Search Results

A major trend in current automotive research is hybridization of the power supply. This combination of electrical machine and combustion engine results, in some hybridization topologies, in a total decoupling of the combustion engine from the transmission. When the engine is decoupled from the transmission a new degree of freedom arises in engine design. The piston movement does not have to follow an evenly rotating shaft any more. It can be altered by the generator to achieve a movement found to be better from the point of efficiency or environmental concerns. Modelling work showed a potential of lowered NO emissions if the expansion could be delayed. The experimental study, conducted in a two piston Alvar engine, showed that the state of the art electrical machine (EM) propelling one of the crankshafts was too weak to change the crankshaft speed in an extent to give the fast volume changes required to change the emissions of the internal combustion engine (ICE).

For the simultaneous evaluation of the influence on engine knock of both chemical conditions and global operating parameters, a combined tool was developed. Thus, a two-zone kinetic model for SI engine combustion calculation (Ignition) was implemented into an engine cycle simulation commercial code. The combined model predictions are compared with experimental data from a single-cylinder test engine. This shows that the model can accurately predict the knock onset and in-cylinder pressure and temperature for different lambda conditions, with and without EGR. The influence of nitric oxide amount from residual gas in relation with knock is further investigated. The created numerical tool represents a useful support for experimental measurements, reducing the number of tests required to assess the proper engine control strategies.

Full cycle simulations of a spark ignition engine running on a primary reference fuel have been performed using a two-zone model. A detailed kinetic mechanism is taken into account in each of the zones, while the propagating flame front is calculated from a Wiebe function. The initial conditions for the unburned gas zone were calculated as a mixture of fresh gas and rest gas. The composition of the burned gas zone at the end of the last engine cycle, including nitric oxide emissions, was taken as rest gas. The simulations confirm that the occurrence of autoignition in the end gas is sensitive on the amount of nitric oxide in the rest gas of the spark ignition engine. The comparison of autoignition timings calculated for a single cylinder test engine are getting more accurate if the nitric oxide in the initial gases is taken into account.