Search Results

To study the generated axial force (GAF) of the drive shaft system more accurately and effectively, this paper introduces the interval uncertainty into the research focusing on the GAF. Firstly, an interval uncertainty model for calculating the GAF is proposed based on the Chebyshev polynomials and an analytical model of the GAF. The input torque, the articulation angle, the rotation angle of the drive shaft system, the pitch circle radius (PCR) of the tripod joint and the friction coefficient are regarded as interval variables. Secondly, the upper and lower bounds of the proposed GAF model under interval uncertainty parameters are calculated quickly with the vertex method. Then the interval uncertainty optimization of the GAF under uncertainty parameters is performed. The upper bound of the response interval of the GAF is taken as the optimization object.

In this paper, a gain-scheduling optimal control approach is proposed to enhance yaw stability of articulated commercial vehicles through active braking of the proper wheel(s). For this purpose, an optimal feedback control is used to design a family of yaw moment controllers considering a broad range of vehicle velocities. The yaw moment controller is designed such that the instantaneous tractor yaw rate and articulation angle responses are forced to track the target values at each specific vehicle velocity. A gain scheduling mechanism is subsequently constructed via interpolations among the controllers. Furthermore, yaw moments derived from the proposed controller are realized by braking torque distribution among the appropriate wheels. The effectiveness of the proposed yaw stability control scheme is evaluated through software-in-the-loop (SIL) co-simulations involving Matlab/Simulink and TruckSim under lane change maneuvers.

Vehicle jackknifing is generally associated with the loss of yaw stability, and is one of the most common cause of serious traffic accidents involving tractor-semitrailer combinations. In this paper, an active braking control strategy is proposed for jackknifing prevention of a tractor-semitrailer combination on a low friction road. The proposed control strategy is realized via upper-level and lower-level control structures considering braking of both the units. In the upper-level control, the required corrective yaw moments for tractor and semitrailer are generated using a PID controller aiming to reduce errors between the actual yaw rates of tractor-semitrailer and the target yaw rates deduced from a reference model. The corrective yaw moments are achieved through brake torque distribution among the tractor and semitrailer axle wheels in the lower-level control.

A range of axle suspensions, comprising hydro-pneumatic struts and diverse linkage configurations, have evolved in recent years for large size mining trucks to achieve improved ride and higher operating speeds. This paper presents a comprehensive analysis of different independent front suspension linkages that have been implemented in various off-road vehicles, including a composite linkage (CL), a candle (CA), a trailing arm (TA), and a double Wishbone (DW) suspension applied to a 190 tons mining truck. Four different suspension linkages are modeled in MapleSim platform to evaluate their kinematic properties. The relative kinematic properties of the suspensions are evaluated in terms of variations in the kingpin inclination, caster, camber, toe-in and horizontal wheel center displacements considering the motion of a hydro-pneumatic strut. The results revealed the CL and DW suspensions yield superior kinematic response characteristics compared to the CA and TA suspensions.

The ride dynamics of typical North-American soil compactors were investigated via analytical and experimental methods. A 12-degrees-of-freedom in-plane ride dynamic model of a single-drum compactor was formulated through integrations of the models of various components such as driver seat, cabin, roller drum and drum isolators, chassis and the tires. The analytical model was formulated for the transit mode of operation at a constant forward speed on undeformable surfaces with the roller vibrator off. Field measurements were conducted to characterize the ride vibration environments during the transit mode of operation. The measured data revealed significant magnitudes of whole-body vibration of the operator-station along the vertical, lateral, pitch and roll-axes. The model results revealed reasonably good agreements with ranges of the measured vibration data.

The ride performance potentials of a prototype torsio-elastic axle suspension for an off-road vehicle were investigated analytically and experimentally. A forestry vehicle was fitted with the prototype suspension at its rear axle to assess its ride performance benefits. Field measurements of ride vibration along the vertical, lateral, fore-aft, roll and pitch axes were performed for the suspended and an unsuspended vehicle, while traversing a forestry terrain. The measured vibration responses of both vehicles were evaluated in terms of unweighted and frequency-weighted rms accelerations and the acceleration spectra, and compared to assess the potential performance benefits of the proposed suspension. The results revealed that the proposed suspension could yield significant reductions in the vibration magnitudes transmitted to the operator's station.

The larger chassis space requirements of hybrid vehicles necessitates considerations of the suspension synthesis with limited lateral space, which may involve complex compromises among performance measures related to vehicle ride and handling. This study investigates the influences of suspension linkage geometry on the kinematic and dynamic responses of the vehicle including the wheel load in order to facilitate synthesis of suspension with constrained lateral space. A kineto-dynamic half-car model is formulated incorporating double wishbone suspensions with tire compliance, although the results are limited to kinematic responses alone. An optimal synthesis of the suspension is presented to attain a compromise among the different kinematic performance measures with considerations of lateral space constraints. In the kineto-dynamic model, the struts comprising linear springs and viscous dampers are introduced as force elements.

Automotive suspensions invariably exhibit asymmetric damping properties in compression and rebound, which is partly attributed to asymmetric damping and in-part to the suspension linkage kinematics together with tire lateral compliance. Although automotive suspensions have invariably employed asymmetric damping, the design guidelines and particular rationale for such asymmetry has not been explicitly defined. The influences of damper asymmetry together with the suspension kinematics and tire lateral compliance on the dynamic responses of a vehicle are investigated analytically under bump and pothole excitations, and the results are interpreted in view of potential design guidance. A quarter-car kineto-dynamic model of the road vehicle employing a double wishbone type suspension comprising a strut with linear spring and multiphase asymmetric damper is formulated for the analyses.

An articulated vehicle suspension comprising a parallel combination of passive energy restoring and dissipative elements and a feedback controlled force generator is analyzed using H2 control synthesis. The active suspension schemes based on limited-state measurements are formulated to minimize a performance measure comprising ride quality, cargo safety, suspension and tire dynamic deflections, and power requirements. The ride quality and the dynamic wheel load performance characteristics of these suspension schemes are compared to those of a vehicle with an ideal active suspension and an “optimum” passive suspension to demonstrate the performance potentials of the proposed limited-measurement-based suspension schemes.

The influence of self- and forced-steering axles on the directional dynamics of a tractor-semitrailer is investigated through computer simulations. The dynamic characteristics of a self-steering axle are analytically modeled and integrated to a three-dimensionalnonlinear directional dynamic model of the vehicle. Two forced-sleering algorithms relating !he vehicle speed and response quantities to the angle of the wheels of the steerable axle are formulated. and integrated to the nonlinear directional dynamic model of the vehicle. Computer simulations are performed to determine the directionalresponse characteristics of a tractor-semitrailer with self- and forced-steering axles for low as well as high speed maneuvers. The directional response characteristics of the vehicles with self- and forced-steering axles are discussed in view of the self-steering parameters and forced-steering gains, and compared to those of the vehicle with conventional axles.