Refine Your Search

Date

Date

Topic

Topic

Safety testing and procedures Standard Tools and equipment Commercial Vehicle Cleaning

Search Results

Viewing 1 to 20 of 162
123Next >Last >>
Sort by published
Standard

Wheels - Lateral Impact Test Procedure - Road Vehicles
2023-12-13
CURRENT
J175_202312
The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.
Standard

Guidelines for Liquid Level Indicators
2023-10-06
CURRENT
J48_202310
This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.
Best Practice

AVSC Best Practice for Developing ADS Safety Performance Thresholds Based on Human Driving Behavior
2023-08-29
CURRENT
AVSC00012202308
Automated driving system (ADS) developers need a way to describe safe and competent driving for automated driving system-dedicated vehicles (ADS-DVs) in a way that is relatable to how stakeholders interpret safe driving today. Metrics informed by competent and safe human behavior could improve understanding and confidence in ADS-DVs. One way to make ADS safety performance relatable to stakeholders is to adopt an intuitive comparison to behaviors displayed on the road by human drivers. This best practice outlines an approach which involves comparing the on-road driving behavior of ADSs to that of human drivers, aiming to gain a deeper understanding of ADS behavior and its implications. It includes and assessment that centers on the predictability and similarity of ADS behavior relative to observed human driving behavior. By adopting this approach, a more comprehensive evaluation of the performance of ADS fleets can be achieved.
Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening
2023-06-27
CURRENT
J444_202306
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Best Practice

AVSC Information Report for Change Risk Management
2023-04-12
CURRENT
AVSC00010202304
AVSC Information Report for Change Risk Management AVSC00010202304 provides a process for change risk management for fleet-operated ADS-DVs using level 4 or 5 automation. The document addresses risks resulting from planned and unplanned changes in an ADS-DV design and/or operation. This information report is based on the concept of risk-informed decision-making. Making risk management decisions such as safety and change management, safety analysis, and safety assurance are especially applicable when moving from concept to production intent for the ADS-DV. Change Risk Management (CRM) does not replace best practices or other methods for managing safety anomalies or change management processes. It may instead be viewed as an additional resource that elaborates on how safety anomaly management and change management can be performed.
Standard

Ambulance Modular Body Evaluation - Quasi-Static Loading for Type I and Type III Modular Ambulance Bodies
2023-02-06
CURRENT
J3057_202302
This SAE Recommended Practice describes the test procedures for conducting quasi-static modular body strength tests for ambulance applications. Its purpose is to establish recommended test practices which standardize the procedure for Type I and Type III bodies, provide ambulance builders and end-users with testing procedures and, where appropriate, provide acceptance criteria that, to a great extent, ensures the ambulance structure meets the same performance criteria across the industry. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Motorcycle Turn Signal Lamps
2022-06-27
WIP
J131
This SAE Standard provides test procedures, requirements, and guidelines for motorcycle turn signal lamps. It does not apply to mopeds.
Standard

Occupant Restraint and Equipment Mounting Integrity - Rear Impact Ambulance Patient Compartment
2022-06-21
CURRENT
J3044_202206
This SAE Recommended Practice describes the test procedures for conducting rear impact occupant restraint and equipment mounting integrity tests for ambulance patient compartment applications. Its purpose is to describe crash pulse characteristics and establish recommended test procedures that will standardize restraint system and equipment mount testing for ambulances. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Ambulance Interior Storage Compartment Integrity
2022-06-21
CURRENT
J3058_202206
This SAE Recommended Practice describes the dynamic testing procedures required to evaluate the integrity of patient compartment interior Storage Compartments such as cabinets, drawers, or refillable supply pouch systems when exposed to a frontal, side or rear impact (i.e., a crash impact). Its purpose is to provide component manufacturers, ambulance builders, and end-users with testing procedures and, where appropriate, acceptance criteria that, to a great extent, ensure interior Storage Compartments or systems meet the same performance criteria across the industry. Descriptions of the test set-up, test instrumentation, photographic/video coverage, test fixture, and performance metrics are included.
Standard

Ambulance Litter Integrity, Retention, and Patient Restraint
2022-06-21
CURRENT
J3027_202206
This SAE Recommended Practice describes the testing procedures required to evaluate the integrity of a ground ambulance-based patient litter, litter retention system, and patient restraint when exposed to a frontal, side or rear impact. Its purpose is to provide litter manufacturers, ambulance builders, and end-users with testing procedures and, where appropriate, acceptance criteria that, to a great extent ensures the patient litter, litter retention system, and patient restraint utilizes a similar dynamic performance test methodology to that which is applied to other vehicle seating and occupant restraint systems. Descriptions of the test set-up, test instrumentation, photographic/video coverage, test fixture, and performance metrics are included.
Standard

Occupant Restraint and Equipment Mounting Integrity – Side Impact Ambulance Patient Compartment
2022-06-20
CURRENT
J2956_202206
This SAE Recommended Practice describes the test procedures for conducting side impact occupant restraint and equipment mounting integrity tests for ambulance patient compartment applications. Its purpose is to describe crash pulse characteristics and establish recommended test procedures that will standardize restraint system and equipment mounting testing for ambulances. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Occupant Restraint and Equipment Mounting Integrity – Frontal Impact Ambulance Patient Compartment
2022-06-20
CURRENT
J2917_202206
This SAE Recommended Practice describes the test procedures for conducting frontal impact occupant restraint and equipment mounting integrity tests for ambulance patient compartment applications. Its purpose is to describe crash pulse characteristics and establish recommended test procedures that will standardize restraint system and equipment mounting testing for ambulances. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Motorcycle Turn Signal Lamps
2022-05-24
CURRENT
J131_202205
This SAE Standard provides test procedures, requirements, and guidelines for motorcycle turn signal lamps. It does not apply to mopeds.
Best Practice

AVSC Best Practice for Evaluation of Behavioral Competencies for Automated Driving System Dedicated Vehicles (ADS-DVs)
2021-11-18
CURRENT
AVSC00008202111
Driving safely is a complex task. It involves a broad range of skills invoked in a vast number of potential scenarios. Assessing a set of behavioral competencies offers a valuable directional indication of automated driving system-dedicated vehicle (ADS-DV) safety performance. Behavioral competencies provide a starting point for additional assessment and contribute to a manufacturer’s case for safety. This best practice provides an approach to specify testable ADS behavior by: Clarifying a lexicon surrounding ADS behaviors Enumerating an elemental set of behaviors Demonstrating how to derive metrics to evaluate behavioral competence To evaluate as many dynamic driving task (DDT) subtasks as possible, ADS developers decompose the DDT into a generalized set of behaviors. Subsequently, developers use system engineering techniques to ensure that this decomposition maps to an elemental set of behavioral competencies.
Standard

Steering Control Systems - Heavy Trucks
2021-11-09
CURRENT
J2425_202111
This SAE Recommended Practice describes a laboratory test procedure and requirements for evaluating the characteristics of heavy-truck steering control systems under simulated driver impact conditions, as well as driver entry/egress conditions. The test procedure employs a torso-shaped body block that is impacted against the steering wheel.
123Next >Last >>
X