Search Results

Standard

Standard for 12 Volt Cigarette Lighters, Power Outlets, and Accessory Plugs

2009-02-05

CURRENT

J563_200902

This standard is intended to cover cigar or cigarette lighters as well as power outlets based on the form and dimensions of the cigar lighter, and accessory plugs for use in these devices. Components covered herein are designed to work in nominal 12 VDC systems. This standard is a full performance specification. It includes dimensional and operational parameters as well as performance characteristics which must be met when submitting a cigar lighter assembly, power outlet assembly, or plug for production approval. This standard constitutes an acceptance specification for these devices. This standard covers the operational, reliability, durability, acceptance, and testing requirements for a cigar lighter (also referred to as just “lighter”) for installation in the passenger compartment of production vehicles.

Standard

Blade Fuses - 42 V System

2002-04-24

CURRENT

J2576_200204

This SAE Recommended Practice defines the blade fuse styles, test conditions, procedures, and performance requirements for use in vehicle electrical power systems designed to the new motor vehicle industry 42 V architecture. The intent of this document is to provide a framework for 58 V Blade Fuse characteristics, serving the motor vehicle industry to establish standardization with respect to electrical performance and mechanical requirements. This standardization shall lend itself to safe application practices; e.g., prevention of 32 V devices utilized inappropriately in 42 V electrical systems. Both the performance and mechanical requirements expressed herein are for the advancement of mobility engineering and the development of safe application practices. They are not intended for the establishment of design exclusions, patent rights, or franchising that engenders restraint of trade.

Standard

Plug-In Relay Test Methods

2000-09-07

CURRENT

J2544_200009

This SAE Standard covers standard test methods for environmental, mechanical, and electrical testing of plug-in relays used in surface vehicle electrical systems.

Standard

Warning Lamp Alternating Flashers

1999-07-15

CURRENT

J1054_199907

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V warning lamp alternating flashers.

Standard

Vehicular Hazard Warning Flashers

1999-07-15

CURRENT

J945_199907

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V hazard warning flashers. Document cancelled 1999. Information now contained in J1690

Standard

Combination Turn Signal Hazard Warning Signal Flashers

1999-07-15

CURRENT

J2068_199907

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.

Standard

Turn Signal Flashers

1999-07-15

CURRENT

J590_199907

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal flashers. Document cancelled in 1999. Information now contained in J1690

Standard

Mercury Switch Removal Process

1998-05-01

CURRENT

J2456_199805

Mercury capsules have been used in the automotive industry in various switching applications. The basic design and performance characteristics of mercury switches (or capsules) make these components particularly suited to underhood light and trunk light applications. The processes described in this SAE Standard deal with the location, removal, storage, and recycling of mercury switches and capsules associated with these underhood and trunk light applications.

Standard

FLASHERS

1996-08-01

CURRENT

J1690_199608

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal, hazard warning, warning lamp alternating, and combination flashers.

Standard

COMBINATION TURN SIGNAL HAZARD WARNING SIGNAL FLASHERS

1994-12-01

HISTORICAL

J2068_199412

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.

Standard

WARNING LAMP ALTERNATING FLASHERS

1994-09-01

HISTORICAL

J1054_199409

This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6,12, and 24 V warning lamp alternating flashers.

Standard

VEHICULAR HAZARD WARNING FLASHERS

1993-06-01

HISTORICAL

J945_199306

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V hazard warning flashers.

Standard

TURN SIGNAL FLASHERS

1993-04-01

HISTORICAL

J590_199304

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal flashers.

Standard

DOOR COURTESY SWITCH

1991-12-01

CURRENT

J2108_199112

This SAE Recommended Practice defines the test conditions, procedures, and performance requirements for 6, 12, and 24 V Door Courtesy Switches which are intended for use in motor vehicles.

Standard

DOOR COURTESY SWITCH

1991-06-01

HISTORICAL

J2108_199106

This SAE Recommended Practice defines the test conditions, procedures, and performance requirements for 6, 12, and 24 V Door Courtesy Switches which are intended for use in motor vehicles.

Standard

HIGH CURRENT TIME LAG ELECTRIC FUSES

1990-11-01

CURRENT

J1888_199011

The fuses shown in Figure 1 are for use in motor vehicles, boats, and trailers to protect electrical wiring. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.

Standard

MINIATURE BLADE TYPE ELECTRICAL FUSES

1990-11-01

CURRENT

J2077_199011

The fuses shown in Figure 1 are for use in motor vehicles, boats, and trailers to protect electrical wiring and equipment. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.

Standard

BACKUP LAMP SWITCH

1990-03-16

CURRENT

J1076_199003

This standard defines the test conditions, procedures and performance specification for 6, 12, and 24 V backup lamp switches which are intended for use in motor vehicles.

Standard

HEADLAMP BEAM SWITCHING

1990-03-16

CURRENT

J564_199003

This SAE Standard defines the test conditions, procedures and performance specification for 6, 12, and 24 V manually actuated headlamp beam control switches.

Standard

COMBINATION TURN SIGNAL HAZARD WARNING SIGNAL FLASHERS

1990-01-01

HISTORICAL

J2068_199001

This document defines the test conditions, procedures, and minimum design requirements, for nominal 6, 12, and 24 V flashers used for both turn signal and hazard warning signaling.