Search Results

In recent years, the tractor-semitrailer combination has become the primary vehicle of China's long-distance freight system. In this paper, with the aim of optimizing the path tracking control and following control of the tractor-semitrailer combination, a kinematics-based path tracking control scheme is proposed. Firstly, a kinematic model of the tractor-semitrailer combination has been constructed. The control of the tractor-semitrailer combination is simplified to focus on three control points based on the kinematics model. Secondly, the path tracking control algorithm and the following control algorithm of the tractor-semitrailer combination are proposed in this paper. The improved MPC is used for path-tracking control of tractor-semitrailer combinations. The cost function of rolling optimization steps is intended, and the optimal line is determined with the lateral deviation, the variation of lateral error, and the deviation of heading angle as the input.

This paper proposes a method to adapt backward induction, which is used to solve the vehicle speed optimal control problem for energy efficiency, to a computer with a GPU to accelerate the computation. A common application of this type of problem is to control a vehicle on a given route with surrounding vehicles, road grades, traffic signals, stop signs, speed limits, and other conditions. Several indicators can be used to determine the performance of the controller, including the energy consumption of the trip, the driving speed smoothness, and the traveling time to a given destination. Solving this optimization problem globally by backward induction is time-consuming, due to the large searching space of the vehicle’s distance, velocity, and acceleration. The proposed method converts the single thread implementation to a parallel process that runs on a consumer-level GPU.

When the drill arm reaches the specified position, the rubber top disk of the propelling beam is pressed against the rock surface by the hydraulic cylinder force and the rock drill starts drilling. Because of the reaction force and the deformation of the drill arm, the propelling beam will be offset from its target position and vibrate, which will affect the drilling accuracy. To analyze the vibration of the propelling beam, the rigid-flexible coupled model is established. The minimum displacement offset of the propelling beam from the initial position is used as the optimization function and the parameters of the rubber top disk are used as optimization variables. The amplitude of the propelling beam at a steady state is used as the constraint. From the simulation results, the rigid-flexible coupled model can describe the vibration of the propelling beam better than the rigid model, especially during the rock drill working stage.

The automatic emergency braking (AEB) system is an important part of automobile active safety, which can effectively reduce rear-end collision accidents and protect drivers' safety through active braking. AEB system has been included in many countries' new car assessment programme as the test content of active safety. In view of obviously deficiencies of the existing AEB control algorithm in avoiding longitudinal collision at high speed, it is proposed to an optimized model of the minimum safe distance for rear-end collision prevention on high-speed road in order to improve the accuracy of AEB system. Considering the influence of road adhesion coefficient and human comfort on the maximum braking deceleration, it is established to a more accurate and reasonable AEB system to avoid collision for expressway. The collision avoidance strategy is verified by simulation software.

Tyre behavior plays an important role in vehicle dynamics simulation. The Magic Formula Tyre Model is a semi-empirical tyre model which describes tyre behavior quite accurately in the handling simulation. The Magic Formula Tyre Model needs a set of parameters to describe the tyre properties; the determination of these parameters is nontrivial task due to its nonlinear nature and the presence of a large number of coefficients. In this paper, the homotopy algorithm is applied to the parameter identification of Magic Formula tyre model. A morphing parameter is introduced to correct the optimization process; as a result, the solution is directed converging to the global optimal solution, avoiding the local convergence. The method uses different continuation methods to globally optimize the parameters, which ensures that the prediction of the Magic Formula model can be very close to the test data at all stages of the optimization process.

The design of suspension affects the vehicle dynamics such as ride comfort and handling stability. Nonlinear characteristics and friction are important characteristics of suspension system, and the influence on vehicle dynamic performance cannot be ignored. Based on the seven-degree-of-freedom vehicle vibration nonlinear model with friction, the vibration response process of the vehicle and the influence of suspension friction on vehicle ride comfort and suspension action process were studied. The results show that friction will significantly affects the simulation of ride comfort and coincide with the function of the shock absorber. The suspension shock absorbers of vehicles were optimized with and without suspension friction. The results showed that the suspension tended to choose softer shock absorbers when there was friction. However, both of the two optimizations are able to improve the ride comfort of vehicles, and the simulation results were similar.

Elastomeric bushings are widely used in the passenger cars to make the cars have an ideal vehicle Noise, Vibration and Harshness (NVH) performance. However, elastomeric bushings also influence on the vehicle handling, ride and the durability performance of each component in the vehicle suspension system. It is relatively easy and cost effective to change the compliance of the bushing components compared with other method because they are made of elastomeric materials. The design of an elastomeric bushing is really a big challenge. One of the main difficulties comes from the different target compliance is wanted according to the handling, ride and durability demand at each different orientation (indicated by X Y Z) of the bushing. In this paper the following procedure was used for optimization of suspension elastomeric bushing compliance. Firstly, a detailed multi-body model was built including the nonlinear bushing effects and lower control arm flexibility.

Faced with the need to reduce development time and cost, the hardware-in-the-loop simulation increasingly proves to be an efficient tool in the development of automotive engine control system. In this article, the rapid prototyping technology is used to develop a hardware-in-the-loop simulation system for the diesel engine electronic control unit development. The hardware-in-the-loop simulation presented in this paper is based on Linux RTAI system, an open source hard real-time extension of the Linux Operating System, at low costs and within industrial standards. It exploits standard x86-based computing platforms provided with real-time Linux software in combination with generic computer-aided design software (Matlab/Simulink). One of its main characteristics is that it can automatically generate the real-time simulation code for many target processors, which runs under Linux RTAI operating system.

Problems such as higher heat load in the diesel engine and the occurrence of crazes within the valve bridge of heavy-duty vehicle diesel engine should be solved, with the increase of the power density of heavy-duty vehicle diesel engine. In this paper, the heat load experiment of complete machine, temperature-measuring of bottom part of cylinder head and the three-dimension numerical simulation on coolant flow and heat transfer in the water jacket have been performed. The result shows that the main reasons of higher heat load of the engine are insufficiency of heat-sinking capability of the water-radiator and shortage of coolant flux; and the unsuitable flow field in water jacket in cylinder head, where only a little of the coolant can cool the bottom of cylinder head, is the main cause of cylinder head bottom over-heated and thermal crack in the valve-bridge region.

The result of rib stiffening is the redistribution of natural frequencies and mode shapes of the plate, which can significantly alter its noise and vibration character. In this paper, genetic algorithms are used as a promising tool for sound radiation minimization problems. The objective of the study is to determine effective, general design methods for determining the optimal dimensions of the stamped rib in a plate to minimize the total radiated acoustic power. Acoustic response under broad-band excitation is considered. Radiated sound power is calculated using a boundary element method, in conjunction with a finite element solver for the solution of the structural problem.