Search Results

A cargo box is a key structure in a pickup truck which is used to hold various items. Therefore, a cargo box must be durable and robust under different ballast conditions when subjected to road load inputs. This paper discusses a Design for Six Sigma (DFSS) approach to improve the durability of cargo box panel in its early development phase. Traditional methods and best practices resulted in multiple iterations without an obvious solution. Hence, DFSS tools were proposed to find a robust and optimum solution. Key control factors/design parameters were identified, and L18 Orthogonal Array was chosen to optimize design using CAE tools. The optimum design selected was the one with the minimum stress level and the least stress variation. This design was confirmed to have significant improvement and robustness compared to the initial design. DFSS identified load paths which helped teams finally come up with integrated shear plate to resolve the durability concern.

Structural durability of automotive components is one of the key requirements in design and development of today’s automobiles. Virtual simulations are used to estimate component durability to save the cost and time required to build the components and testing. The objective of this work is to find the service life of automotive HVAC pipe assembly by calculating cumulative fatigue life for operation under actual powertrain load conditions. Modal transient response analysis is performed with the measured powertrain load time history. Strain based fatigue life analysis is carried out using modal superposition method (MSM). The estimated fatigue life was compared with the physical test results. This paper also explains the root cause of low fatigue life on pipe assembly and provide the solution.

Nowadays development of automotive HVAC is a challenging task wherein thermal comfort and safety are very critical factors to be met. HVAC system is responsible for the demisting and defrosting of the vehicle’s windshield and for creating/maintaining a pleasing environment inside the cabin by controlling airflow, velocity, temperature and purity of air. Fog or ice which forms on the windshield is the main reason for invisibility and leads to major safety issues to the customers while driving. It has been shown that proper clear visibility for the windshield could be obtained with a better flow pattern and uniform flow distribution in the defrost mode of the HVAC system and defrost duct. Defroster performance has received significant attention from OEMs to meet the specific global performance standards of FMVSS103 and SAE J902. Therefore, defroster performance is seriously taken into consideration during the design of HVAC system and defroster duct.

Vehicle suspension parts are subjected to variable road loads, manufacturing process variation and high installation loads in assembly process. These parts must be robust to usage conditions to function properly in the field. Design for Six Sigma (DFSS) tools and Taguchi Method were used to optimize initial rear suspension trailing arm design. Project identified key control factor/design parameters, to improve part robustness at the lowest cost. Optimized design performs well under higher road loads and meets stringent durability requirements. This paper evokes use of Taguchi Method to design robust rear suspension trailing arm and study effect of selected design parameters on robustness, stress level/durability and part cost.

Strength and fatigue assessment of chassis components are essentially influenced by the material used and manufacturing processes chosen. The manufacturing process of chassis components decides the variation in the mechanical properties of the component, which has an impact on the strength/fatigue performance. Investigating the design concerning the manufacturing processes is vital to the industry. Standard computer aided engineering (CAE) procedures for validating the alloy wheels usually consider the material properties as homogeneous. There was a gap between test results and CAE durability prediction (as per standard procedure). Incorporating the manufacturing process related characteristics with the strength simulation will be a viable solution to reduce this gap. This study was intended at developing a procedure for the strength analysis of an alloy wheel by considering the manufacturing process.

In the vehicle development process, the door slam durability assessment is of significant importance in the estimation of fatigue life for body closure system. So far, various exertions have been taken into consideration to better represent the door slam simulation for door durability performance. Nowadays, with computer aided engineering (CAE) being extensively implemented, simulation procedures are constantly being investigated in order to get precise outcomes as physical testing. In a real world scenario, the customer closes the door frequently against the sealed cabin which offers the cabin pressure to close. The cabin pressure acts in the opposite direction of door closing providing the damping effect and minimizes the overall damage to the structure. Currently, simulations are focused on determining the total energy required for closing the door by summing up the energy lost in the weather seal and latch.

Structural durability of the vehicle components is one of the key factors in design and development. This helps in understanding the capability of structures or components to withstand the loads encountered in service over a specified period of use. Durability assessment for vehicle structures requires load inputs. These load inputs can be in form of force, acceleration and displacement and typically generated from road load profiles in the testing lab or by the load groups. But if a program is in its early stage when design data is immature or lab facility is limited then acquiring these load inputs takes time and sometimes not feasible also. In this scenario, we can predict the durability load inputs from road load profiles virtually using dynamic transient simulation. The objective of this work is to predict the durability input signals from road profiles using finite element model by modal transient approach.

Roof is one of the major subsystems of the Body-In-White Structure, which significantly affects the vehicle strength and durability performance criteria. The roof structure should meet the functional targets under the standard operating conditions. Roof design considering various parameters in the initial phase is beneficial in reducing the product timeline for the OEM. The first-time right approach provides an opportunity for Optimization and Cost benefits in the longer term. This paper provides the use of Design for Six Sigma techniques to arrive at a robust and optimum design for the standard roof structure. The roof structure is designed to meet the operating conditions for durability. Roof finite element models are developed with control factors that affect the structure design. Virtual Analysis is performed on the Standard roof structure models.

Vehicle suspension parts are subjected to variable road loads, manufacturing process variation and high installation loads in assembly process. Seam welding can be considered as such process to connect more components and parts. Typical in a Mc Pherson suspension system stabilizer bar link is connected to the strut assembly through ball stud and clamped to a bracket welded to the outer strut tube. Cracks have been observed in the stabilizer bar link bracket welds of vehicles in the field, effecting the functionality of the suspension system. During preliminary phase of product development CAE assessment of the seam weld is carried out against road load data, if the design does not meet the targets enabler studies are carried out in an iterative approach. Various design variables (control factors) can be considered to carry out the iterations.

Design for Six Sigma (DFSS) is an essential tool and methodology for innovation projects to improve the product design/process and performance. This paper aims to present an application of the DFSS Taguchi Method for an automotive/vehicle component. High-Pressure Vacuum Assist Die Casting (HPVADC) technology is used to make Cast Aluminum Front Shock Tower. During the vehicle life, Shock Tower transfers the road high impact loads from the shock absorber to the body structure. Proving Ground (PG) and washout loads are often used to assess part strength, durability life and robustness. The initial design was not meeting the strength requirement for abusive washout loads. The project identified eight parameters (control factors) to study and to optimize the initial design. Simulation results confirmed that all eight selected control factors affect the part design and could be used to improve the Shock Tower's strength and performance.

Strength, creep, and fatigue of the chassis components are greatly influenced by the material used and its manufacturing process. Alloy wheel is one of the critical chassis components manufactured using the casting process. Secondary Dendrite Arm Spacing (SDAS) is one of the important microstructural parameters generated during the solidification stage of the casting process. SDAS has a significant role in altering the mechanical properties and the behavior of the component. Variation in solidification time and alloy composition will have a major impact in SDAS. The combined effect of SDAS with microstructural variations and the strength behavior has not been studied in earlier literature for an alloy wheel. The scope of this study is to perform casting simulation for an alloy wheel, predict the SDAS and capture the variation of mechanical properties (yield strength, ultimate tensile strength & elongation).

Brake assemblies are an essential part of any vehicle, and their effective functioning is critical for the safety and comfort of passengers. The surface roughness of brake components plays a vital role in figuring out their tribological and NVH (Noise, Vibration, and Harshness) behavior. It is essential to understand the impact of surface roughness on brake performance to ensure efficient braking and it has been a topic of interest in the automotive industry. In this study, the influence of surface roughness on the wear, and noise characteristics of a brake assembly has been investigated. The study also provides insights into the relationship between surface roughness, frictional behavior, and NVH performance, which can be used to improve the design and manufacturing of brake assemblies. The brake assembly includes of a disc, caliper, and brake pads, which work together to convert the kinetic energy of the vehicle into heat energy, has been considered in this study.