Search Results

Tables, references and test reports

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.

This SAE Standard applies to all forestry machines exposed to the hazard of objects penetrating the front of the operator station (other than the roof). This would include:

This SAE Aerospace Information Report (AIR) covers forced air technology including: reference material, equipment, safety, operation, and methodology. This resource document is intended to provide information and minimum safety guidelines regarding use of forced air or forced air/fluid equipment to remove frozen contaminants. During the effective period of this document, relevant sections herein should be considered and included in all/any relevant SAE documents.

This SAE aerospace recommended practice (ARP) covers the requirements for external ground power equipment supplying 115/200 V, three-phase, 400 HZ output power measured at the aircraft receptacle. All forms of 400 Hz ground power including mobile and fixed systems are addressed by this document.

Scope is unavailable.

This test method specifies the operating procedures for a controlled-irradiance, xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test duration, as well as any exceptions to the specimen preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. Any deviation to this test method, such as the use of optical filter combinations, is to be agreed upon by contractual parties.

This document provides information and guidance material to assist in assessing the need for and feasibility of developing deicing facilities, the planning (size and location) and design of deicing facilities, and assessing environmental considerations and operational considerations associated with de-icing facilities. The document presents relevant information necessary to define the need for a deicing facility and factors influencing its size, location, and operation. The determination of the need for deicing facilities rests with Airports. Although this document intends to provide information to airport operator and deicing facility planner/designer, all stakeholders, including deicing service providers, should be involved in the development process.

1.1 This document recommends criteria for electronic convective weather displays and indicators on the flight deck during the cruise, climb and descent phases of the flights. Windshear and microburst detection is addressed in ARP 4102/11D. 1.2 This ARP includes onboard weather radar, as well as other methods of identifying convective weather. It is recognized that radar is the primary means used today, but these criteria can be applied to any future technology that might be developed.

This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) metric sockets, universal metric sockets, metric box wrenches and metric torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12 point fasteners conforming to the requirement of ISO 4095, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. This standard provides additional requirements beyond ASME B107.100 and B107.5M appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.

in this AIR should be considered, as opposed to long-life operation and environmental requirements of a manned aircraft, engine-driven pump. Appendix A is intended to indicate typical environments for several different types of missiles. The actual requirements for a given system should be used and specified in the detailed specification.Missile pumps are categorized by a moderate testing life and a relatively short operational service life. Generally, the pumps are operated at higher speeds, temperatures, and pressures than those used in manned aircraft systems, yet reliability must be extremely high, since there rarely is a redundant system aboard the missile. Due to the short but critical life and performance requirements, development, reliability and acceptance testing should be focussed on eliminating infant mortality failures. Missile pumps must be compatible with very severe environmental conditions during the service life.

This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical and head tracker performance of airborne Head Worn Displays (HWDs). This document covers methods for conformal HWD systems that are intended for use in the flight deck by the pilot or copilot. The focus of this document is for displays that generate HWD equivalent information. These measurement methods are provided for testing to the requirements of AS7377.

• AIRBAG COMPONENT MINIMUM PERFORMANCE REQUIREMENTS • AIRBAG INSTALLATION PERFORMANCE REQUIREMENT Current revision will only contain Part 25 and lapbelt installed airbags. Future revisions will expand to include Structural airbags, 3-point restraint airbag, pre-tensioner etc.

This SAE Aerospace Standard (AS) covers 6-point and 12-point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box end and flare nut wrenches, combination open end and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: (a) non-distorting usage; (b) possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514 and ISO 8434-2; and (c) transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.

This SAE Aerospace Recommended Practice covers the recommended requirements for the lighting and characteristics of instruments; information plates and displays, emergency, cautionary, advisory and status displays; circuit breaker and toggle switch positions; and the recommended requirements for the utility lighting system.

This document is a tool for the certifying authority, cockpit designers, instrument suppliers, lighting suppliers, and component suppliers. It is an aid to understanding and meeting relavant regulatory requirements, particularly those relating to pilot compartment view {CFR 25.773(a)(2)} and instrument lights {25.1381(a)(2)} for glare arising from visible eletromagnetic radiation.

This SAE Information Report describes the testing and reporting procedures that may be used to evaluate and document the excursion of a worker or civilian when transported in a seated and restrained position in the patient compartment of a ground ambulance when exposed to a front, side, or rear impact. Its purpose is to provide seating and occupant restraint manufacturers, ambulance builders, and end-users with testing procedures and documentation methods needed to identify head travel paths in crash loading events. This is a component level test. The seating system is tested in free space to measure maximum head travel paths. The purpose is not to identify stay out zones. Rather, the goal is to provide ambulance manufacturers with the data needed to design safer and functionally sound workstations for Emergency Medical Service workers so that workers are better able to safely perform patient care tasks in a moving ambulance.