor at NetModX23 New Method to Measure Wind Speed Could Unlock Drones' Potential A fundamentally different approach to wind estimation using unmanned aircraft than the vast majority of existing methods. This method uses no on-board flow sensor and does not attempt to estimate thrust or drag forces. Report on Human Factors Issues Likely to Affect Air-Launched Effects This report reviews human factors research on the supervision of multiple unmanned vehicles (UVs) as it affects human integration with Air-Launched Effects (ALE).

The Role of Autonomous Unmanned Ground Vehicle Technologies in Defense Applications Information Warfare - Staying Protected at the Edge Designing Connectivity Solutions for an Electric Aircraft Future Redesigning the Systems Engineering Process to Speed Development of E-Propulsion Aircraft Four RF Technology Trends You Need to Know for Satellite Communication Device Design Manufacturer Reduces Risk and Improves Quality of Military Radar Receivers Instrumentation for Fabrication and Testing of High-Speed Single-Rotor and Compound-Rotor Systems Precision data acquisition is required to generate a comprehensive set of measurements of the blade surface pressures, pitch link loads, hub loads, rotor wakes and performance of high-speed single-rotor and compound-rotor systems to support the development of next-generation rotorcraft.

But unfortunately, automotive cybersecurity researchers hardly produce a comprehensive detection method due to the confidential nature of Controller Area Network (CAN) DBC format files, which is a standard long maintained by car manufacturers.

Abstract The automotive industry intends to create new services that involve sharing vehicle control information via a wide area network. In modern vehicles, an in-vehicle network shares information between more than 70 electronic control units (ECUs) inside a vehicle while it is driven. However, such a complicated system configuration can result in security vulnerabilities. The possibility of cyber-attacks on vehicles via external services has been demonstrated in many research projects. As advances in vehicle systems (e.g., autonomous drive) progress, the number of vulnerabilities to be exploited by cyber-attacks will also increase. Therefore, future vehicles need security measures to detect unknown cyber-attacks. We propose anomaly-based intrusion detection to detect unknown cyber-attacks for the Control Area Network (CAN) protocol, which is popular as a communication protocol for in-vehicle networks.

In adjusting the data flow, this is an option to increase the cybersecurity for a complete system. This addition to the cybersecurity system provides a clear benefit. ...While this is the traditional application experienced, there are other applications relevant to cybersecurity. As part of the blockchain technology, the nodes are responsible for decision-making.

Argus, a global leader in automotive cybersecurity, has upgraded its stand-alone Fleet Protection backend platform and is now providing continuous live monitoring of both automotive and commercial aircraft fleets.

Abstract Over the past forty years, the Electronic Control Unit (ECU) technology has grown in both sophistication and volume in the automotive sector, and modern vehicles may comprise hundreds of ECUs. ECUs typically communicate via a bus-based network architecture to collectively support a broad range of safety-critical capabilities, such as obstacle avoidance, lane management, and adaptive cruise control. However, this technology evolution has also brought about risks: if ECU firmware is compromised, then vehicle safety may be compromised. Recent experiments and demonstrations have shown that ECU firmware is not only poorly protected but also that compromised firmware may pose safety risks to occupants and bystanders.

Ransomware is not a new method of malware infection. This historically had been experienced in the enterprise in nearly every industry. This has been especially problematic in the medical and manufacturing fields. As the attackers saturate the specifically targeted industries, the attackers will expand their target industries. One of these which has not been significantly explored by the ransomware groups are the embedded systems and automobile environment. This set of targets is massive and provides for a vast attack potential. While this has not experienced this attack methodology at length, the research and efforts are creeping towards this as a natural extension of the business. The research focusses on the history of ransomware, uses in the enterprise, possible attack vectors with ground vehicles, and defenses to be explored and implemented to secure automobiles, fleets, and the industries.

October 29-31, 2019 │ Novi, MI

October 29-31, 2019 │ Novi, MI