Search Results

In a vehicle's development process, Transfer Path Analysis (TPA) is commonly used for identifying sound sources and their transmission to a receiver. Forces acting on the structure are the reason for the structure-borne sound share of the vehicle interior noise. In practice it is not possible, or too extensive, to measure operational forces directly. Instead, they are often calculated indirectly from accelerations and from additionally measured inertances. As the car body is a strongly coupled system, a force acting at one position results in accelerations throughout the structure. This crosstalk must be considered by using a dense inertance matrix consisting of the ratios between each force excitation and the accelerations at every sensor position. Then a matrix inversion is performed to solve the system of equations describing the coupling of the structure.

The powertrain noise of cars has been reduced in the last decades. Therefore in many cases, rolling tires have increasingly become the dominant sources of vehicles' interior noise. For sound design or a reduction of tire-road noise it is important to know the individual noise shares of the tires and their transfer paths. Authentic tire-road noise can only be measured on a real road, not on a roller dynamometer. So far measurements have been performed during a coast-down on the road with the engine switched off, avoiding the influence of engine noise. Operational Transfer Path Analysis (OTPA) can be used to remove the uncorrelated wind noise, and to synthesize structure-borne and airborne tire-road noise based on input signals measured with microphones at the tires and a triaxial accelerometer at each wheel carrier. Simultaneously, the interior noise is recorded by an artificial head.

Interior vehicle sound is an important factor for customer satisfaction. To achieve an optimized product sound at an early stage of development, subjective evaluation methods as well as analysis and prediction tools must be combined to provide reliable information relevant to product quality and comfort judgments. Binaural Transfer Path Synthesis (BTPS) is a well-known method to calculate interior noise and vibrations based on multi-channel input measurements. Recent enhancements of the BTPS method enable taking into account also simulated excitations, for example engine mount vibrations calculated using MBS and/or FEM simulations, allowing the prediction of interior noise even if the engine is not available in hardware. Interactive evaluation of the generated sounds in a vibro-acoustic driving simulator helps to increase understanding of customer responses and perception of target sounds.

Diesel impulsiveness (so called Diesel knocking) present in the cabin of diesel vehicles is perceived as unpleasant because of its impulsive time structure. JD Power data clearly show the customers preference of vehicles with little Diesel knocking over those with severe knocking. Corresponding objective descriptors that reflect the customers' perception are introduced. The occurrence of such noise patterns is influenced by the combustion process itself as well as by all excited mechanical components within the power train. Further the transfer characteristics of the engine structure and various vehicle noise paths do contribute to a poor Diesel Sound Quality. It is essential that all these factors have to be considered in combination. This paper provides an overview about suitable methods and technologies, including Binaural Transfer Path Analysis and Synthesis. The potential of the approach is demonstrated by an example.

Vehicle interior noise consists of a superposition of broadband contributions from powertrain, wind, and tire-road noise. Tire-road noise has become increasingly important referring to overall acoustic comfort, especially for (luxury) sedans with pleasant low-noise engine sounds. An interior noise recording during a coast-down (engine switched off) contains different components: a mixture of wind along with airborne and structure-borne tire-road noise shares. Separating the mixture into these components requires appropriate algorithms and additional measurements. Therefore, structure-borne excitation signals as well as the airborne noise radiation of all four tires are measured simultaneously to an artificial head recording in the vehicle interior during a coast-down test from maximum vehicle speed to standstill.

With the exact knowledge of the current positions of the microphones in an array and the potential noise sources, it is possible to compensate a relative motion between them. In the past, techniques exploiting this knowledge have been used successfully, e.g., for the measurement of wind turbines and airplane flyover measurement. In this paper, these ideas are applied and modified for the development of a traffic flow observation system. The main purpose of a vehicle pass by measurement is to extract the continuous noise levels of the dominant sources. With the use of advanced video processing or additional sensor information (radar, light barrier) it is possible to create a continuous tracking model of the vehicle. The scan grid in the beam forming algorithm is then recalculated to compensate the movement. In the resulting acoustic video, the vehicle is fixed and the evolution of the sound sources can be observed and auralized for psychoacoustic evaluations.

Besides powertrain and aerodynamic noise, tire-road noise is an important aspect of the acoustic comfort inside a vehicle. For the subjective evaluation of different tires or vehicles in a benchmark, authentic sound examples are essential. They should be recorded on a real road rather than on a roller dynamometer (avoiding artificial and periodic sounds, especially in the case of a small roller circumference and a smooth surface). The challenge of on-road measurements is the need for separating the components of the interior noise generated by rolling tires, aerodynamic flow and powertrain. This allows for individual judgment of the noise shares. A common approach for eliminating the engine sound is shutting the engine off after acceleration to the desired maximum speed. Operational Transfer Path Analysis (OTPA) can then be used to auralize the tire-road noise at a certain receiver location, where an artificial head records the interior noise during this coast-down.

Vehicle interior noise can be regarded as the sum of all panel contributions which enclose the compartment. In order to experimentally investigate the sound contributions of individual panels, the so-called “window method” is often used. Due to some fundamental drawbacks, a new method has been invented which is considered a useful alternative. The theoretical background of the method is covered in this paper, as well as application examples illustrating the performance and advantages of this new technique.