Search Results

Training / Education

Design for Manufacturing & Assembly

Design for Manufacturing and Assembly (DFM+A), pioneered by Boothroyd and Dewhurst, has been used by many companies around the world to develop creative product designs that use optimal manufacturing and assembly processes.  Correctly applied, DFM+A analysis leads to significant reductions in production cost, without compromising product time-to-market goals, functionality, quality, serviceability, or other attributes.  This course will include information on how DFM+A fits in with QFD, Concurrent Engineering, Robust Engineering, and other disciplines.

Training / Education

LIDAR and Infrared Cameras for ADAS and Autonomous Sensing

This course examines ADAS and autonomous vehicle technologies that offer the potential to increase safety while attempting to optimize the cost of car ownership. LIDAR (light detection ranging) and Infrared camera sensing are seeing a rapid growth and adoption in the industry. However, the sensor requirements and system architecture options continue to evolve almost every six months. This course will provide the foundation to build on for these two technologies in automotive applications. It will include a demonstration model for LIDAR and Infrared camera.

Training / Education

Model-based Development of Embedded Software in Compliance with ISO 26262 – Challenges and Effective Solutions

This training class describes how to develop and safeguard safety critical embedded software in serial projects with Simulink in compliance with ISO 26262 (part 6). Beginning with a general overview of the ISO standard, we proceed by focusing on the ISO 26262 requirements that are specifically relevant to model based development. We address the impact the standard has had on model-based development with Simulink, as well as the requirements for model and software architecture in safety critical software. We also look at modeling guidelines and testing before wrapping up the class by assessing ISO 26262 readiness of controller functions.

Training / Education

EMC Design for PCB Design for New Energy Vehicles

This course is offered in China only and presented in Mandarin Chinese. Developing environmentally cleaner and more fuel efficient vehicles is transforming the automotive industry worldwide. There are many engineering challenges that must be addressed in designing effective new energy vehicles. The technical knowledge required to understand and make the right decisions with regard to powertrain architecture, powertrain controls, and energy management strategies is critical to success in this market.

Training / Education

Applications of GD&T ASME 14.5 - 1994 & 2009 Foundational Level

This course teaches the thought processes involved in assigning GD&T to components, and it changes the way many engineers think about part tolerancing. The course focuses on what constitutes good and poor drawing practices, common dimensioning methods used in industry, using GD&T to communicate system functions on component dimensions, and the logic of how to apply GD&T to components. You’ll also learn how to select datum features and how to fully define component surfaces using GD&T. Establishing tolerance values is not covered.   

Training / Education

Automotive NVH Analysis and Control

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). The course introduces the basic knowledge of vehicle noise and vibration, provides the analysis and control methods for noise and vibration sources, and transfer paths, and describes the occupants' responses and control. The course is specially designed for NVH engineer and related graduate participants. The course combines the NVH theory and engineering practices. After finishing the course, the students will deeply understand the mechanism of NVH and promote their capacity to solve engineering problems. 

Training / Education

GD&T Review and Application

Led by our senior GD&T professionals with a wide variety of industry background and experience, this one-day GD&T Review and Application course is designed for organizations who have participated in training through SAE but are looking for further clarification on how to apply GD&T best practices to specific organizational drawings. Designed to assist your design teams with highly complex design analysis problems and to support your teams through real world drawing examples, the instructor will review, answer questions, and provide feedback on tolerance analysis and GD&T implementation.

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Advanced Level

This 3-day advanced-level Fundamentals of GD&T course is an in-depth study of the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The course can be conducted in three 8-hour sessions or with flexible scheduling including five mornings or five afternoons.  This class includes all the content from the Fundamentals of GD&T 2-day foundational course: an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations.

Training / Education

Comparison of ASME Y14.5 1994 to 2009 - Introductory Level

This 1-day introductory-level course offers an explanation of features in the ASME Y14.5-2009 Standard and compares them to the 1994 Standard. The course covers the pertinent changes made to the Y14.5 standard, including how the subject matter has been reorganized and about new sections that have been created for profile, orientation, and form. Each participant receives: An ASME Y14.5 1994-2009 Comparison Workbook,  Class handouts,  A GD&T Ultimate Pocket Guide (2009), and An ASME Y14.5 1994-2009 Comparison Chart Set. Newly acquired learning is reinforced throughout the class with numerous practice exercises.

Training / Education

Design Considerations for Electrohydrostatic Actuators

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. This four-hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications.  The instructor will present the critical topics of electrohydrostatic actuation (EHA) from a systems development perspective (V-Approach).  Beginning with aircraft system requirements, the instructors will then guide participants through EHA subsystem requirements, component design, component verification test, aircraft integration, and use. 

Training / Education

Design Considerations for Electromechanical Flight Control Actuation Systems

This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.

Training / Education

Introduction to Aircraft Hydraulic System Design and Certification

This four-hour short course provides an overview of hydraulic system design of typical business and commercial aircraft. Topics will include the principles, system architectures, power sources, and the main components and technologies of hydraulic systems including hydraulic power generation, filtration, fluid storage, distribution, sensing and control. The step by step process of designing a hydraulic system will also be reviewed. Additionally, future trends in hydraulic systems will be discussed.

Training / Education

Fundamentals of GD&T ASME Y14.5 - 2009 Advanced Level

This 3-day Fundamentals of GD&T course provides an in-depth study of the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing, as prescribed in the ASME Y14.5-2009 Standard. The course can be conducted in three 8-hour sessions or with flexible scheduling including five mornings or five afternoons. 

Training / Education

Fundamentals of GD&T for Inspectors - Foundational Level

This 2-day foundational-level course builds on geometric dimensioning and tolerancing fundamentals and teaches an introduction of how to inspect GD&T requirements.  The course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems).

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Foundational Level

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The class offers an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations. It compares GD&T to coordinate tolerancing, Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 100 practice problems using industrial drawings.

Training / Education

Advanced Concepts of GD&T ASME Y14.5M 1994 - Foundational Level

This 2-day foundational-level course teaches advanced geometric dimensioning and tolerancing topics as prescribed in the ASME Y14.5M-1994 Standard. 

Training / Education

ASME Y14.5 GD&T for Manufacturing - Introductory Level

This 1-day introductory-level course builds on fundamentals of geometric dimensioning and tolerancing and teaches the impact of GD&T on the manufacturing process. The course focuses on the basic requirements of engineering drawings, size dimensions, form tolerances, and the datum system, as well as how tolerancing requirements affect production. Each participant receives: A GD&T for Manufacturing Workbook,  A GD&T Ultimate Pocket Guide (2009), and Class handouts.  Newly acquired learning is reinforced with numerous practice exercises.

Training / Education

Design and Evaluation of Automotive Static Perceptual Quality

This course is offered in China only and presented in Mandarin Chinese. Static perceptual quality is the term applied to the customer’s first impression of a car at the beginning of the buying process including how it looks, feels, and smells. This “first feeling” largely determines whether the customer continues through the purchase process. At present, OEMs have no systematic method for static perceptual quality in the whole vehicle design and development process, especially for the static perceptual quality review in the early stage of design and development before data freezing.

Training / Education

Road Noise Control Technology

This course is offered in China only and presented in Mandarin Chinese. Sound quality is one of the most important desired attributes for the customers, and road noise is one of the most vital factors influencing sound quality. Road noise is the major interior noise source, especially for EVs, and it is a common customer complaint. In order to improve the customers’ satisfaction and market share, almost all the OEMs have spent lots of sources on the road noise attenuation.

Training / Education

Theories and Methods of Future HMI Design for Automobiles

This course is offered in China only and presented in Mandarin Chinese. HMI design is an Interdisciplinary, which is based on human cognitive psychology and combines humanities, sociology, aesthetics, information science and other disciplines. While automotive technologies can be applied regardless of regions, HMI must be localized, as it is closely related to regional culture, people's living habits and characteristics. At the same time, HMI design has its own complete theoretical system, research and design methods and testing methods, instead of relying on experience.