Search Results

Standard

Vibration Test Machine and Operation Procedure

2023-04-04

CURRENT

J577_202304

This SAE Recommended Practice provides procedures and information to conduct vibration (impact) tests on lighting devices and their components as well as other safety equipment used on vehicles.

Standard

Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis

2023-02-06

WIP

J2999

This SAE Standard provides a method for determining the Effective Projected Luminous Lens Area (EPLLA) of a lamp function using design analysis. This standard was created to clarify and address how to determine EPLLA with traditional and new technologies.

Standard

FMVSS 108 Adaptive Driving Beam test parameter clarification

2022-10-14

WIP

J3288

Provide industry consensus for various aspects of the FMVSS 108 Adaptive Driving Beam requirements where further clarification is required to promote repeatability and reproducibility of the testing.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2021-12-01

WIP

J575

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2021-04-09

CURRENT

J575_202104

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2018-08-28

HISTORICAL

J575_201808

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Highly Accelerated Failure Test (HAFT) for Automotive Lamps with LED Assembly

2018-05-20

CURRENT

J3014_201805

This SAE Recommended Practice provides test procedures, requirements, and equipment recommendations for the methods of the measurement that characterizes potential design failures by utilizing a step stress approach to subject a device under test to thermal, vibration, and electrical stresses of types and levels beyond what it may see in actual use, but which will rapidly induce failure modes, allowing them to be detected and corrected.

Standard

Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment

2017-08-22

WIP

J2357

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, design requirements and design guidelines for electronic devices.

Standard

Photometry Laboratory Accuracy Guidelines

2017-04-24

WIP

J1330

The purpose of this SAE Information Report is to list and explain major equipment, instrumentation, and procedure variables which can affect inter-laboratory differences and repeatability of photometric measurements of various lighting devices listed in SAE Technical Reports. The accuracy guidelines listed in the report are for the purpose of controlling variables that are not a direct function of the lighting device being measured. The control of these individual variables is necessary to control the overall accuracy of photometric measurements. These accuracy guidelines apply to the measurement of the luminous intensities and reflected intensities of devices at the specified geometrically distributed test points and areas. These guidelines do not apply to photometric equipment used to measure license plate lamps.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2015-08-27

HISTORICAL

J575_201508

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Camera-based Light Measurement Techniques

2014-06-26

WIP

J3100

This recommended practice describes the application of digital cameras to measurement of photometric quantities in the photometric laboratory.

Standard

Highly Accelerated Failure Test (HAFT) for Automotive Lamps with LED Assembly

2013-03-26

HISTORICAL

J3014_201303

This SAE Recommended Practice provides test procedures, requirements, and equipment recommendations for the methods of the measurement that characterizes potential design failures by utilizing a step stress approach to subject a device under test to thermal, vibration, and electrical stresses of types and levels beyond what it may see in actual use, but which will rapidly induce failure modes, allowing them to be detected and corrected.

Standard

Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment

2012-11-01

CURRENT

J2357_201211

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, design requirements and design guidelines for electronic devices.

Standard

SAE Miniature Bulb Vibration Test

2012-06-11

CURRENT

J1765_201206

This SAE Recommended Practice was designed to be an accelerated vibration test that subjects bulbs to critical vibration/shock loading typically observed in normal vehicle service and can be employed for conformance of production (COP) testing. The test was designed for external vehicle applications.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2012-04-11

HISTORICAL

J575_201204

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width

2010-04-21

HISTORICAL

J575_201004

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports.

Standard

Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width

2007-06-29

HISTORICAL

J575_200706

This SAE Recommended Practice provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Recommended Practices and Standards and is intended for reference for devices used on vehicles less than 2032 mm in width, regardless of length, or 7620 mm in length regardless of width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139.

Standard

Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width

2006-11-21

HISTORICAL

J575_200611

This SAE Recommended Practice provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Recommended Practices and Standards and is intended for reference for devices used on vehicles less than 2032 mm in width, regardless of length, or 7620 mm in length regardless of width. Tests for vehicles larger than 2032 mm in overall width are covered in J2139.

Standard

Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width

2006-04-06

HISTORICAL

J575_200604

This SAE Recommended Practice provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Recommended Practices and Standards and is intended for reference for devices used on vehicles less than 2032 mm in width, regardless of length, or 7620 mm in length regardless of width. Tests for vehicles larger than 2032 mm in overall width are covered in J2139.

Standard

Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width

2004-10-29

HISTORICAL

J575_200410

This SAE Recommended Practice provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Recommended Practices and Standards and is intended for reference for devices used on vehicles less than 2032 mm in width, regardless of length, or 7620 mm in length regardless of width. Tests for vehicles larger than 2032 mm in overall width are covered in J2139.