Search Results

This paper describes a human factors simulation study of the decision making behavior of drivers attempting to avoid nonrecurring congestion by diverting to alternate routes with the aid of in-vehicle navigation systems. This study is the first phase of a two part project in which the second phase will apply the driver behavior data to a simulation model analysis of traffic flow. The object of the driver behavior experiment was to compare the effect of various experimental navigation systems on driver route diversion and alternate route selection. The experimental navigation system configurations included three map based systems with varying amounts of situation information and a non map based route guidance system. The overall study results indicated that navigation system characteristics can have a significant effect on driver diversion behavior, with better systems allowing more anticipation of traffic congestion.

Lateral/directional dynamics involve vehicle yawing, rolling and lateral translation motions and dynamic stability concerns directional behavior (i.e. spinout) and rollover. Previous research has considered field test and computer simulation methods and results concerning lateral/directional stability. This paper summarizes measurements and simulation analysis of a wide range of vehicles regarding directional and rollover stability. Directional stability is noted to be strongly influenced by lateral load transfer distribution (LTD) between the front and rear axles LTD influences tire side force saturation properties, and should be set up so that side forces at the rear axle do not saturate before the front axle under hard maneuvering conditions in order to avoid limit oversteer and spinout.

This paper describes a low cost, PC based driving simulation that includes a complete vehicle dynamics model (VDM), photo realistic visual display, torque feedback for steering feel and realistic sound generation. The VDM runs in real-time on Intel based PCs. The model, referred to as VDANL (Vehicle Dynamics Analysis, Non-Linear) has been developed and validated for a range of vehicles over the last decade and has been previously used for computer simulation analysis. The model's lateral and longitudinal dynamics have 17 degrees of freedom for a single unit vehicle and 33 degrees of freedom for an articulated vehicle. The model also includes a complete drive train including engine, transmission and front and rear drive differentials, and complete, power assisted braking and steering systems. A comprehensive tire model (STIREMOD) generates lateral and longitudinal forces and aligning torque based on normal load, camber angle and horizontal (lateral and longitudinal) slip.

This paper considers ground vehicle lateral/directional stability which is of primary concern in traffic safety. Lateral/directional dynamics involve yawing, rolling and lateral acceleration motions, and stability concerns include spinout and rollover. Lateral/directional dynamics are dominated by tire force response which depends on horizontal slip, camber angle and normal load. Vehicle limit maneuvering conditions can lead to tire force responses that result in vehicle spinout and rollover. This paper describes accident analysis, vehicle testing and computer simulation analysis designed to give insight into basic vehicle design variables that contribute to stability problems. Field test procedures and results for three vehicles are described. The field test results are used to validate a simulation model which is then analyzed under severe maneuvering conditions to shed light on dynamic stability issues.

Performance testing provides an important complement to urine testing as a determinant of fitness for duty. Performance testing can be conducted immediately to screen out impaired workers before they undertake safety related job functions. Urine testing involves the expense and delay of laboratory testing, and results relate more to life style than current on-the-job performance capability. This paper reviews performance based testing and discusses the development and application of two performance based screening devices. One device has the capability of rapidly screening for impaired psychomotor performance given previous baseline data. The second device provides the potential for screening psychomotor and divided attention performance without prior experience or baseline data.

In this paper a yaw stability control algorithm along with an emergency roll control strategy have been developed. The yaw stability controller and emergency roll controller were both developed using linear two degree-of-freedom vehicle models. The yaw stability controller is based on Lyapunov stability criteria and uses vehicle lateral acceleration and yaw rate measurements to calculate the corrective yaw moment required to stabilize the vehicle yaw motion. The corrective yaw moment is then applied by means of a differential braking strategy in which one wheel is selected to be braked with appropriate brake torque applied. The emergency roll control strategy is based on a rollover coefficient related to vehicle static stability factor. The emergency roll control strategy utilizes vehicle lateral acceleration measurements to calculate the roll coefficient. If the roll coefficient exceeds some predetermined threshold value the emergency roll control strategy will deploy.

A tire/terrain interaction model is presented to support the dynamic simulation of off-road ground vehicle. The model adopts a semi-empirical approach that is based on curve fits of soil data combined with soil mechanics theories to capture soil compaction, soil shear deformation, and soil passive failure that associate with off-road driving. The resulting model allows the computation of the tire forces caused by terrain deformation in longitudinal and lateral direction. This model has been compared with experimental data and shown reasonable prediction of the tire/terrain interaction.

Basic performance properties of tires significantly influence the lateral/directional (steering) stability and handling of highway vehicles. These properties include cornering stiffness and peak and slide coefficients of friction. This paper considers some detailed tire machine measurements of lateral tire performance. A large database of tire properties for a wide range of highway vehicles is also analyzed. A regression analysis approach is used to define the sensitivity of various size and operational (speed, pressure and load) characteristics on tire behavior. The paper discusses the manner in which these properties vary with tire size and operational conditions, and the effect of the properties on vehicle stability and handling.

This paper describes the driver/vehicle modeling aspects of a computer simulation that can respond to highway engineering descriptions of roadways. The driver model interacts with a complete vehicle dynamics model that has been described previously. The roadway path is described in terms of horizontal and vertical curvature and cross slopes of lanes, shoulders, side slopes and ditches. Terrain queries are made by the vehicle dynamics to locate tires on the roadway cross-section, and to define vehicle path and road curvature at some distance down the road. The driver model controls steering to maintain lateral lane position. Speed is maintained at a speed limit on tangents, and decreased as needed to maintain safe lateral acceleration. Because the bandwidth of longitudinal (speed) control is much lower than lateral/directional (steering) control, the driver model looks further ahead for speed control than for steering.

The U.S. Army Tank Automotive Research Development and Engineering Center (TARDEC) and the U.S. Army Corps of Engineers (USACE) are improving modeling and simulation technologies in order to predict the performance of Army ground platforms with a high degree of confidence. In order to provide a framework within which to evaluate the simulation technologies and provide a measure of the progress of the effort, a suite of virtual test operating procedures are being implemented. This framework is called the Virtual Evaluation Suite (VES). It is applicable to the study of ground vehicle stability, handling, ride, mobility, and durability over all terrains under all weather conditions. Although developed in order to evaluate simulation technologies, the VES may be considered a simulation that could be used to exercise any ground platform model that meets the VES standard vehicle interface.

A Vehicle Dynamics and Mobility Server (VDMS) is being developed by the U.S. Army to perform real-time high-fidelity simulation of robotic vehicle concepts. It allows a set of conceptual Unmanned Ground Vehicles (UGVs) to be selected and configured for the purposes of evaluating their mobility performance in a simulated battlefield scenario. VDMS includes real-time ground vehicle models operating over high-resolution digital terrain. The models consist of three-dimensional multi-body vehicle dynamics, off-road vehicle-soil interaction, collision detection and obstacle negotiation code, and autonomous control algorithms. A minimally completed VDMS was used in an RDEC Federation Calibration Experiment (CalEx) in October 2001 to predict the mobility of ten robotic scout vehicles. This paper presents the rationale, requirements, design, and implementation of VDMS. It also briefly discusses other possible applications of VDMS and the future direction of VDMS.

Vehicle handling and stability are significantly affected by inertial properties including moments of inertia and center of gravity location. This paper will present an analysis of the NHTSA Inertia Database and give regression equations that approximate moments of inertia and center of gravity height given basic vehicle properties including weight, width, length and height. The handling and stability consequences of the relationships of inertial properties with vehicle size will be analyzed in terms of previously published vehicle dynamics models, and through the use of a nonlinear maneuvering simulation.

This paper describes a laboratory simulation study of driver reaction to in-vehicle navigation systems. The study included a pre-test questionnaire on demographic background and commuting behavior, simulation testing of navigation decision making, and a post-test questionnaire on navigation behavior and reactions to in-vehicle navigation systems and the laboratory simulation. A total of 277 subjects, both male and female, were employed over a wide range of ages. Test subjects were assigned to one of four navigation system groups or a no-system control group for the purpose of comparing system performance. The simulation task required subjects to experience a commuting ‘drive’ on a Southern California freeway route and minimize trip time by diverting off the main route to avoid congestion. Subjects were given orientation and training on the simulation and their navigation system condition, and were motivated by rewards and penalties to minimize trip time.

Maneuverable round and ramair parachutes are flown by professional forestry firefighters, search and rescue personnel, and military combat teams when deployment by fixed or rotary aircraft is inappropriate. Parachute flight training requires the development of perceptual skills in canopy control, guidance, and energy management. These parachutists must learn to accurately sense motion visual cues, and predict and manage their trajectory. Parachute guidance and control can only be acquired through repeated practice. Canopy control training has been traditionally limited to a classroom lecture topic. There was no opportunity for the immediate student/instructor dialogue available during the extensive dual flight training used for conventional aircraft, where instruction can occur during the numerous practice landings available via rapid touch-and-go techniques.

This paper describes validation work carried out for two vehicle dynamics computer simulation programs. One program, referred to as VDANL (Vehicle Dynamics Analysis NonLinear), is intended to simulate passenger cars, vans and light trucks. The second program simulates All Terrain Vehicles (ATVs) and is referred to as NLATV (NonLinear ATV). The programs have been checked out and validated for a variety of maneuvering conditions and a broad range of vehicles. The programs run on IBM-PC/MS DOS compatible computers, and numerical methods have been used to give numerically stable solutions with reasonable computational speed over a broad range of maneuvering situations.

Motion cueing algorithms can improve the perceived realism of a driving simulator, however, data on the effects on driver performance and simulator sickness remain scarce. Two novel motion cueing algorithms varying in concept and complexity were developed for a limited maneuvering workspace, hexapod/Stuart type motion platform. The RideCue algorithm uses a simple swing motion concept while OverTilt Track algorithm uses optimal pre-positioning to account for maneuver characteristics for coordinating tilt adjustments. An experiment was conducted on the US Army Tank Automotive Research, Development and Engineering Center (TARDEC) Ride Motion Simulator (RMS) platform comparing the two novel motion cueing algorithms to a pre-existing algorithm and a no-motion condition.

Real time man-in-the-loop simulation can be used in a variety of research, testing and training roles where safety, efficiency and/or economy are important. Simulation can allow complete control and uniformity over driving conditions and permit analysis of a range of vehicle and driver behavior variables. Simulation complexity and fidelity requirements will vary depending on application requirements. This paper reviews past and current driving simulation development efforts and applications. Simulation requirements are assessed relative to various applications, including vehicle handling, driver behavior, training, licensing and fitness for duty testing.

Automatic and four wheel steering control laws are often developed from the performance point of view to optimize rapid response. Under linear tire operating conditions (i.e., maneuvering at less than .5g's) both performance and safety conditions can be simultaneously met. Under severe operating conditions, such as might be encountered during crash avoidance maneuvering, tire characteristics can change dramatically and induce directional dynamic instability and spinout. The challenge in automatic and four wheel steering system design is to achieve a compromise between performance and safety. This paper will describe analyses carried out with a validated vehicle dynamics computer simulation that shed some light on the vehicle and control characteristics that influence tradeoffs between performance and safety. The computer simulation has been validated against field test data from twelve vehicles including passenger cars, vans, pickup trucks and utility vehicles.

Ground vehicle dynamic stability, including spinout and rollover, is highly dependent on maneuvering conditions and the nonlinear force response characteristics of tires. Depending on vehicle configuration, unstable behavior requires high, sustained lateral acceleration, and some maneuver induced excitation of the roll and yaw mode dynamics. Dynamic instability in some vehicles can be induced by a steering reversal maneuver that involves sustained limit performance lateral acceleration. Using a validated vehicle dynamics simulation, analysis is presented to illustrate what constitutes a critical stability sensitive maneuver. Two example test cases are used to show that a critical stability sensitive maneuver must be more severe than a single lane change. Even reaching tire saturation limits during an aggressive single lane change does not give the sustained lateral acceleration required to provoke instability conditions.

This paper considers experience gained from conducting fitness-for-duty testing in the work place, and reviews results obtained with a specific psychomotor task. Performance testing can provide a means for assessing worker fitness-for-duty prior to their admittance to safety critical job functions, but the testing must be reliable and efficient. This paper will discuss the balance between efficacy and efficiency and provide example data from a test that is currently employed in the work place.