Refine Your Search

Date

Date

Topic

Topic

Electrical, Electronics, and Avionics Seats and seating OPTC3, Lighting and Sound Committee Vehicles and equipment Aircraft Aircraft structures

Search Results

Viewing 1 to 20 of 59
123Next >Last >>
Sort by published
Standard

Discriminating Back-Up Alarm System Standard
1999-06-01
CURRENT
J1741_199906
This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.
Standard

LED Work Lighting Devices
2022-06-13
CURRENT
J2895_202206
This SAE Recommended Practice provides general design performance requirements and related test procedures for LED “white” lighting unit assemblies, other than signal and marking devices, used on Earthmoving, Road Building, and Maintenance off-road work machines as defined in SAE J1116. This report is intended to serve as a guide to standard practice and is subject to change to reflect additional experience and technical advances.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION AND INDUSTRIAL MACHINERY
1980-04-01
HISTORICAL
J598_198004
This recommended practice applies to floodlamp and headlamp units intended for use on off-highway vehicles and machines generally known as earthmoving equipment. Other performance and dimensional information is contained in SAE J572 and SAE J760.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1987-05-01
HISTORICAL
J598_198705
This recommended practice applies to floodlamp, headlamp and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2) and forestry machines (4), as noted on SAE J1116. Construction and Industrial Machinery is normally operated off highways, therefore, this SAE Recommended Practice is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1994-06-01
HISTORICAL
J598_199406
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2), and forestry machines (4), as noted in SAE J1116. Construction and Industrial Machinery is normally operated off highways; therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Standard

Sound Power Level Measurements of Work Machines - Static and In-Place Dynamic Methods
2013-06-20
CURRENT
J1805_201306
This SAE Standard is used to determine the exterior A-weighted equivalent sound power level of static and in-place dynamic machines (dozer, loader, excavator, and backhoe) similar to the sound power obtained in ISO 6393 static and ISO 6395 dynamic sound power test procedures. Additional machine types, specifically sweepers and scrubbers, covered by SAE J2130 have been added, and other work machine types covered by SAE J1116 may be added with appropriate cycle descriptions and machine preparation. The recommended test procedures include conventional integrating sound pressure level methods or the sound intensity method using paired microphones. The sound intensity methodology provides a practical indoor alternative and permits measurement in the factory environment. The procedures in this document assume that the dominant sources are not highly sensitive to load (i.e., cooling fan, engine, track system).
Standard

SOUND POWER LEVEL MEASUREMENTS - EARTHMOVING MACHINERY (DOZER, LOADER, EXCAVATOR, AND BACKHOE) - IN PLACE DYNAMIC - SOUND PRESSURE LEVEL OR SOUND INTENSITY METHOD
1987-04-01
HISTORICAL
J1805_198704
The requirements for setting up and operating the machinery, the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with manufacturer's recommendations pending finalization of ANSI documents on the subject of sound intensity procedures. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.
Standard

Sound Measurement—Off-Road Work Machines—Operator—Singular Type
2009-01-13
HISTORICAL
J919_200901
This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.
Standard

Sound Measurement - Off-Road Work Machines - Operator - Singular Type
2013-07-24
CURRENT
J919_201307
This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.
Standard

OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE CONSTRUCTION MACHINERY—SINGULAR TYPE TEST
1976-03-01
HISTORICAL
J919B_197603
This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring sound levels at the operator station for powered mobile construction machinery of 15 kW (20 bhp) rated and over. This Recommended Practice is to cover machinery that has operator stations where the operator can either stand or sit and will be transported by the machine during its operation. The sound levels obtained by using the test procedures set forth in this SAE Recommended Practice are in general repeatable and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle.
Standard

OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY—SINGULAR TYPE TEST
1979-04-01
HISTORICAL
J919C_197904
This SAE Standard is applicable to machinery of 15 kw (20 bhp) rated and over, that have operator stations where the operator can either stand or sit and will be transported by the machine during its operation. It is not intended for use with agricultural equipment. The sound levels obtained by using the test procedures set forth in this SAE Standard are in general repeatable, and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle. For measurement and calculation of the operator’s sound exposure, use SAE Recommended Practice J1166a.
Standard

SOUND MEASUREMENT - EARTHMOVING MACHINERY - OPERATOR - SINGULAR TYPE
1986-06-01
HISTORICAL
J919_198606
This SAE Standard is applicable to machinery that have operator stations where the operator can either stand or sit and will be transported by the machine during its operation. It is not intended for use with agricultural equipment. The sound levels obtained by using the test procedures set forth in this SAE Standard are in general repeatable, and are representative of the higher range of the sound levels generated by the machinery under field operating conditions, but do not necessarily represent the equivalent sound level over a field use cycle. For measurement and calculation of the operator's sound exposure, use SAE Recommended Practice J1166 JUN86.
Standard

Sound Measurement - Off-Road Work Machines - Exterior
1975-06-01
HISTORICAL
J88A_197506
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound levels for self-propelled sweepers as defined in SAE J2130 and self-propelled off-road work machines in categories 1,2,4, and 5 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.
Standard

Sound Measurement—Off-Road Work Machines—Exterior
2006-02-09
HISTORICAL
J88_200602
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.
Standard

EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE CONSTRUCTION EQUIPMENT
1972-11-01
HISTORICAL
J88_197211
This SAE Recommended Practice sets forth the instrumentation and procedure to be used in measuring exterior sound levels for powered mobile construction equipment of 20 rated bhp and over. It is not intended to cover operation of safety devices (such as backup alarms) and equipment designed primarily for operation on highways or within factories and building areas, aircraft, or recreational vehicles, such as snowmobiles and boats. The sound levels obtained by using the test procedures set forth in this SAE Recommended Practice are repeatable and representative of the sound levels generated by the equipment during normal operating conditions.
Standard

Sound Measurement - Off-Road Work Machines - Exterior
2013-06-20
CURRENT
J88_201306
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.
Standard

EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY
1979-04-01
HISTORICAL
J88B_197904
This SAE Standard is applicable to machinery of 15 kw (20 rated bhp) and over. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.
Standard

SOUND MEASUREMENT—EARTHMOVING MACHINERY—EXTERIOR
1985-03-01
HISTORICAL
J88_198503
This SAE Standard is applicable to machinery of 15 kw (20 rated bhp) and over. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.
123Next >Last >>
X