Search Results

This SAE Standard applies to all forestry machines exposed to the hazard of objects penetrating the front of the operator station (other than the roof). This would include:

SAE J115 specifies the relevant ISO standards for application to safety labels for use on off-road work machines as defined in SAE J1116.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.

Automated driving system-dedicated vehicles (ADS-DVs) can handle a wide variety of circumstances they might encounter on the road. When circumstances are encountered that exceed ADS design capabilities, the ADS is designed to bring the vehicle into a minimal risk condition (MRC). When an ADS-DV encounters these conditions—identified as “triggers” within this best practice—they can request remote assistance (RA) from a remotely located human operator. RA involves the provision of guidance, suggestions, or recommendations to a vehicle from a remote location, without direct control of the vehicle. RA has emerged as a useful tool in supporting the operation of an ADS. It can complement the capabilities of ADS-DVs and improve overall system performance and utilization, particularly in situations that exceed ADS design capabilities. This best practice provides guidelines for integrating remote assistance within the context of ADS.

This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.

Automated driving system (ADS) developers need a way to describe safe and competent driving for automated driving system-dedicated vehicles (ADS-DVs) in a way that is relatable to how stakeholders interpret safe driving today. Metrics informed by competent and safe human behavior could improve understanding and confidence in ADS-DVs. One way to make ADS safety performance relatable to stakeholders is to adopt an intuitive comparison to behaviors displayed on the road by human drivers. This best practice outlines an approach which involves comparing the on-road driving behavior of ADSs to that of human drivers, aiming to gain a deeper understanding of ADS behavior and its implications. It includes and assessment that centers on the predictability and similarity of ADS behavior relative to observed human driving behavior. By adopting this approach, a more comprehensive evaluation of the performance of ADS fleets can be achieved.

Successful scaling of automated driving system (ADS) technology and realization of its full potential will require developers and service providers to continuously monitor performance of their fleet and enact prompt improvements should issues arise. ADS developers and manufacturers can use the data collected from vehicles in active deployments (e.g., safety performance data) to proactively confirm initial risk assumptions and feed other safety management processes. This best practice provides an approach to continuous monitoring and potential improvement of safety performance of ADS-DVs after deployment. It also outlines approaches to analyzing data related to known and unknown variations in the ADS-DV’s operating environment and complements other AVSC best practices that provide metrics and methods which can be used to monitor safety [AVSC00006202103, AVSC00008202111] while considering important factors pertaining to how data is collected, analyzed, and used [AVSC00004202009].

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated backup alarm devices primarily intended for use on off-road, self-propelled work machines as defined by SAE J1116 (limited to categories of (1) construction, and (2) general purpose industrial).

The purpose of this SAE Recommended Practice is to verify that vehicles and/or components are capable of communicating a required set of information, which is described by the diagnostic messages specified in SAE J1939-73, that is in accordance with off-board diagnostic tool interface requirements contained in the government regulations cited below. This document describes the tests, methods, and results for verifying diagnostic communications from an off-board diagnostic tool (i.e., scan tool) to a vehicle and/or component. SAE members have generated this document to serve as a guide for testing vehicles for compliance with ARB and other requirements for emissions-related on-board diagnostic (OBD) functions for heavy-duty engines used in medium- and heavy-duty vehicles. The development of HD OBD regulations by U.S.

This document establishes recommended practices to validate acceptable corrosion performance of metallic components and assemblies used in medium truck, heavy truck, and bus and trailer applications. The focus of the document is methods of accelerated testing and evaluation of results. A variety of test procedures are provided that are appropriate for testing components at various locations on the vehicle. The procedures incorporate cyclic conditions including corrosive chemicals, drying, humidity, and abrasive exposure. These procedures are intended to be effective in evaluating a variety of corrosion mechanisms as listed in Table 1. Test duration may be adjusted to achieve any desired level of exposure. Aggravating conditions such as joint rotation, mechanical stress, and temperature extremes are also considered. This document does not address the chemistry of corrosion or methods of corrosion prevention. For information in these areas, refer to SAE J447 or similar standard.

This SAE Standard establishes the maximum gradient rating during hopper discharge of self-propelled, driver-operated sweepers and scrubbers as defined by SAE J2130-1 and SAE J2130-2.

This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along battery feed or switched ignition inputs. Test apparatus specifications outlined in this procedure were developed for components installed in vehicles with 12-V systems (passenger cars and light trucks, 12-V heavy-duty trucks, and vehicles with 24-V systems). Presently, it is not intended for use on other input/output (I/O) lines of the device under test (DUT).

This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along battery feed or switched ignition inputs. Test apparatus specifications outlined in this procedure were developed for components installed in vehicles with 12-V systems (passenger cars and light trucks, 12-V heavy-duty trucks, and vehicles with 24-V systems). Presently, it is not intended for use on other input/output (I/O) lines of the device under test (DUT).

This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L, although fast fill fueling can be used on machines with smaller fuel capacity.

This SAE Recommended Practice applies to off-road, self-propelled work machine categories of earthmoving, forestry, road building and maintenance, and specialized mining machinery as defined in SAE J1116.,

This SAE Standard applies to self-propelled off-road work machines. Included are the following categories: Earthmoving Implements and Attachments Forestry Road Building and Maintenance Specialized Mining Powered Industrial Trucks This SAE Standard does not apply to Agricultural Tractors as defined in ANSI/ASAE S390 although some SAE standards are also applicable to Agricultural Tractors. NOTE: Most standards relating to agricultural tractors and implements are developed by ASABE.

SAE J2461 specifies the recommended practices of a Vehicle Electronics Programming Stations (VEPS) architecture.in a Win32® environment. This system specification, SAE J2461, was a revision of the requirements for Vehicle Electronics Programming Stations (VEPS) set forth in SAE J2214, Vehicle Electronics Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants (Cancelled Jun 2004). The J2214 standard has been cancelled indicating that it is no longer needed or relevant.

This document applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if the load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. This recommended practice applies to all mechanical, hydraulic, and electric powered hoist mechanisms.

This specification sheet establishes requirements for a high collapse pressure configuration filter element of a specific configuration with a minimum filtration ratio of 75 for particles larger than 7 µm when designed and tested in accordance with SAE J2321 and this specification sheet.