Search Results

Each accident in this sample is modeled numerically by the simulation tool PC-Crash. In parallel, a model representing the function of an AEB system has been established.

A range of simulated pole impact tests at various speeds and impact angles were conducted using LS-Dyna and PC-Crash. Publicly available Finite Element Vehicle models of a 1996 Ford Taurus, a 1994 Chevrolet C2500 and a 1997 Geo Metro (Suzuki Swift) were used, providing relationships among impact speeds, crush depths and impact angles.

Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data. The authors modeled 26 handling tests. PC-Crash appeared to be a reasonable tool for modeling gross vehicle response. ...This research compares vehicle dynamic simulations in PC-Crash 8.2 to data recorded during instrumented handling tests conducted by Mechanical Systems Analysis Incorporated (MSAI). ...Vehicle weight, center of gravity (c.g) position, suspension stiffness parameters, tire parameters, steering angle, and vehicle speed data provided by MSAI were used as input for the PC-Crash model. Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data.

This study focuses on one program, PC-CRASH. This program was developed to allow simulations of vehicle 3-dimensional movements before, during and after the impact.

Five collisions were staged in order to evaluate PC-Crash, a simulation program used for investigating motor vehicle collisions. Both vehicles were moving in all of the staged collisions at 1:1 or 2:1 speed ratios. ...Firstly, collision parameters were calculated from measured data, and used as input to the PC-Crash collision model. Secondly, the post-impact vehicle paths and rest positions were used to determine the pre-impact speeds. ...Using the PC-Crash "Optimizer" to reconstruct the five collisions, the error in calculated pre-impact speeds of the ten vehicles ranged from-3.3 to +4.1 km/h.

This paper describes in detail the extension of the discrete kinetic time forward simulation program PC-Crash to deal with multi-body-systems. As one application of this model pedestrians have been modeled.

This paper presents the trajectory and collision models on which PC-CRASH is based. PC-CRASH'S model for predicting the 3D kinematics of a vehicle's pre- and post-impact trajectory, which is based on a discrete- kinetic time forward simulation of vehicle dynamics rather than empirically-derived “spin-out coefficients”, is described. ...PC-CRASH is a windowso-based accident-reconstruction program which combines the simulation of pre-collision, collision, and post-collision dynamics for multiple vehicles in a graphical environment.

PC-Crash is a Windows™ - based accident reconstruction program developed in Graz, Austria by Dr. Hermann Steffan. ...Hermann Steffan. PC-Crash collision analysis results are compared with previously published staged collision data. ...The staged collisions were reconstructed using PC-Crash and the trajectories were compared to actual measurements of the skid marks and rest positions.