Search Results

This paper summarizes the activities of the University of Maryland Space Systems Laboratory in performing a design study for a minimum functionality lunar habitat element for NASA's Exploration Systems Mission Directorate. By creating and deploying a survey to personnel experienced in Earth analogues, primarily shipboard and Antarctic habitats, a list of critical habitat functions was established, along with their relative importance and their impact on systems design/implementation. Based on a review of relevant past literature and the survey results, four habitat concepts were developed, focused on interior space layout and preliminary systems sizing. Those concepts were then evaluated for habitability through virtual reality (VR) techniques and merged into a single design. Trade studies were conducted on habitat systems, and the final design was synthesized based on all of the results.

The MX-2 neutral buoyancy space suit analogue has been designed and developed at the University of Maryland to facilitate analysis of space suit components and assessment of the benefits of advanced space suit technologies, The MX-2 replicates the salient features of microgravity pressure suits, including the induced joint torques, visual, auditory and thermal environments, and microgravity through the use of neutral buoyancy simulation. In this paper, design upgrades and recent operations of the suit are outlined, including many experiments and tests of advanced space suit technologies, This paper focuses on the work done using the MX-2 to implement and investigate various advanced controls and displays within the suit, to enhance crewmember situational awareness and effectiveness, and enable human-robotic interaction.

Real time knowledge of the metabolic workload of an astronaut during an Extra-Vehicular Activity (EVA) can be instrumental for space suit research, design, and operation. Three indirect calorimetry approaches were developed to determine the metabolic workload of a subject in an open-loop space suit analogue. A study was conducted to compare the data obtained from three sensors: oxygen, carbon dioxide, and heart rate. Subjects performed treadmill exercise in an enclosed helmet assembly, which simulated the contained environment of a space suit while retaining arm and leg mobility. These results were validated against a standard system used by exercise physiologists. The carbon dioxide sensor method was shown to be the most reliable and a calibrated version of it will be integrated into the MX-2 neutral buoyancy space suit analogue.

The next generation of pressure suits must enable large-scale planetary Extra-Vehicular Activities (EVA). Astronauts exploring the moon and Mars will be required to walk many kilometers, carry large loads, perform intricate experiments, and extract geological samples. Advanced pressure suit architectures must be developed to allow astronauts to perform these and other tasks simply and effectively. The research developed here demonstrates integration of robotics technology into pressure suit design. The concept of a robotically augmented pressure suit for planetary exploration has been developed through the use of analytical and experimental investigations. Two unique torso configurations are examined, including a Soft/Hard Upper Torso with individually adjustable bearings, as well as advances in Morphing Upper Torso research, in which an all-soft torso is analyzed as a system of interconnected parallel manipulators.

The fit of a spacesuit has been identified as a crucial factor that will determine its usability. Therefore, because one-size-fits-all spacesuits seldom fit any wearer well, and because individually tailored spacesuits are costly, the University of Maryland has conducted research into a resizable Extravehicular Activity (EVA) suit. This resizing is accomplished through a series of cable-driven parallel manipulators, which are used to adjust the distance between plates and rings built into a soft space suit. These actuators, as well as enabling passive suit resizing, could be used to actively assist the astronaut's motion, decreasing the torques that must be applied for movement in a pressurized suit. This paper details the development and testing of an arm prototype, which is used to better understand the dynamics of a more complex torso-limb system.

In the present study, 8 experienced neutral buoyancy test divers were instructed to maintain quiet relaxed posture while ‘standing’ in instrumented space shuttle middeck (IVA) type foot restraints in the Space Systems Laboratory (SSL) Neutral Buoyancy Research Facility (NB) and onboard the NASA KC-135 reduced gravity aircraft (PF). Foot restraint reaction loads and subject joint angles were recorded during blind and sighted conditions. Visual cues played a significant role in subject anxiety onboard the KC; however, while subject joint angles and reaction loads differed between NB and PF conditions, no differences were found between sighted and blind conditions in either simulation environment for reaction loads or joint angles. This very surprising result indicates that there are not only anecdotal but concrete differences between reduced gravity and terrestrial posture mechanisms.

Since the earliest days of manned space flight, robotics and human activities have tended to view each other as the competition. Although the International Space Station lists robotic servicing as an alternative to extravehicular activity (EVA) operations, there has been little consideration of significant cooperation between humans and telerobots in the same work site. This paper proposes the establishment of a list of potential interaction levels between humans and robots in the extravehicular work site: Robotic assistant Robotic associate Robotic surrogate Robotic specialist Human/robotic symbiosis The first three categories deal with increasing levels of robotic capability to perform EVA tasks, particularly with EVA interfaces. “Specialist” activities refer to specific task assignments that are singularly associated with humans or robots, such as an Astronaut Support Vehicle or a Telerobotic Rescue System for EVA.

There has recently been an increasing focus on humans working cooperatively with robotic systems in space exploration and operations. Considerable work has been performed on distributed architectures to enable such interaction. The research described here looks at the human-robot interaction from the EVA astronaut's perspective, describing a first generation human-machine interface implemented and tested on an existing experimental spacesuit analog, the MX-2. The ultimate goal is to enable EVA astronauts to operate more independently of remote operators and work effectively with autonomous and teleoperated robots. The current system integrates speech interaction and visual interfaces as a first step towards this goal.

The research discussed in this paper demonstrates further advancements in the concept of a Morphing Upper Torso, which incorporates robotic elements within the pressure suit design to enable a resizable, highly mobile and easy to donn/doff spacesuit. A full scale experimental model has been made, which accompanies several analytical models. The Jacobian matrix for the robotic system, which multiplies the total twist vector of the system to yield the vector of actuator velocities, is derived. This dynamic analysis enables quantification of the dynamic actuator requirements, given demanded trajectories of the rings. A motion capture pilot study was done to develop a methodology to obtain measurements of suit movement and hence the ring trajectories. Subjects performed various tasks that a suited astronaut may perform on a planetary surface, while wearing a torso mockup within the motion capture system.

This paper describes a unique concept for donning and doffing a spacesuit from a pressurized rover or habitat, which merges three independent concepts: suitports, neck-entry EVA suits, and the Morphing Upper Torso. The union of these concepts creates a novel and exciting suit and suitport system architecture, with many potential benefits over traditional suitport systems. To develop this concept, a neck-entry Morphing Upper Torso experimental model has been designed and fabricated, and systems level design studies have been performed, including visualization with the aid of CAD models of the neck-entry suitport on a small pressurized rover and a lunar habitat. As well, a donning test-station has been developed and used for experiments in 1-G, simulated microgravity and simulated partial gravity.

Performance of new space suit designs is typically tested quantitatively in laboratory tests, at both the component and integrated systems levels. As the suit moves into neutral buoyancy testing, it is evaluated qualitatively by experienced subjects, and used to perform tasks with known times in earlier generation suits. This paper details the equipment design and test methodology for extended space suit performance metrics which might be achieved by appropriate instrumentation during operational testing. This paper presents a candidate taxonomy of testing categories applicable to EVA systems, such as reach, mobility, workload, and so forth. In each category, useful technologies are identified which will enable the necessary measurements to be made. In the subsequent section, each of these technologies are examined for feasibility, including examples of existing technologies where available.

Past approaches to space suit glove evaluation have primarily been subjective. This report details efforts at the University of Maryland Space Systems Laboratory to use standardized dexterity tests and advanced biomechanics instrumentation to provide objective measures of glove performance. Ten subjects participated in the study. Tests were conducted barehanded, and wearing pressurized and unpressurized space suit gloves. Data on performance time, range of motion, dexterity, strength, fatigue, and comfort were collected. Range of motion data was measured using an experimental data glove that instrumented the movement of the joints of the right hand. The results indicated that performance time wearing pressurized gloves is not adequately estimated by performance wearing unpressurized gloves. Also, joint angle results indicated a decrease in the range of motion from the bare handed condition, but no significant difference between the gloved-hand conditions.

Neutral buoyancy (NB) and parabolic flight (PF) are the only presently available human-scale three-dimensional spaceflight simulation environments, and as such, both NB and PF are used extensively to simulate spaceflight conditions for both research and mission operations purposes. However, there is little or no quantitative (or even qualitative) material in the literature to characterize the fidelity of either environment to its analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while “standing” in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; tilted 90° Front, 90° Back, 90° Right, and 90° Left.

Neutral buoyancy (NB) and parabolic flight (PF) are the only available human-scale three-dimensional spaceflight simulation environments. As such, both environments are used extensively for both research and mission operations purposes despite a lack of quantitative (or even qualitative) characterization of the fidelity of either environment to the spacelfight analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while ‘standing’ in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; and tilted 90° Front, Back, Right, and Left. PF limitations prohibited 90° testing; consequently the PF test protocol included only Upright and 45° orientations.

With NASA's resources dedicated to the six-fold increase in extravehicular operations required for the construction of International Space Station, there are few or no opportunities to conduct neutral buoyancy research which requires the use of pressure suits. For this reason, the University of Maryland Space Systems Laboratory has developed a system which replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation and EVA/robotic interactions. The MX-2 suit analogue is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft goods (pressure bladder, restraint layer, and thermal/micrometeoroid garment with integral ballast system) are used for the arms and lower torso.

The hybrid elastic design is based upon an American Society for Engineering Education (ASEE) glove designed by at the Space Systems Laboratory (SSL) in 1985. This design uses an elastic restraint layer instead of convolute joints to achieve greater dexterity and mobility during EVA (extravehicular activity). Two pilot studies and a main study were conducted using the hybrid elastic glove and a 4000-series EMU (extravehicular activity unit) glove. Data on dexterity performance, joint range of motion, grip strength and perceived exertion was assessed for the EMU and hybrid elastic gloves with correlations to a barehanded condition. During this study, 30 test subjects performed multiple test sessions using a hybrid elastic glove and a 4000-series shuttle glove in a 4.3psid pressure environment. Test results to date indicate that the hybrid elastic glove performance is approximately similar to the performance of the 4000-series glove.

A fully operational space suit analogue for use in a neutral buoyancy environment has been developed and tested by the University of Maryland’s Space Systems Laboratory. Repeated manned operations in the Neutral Buoyancy Research Facility have shown the MX-2 suit analogue to be a realistic simulation of operational EVA pressure suits. The suit is routinely used for EVA simulation, providing reasonable joint restrictions, work envelopes, and visual and audio environments comparable to those of current EVA suits. Improved gloves and boots, communications carrier assembly, in-suit drink bag and harness system have furthered the semblance to EVA. Advanced resizing and ballasting systems have enabled subjects ranging in height from 5′8″ to 6′3″ and within a range of 120 lbs to obtain experience in the suit. Furthermore, integral suit instrumentation facilitates monitoring and collection of critical data on both the suit and the subject.

The University of Maryland Space Systems Laboratory and ILC Dover LP have developed a novel concept: a soft pressure garment that can be dynamically reconfigured to tailor its shape properties to the wearer and the desired task set. This underlying concept has been applied to the upper torso of a rear entry suit, in which the helmet ring, waist ring and two shoulder rings make up a system of four interconnected parallel manipulators with tensile links. This configuration allows the dynamic control of both the position and orientation of each of the four rings, enabling modification of critical sizing dimensions such as the inter-scye distance, as well as task-specific orientations such as helmet, scye and waist bearing angles. Half-scale and full-scale experimental models as well as an analytical inverse kinematics model were used to examine the interconnectedness of the plates, the role of external forces generated by pressurized fabric, and the controllability of the system.

The Ranger Telerobotic Flight Experiment is a highly complex teleoperated spacecraft, requiring direct human control of 36 major degrees of freedom. The University of Maryland Space Systems Laboratory and the NASA Ames Research Center are cooperating on the development of a virtual reality control station to streamline human interfaces with the Ranger spacecraft. This describes the design and integration of the Ranger Command Chair, a system incorporating fully immersive helmet-mounted stereo displays with head tracking, hand tracking for direct positional control, and supplemental controls and displays to allow a single operator to functionally control the entire vehicle. This system is currently undergoing tests with the Ranger Neutral Buoyancy Vehicle, a functionally identical vehicle used for systems development and flight operations simulations.

The University of Maryland has performed a detailed design for the space equivalent of an atmospheric diving suit. The Space Construction and Orbital Utility Transport (SCOUT) is a small single-person spacecraft, with all necessary utilities for extended sorties away from the host station. Through a pair of AX-5 style space suit arms integrated into the cabin wall, as well as a trio of dexterous manipulators, the SCOUT operator can directly interact with the work site environment, performing spacecraft servicing, structural assembly, or other tasks traditionally done by an astronaut in a space suit. Originally designed as an augmentation to the NASA Gateway station architecture for the Earth-Moon L1 system, studies indicate that a SCOUT-type EVA system would represent a substantial benefit to International Space Station operations as well.