Search Results

Standard

Full Adaptive Forward Lighting Systems

2020-03-12

CURRENT

J2838_202003

This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).

Standard

Full Adaptive Forward Lighting Systems

2013-03-05

HISTORICAL

J2838_201303

This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).

Standard

AUXILIARY LOW BEAM LAMPS

1995-03-01

HISTORICAL

J582_199503

This SAE Recommended Practice provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.

Standard

AUXILIARY LOW BEAM LAMP

1973-01-01

HISTORICAL

J582A_197301

This standard provides design requirements and test methods for an auxiliary low beam lamp.

Standard

AUXILIARY LOW BEAM LAMPS

1984-09-01

HISTORICAL

J582_198409

This SAE Technical Report provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.

Standard

Distributed Lighting Systems (DLS)

2011-02-24

CURRENT

J2282_201102

This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.

Standard

Distributed Lighting Systems (DLS)

2007-08-21

HISTORICAL

J2282_200708

This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.

Standard

DIMENSIONAL SPECIFICATIONS FOR GENERAL SERVICE SEALED LIGHTING UNITS

1997-04-01

HISTORICAL

J760_199704

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

1999-06-01

HISTORICAL

J760_199906

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

REPLACEABLE BULBS FOR HEADLAMPS

1988-11-01

HISTORICAL

J1496_198811

This technical report covers performance requirements, design requirements, and design guidelines for replaceable bulbs which may be used in headlamp applications.

Standard

Headlamp Design Guidelines for Mature Drivers

2011-02-24

CURRENT

J1606_201102

This SAE Information Report should be used as a supplement to SAE J1383 (Reference 2.1.1). It is intended to provide additional information which is important to the automotive designer and engineer in the process of designing, developing, and engineering the headlamps of motor vehicles which will take into account the effects of the aging process on the driver.

Standard

Pedestrian Visibility—Low Beam Optimization to Reduce Night-time Fatalities

2009-02-27

HISTORICAL

J2829_200902

The primary purpose of vehicle forward lighting is not to see the world but to see the road! In their simplest form, headlights help drivers negotiate a safe path on the road. They do this by lighting the roadway according to (a multitude of) specific standards. For decades, discussions concerning the niceties of illuminating potential obstacles in the roadway were little more than an academic pursuit as there simply were not sufficient lumens available from filament light sources to achieve all of the desired tasks no matter how worthy they might be. Not unexpectedly, the technology has evolved with the introduction of high output metal-halide sources, multi-task standards combined with multilevel lighting devices and discrete LED sources offering high luminous efficiencies and the means to deliver the light where it can be most useful. The question now becomes one of determining where the available light should be directed.

Standard

Pedestrian Visibility - Low Beam Optimization to Reduce Night-time Fatalities

2011-02-24

CURRENT

J2829_201102

The primary purpose of vehicle forward lighting is not to see the world but to see the road! In their simplest form, headlights help drivers negotiate a safe path on the road. They do this by lighting the roadway according to (a multitude of) specific standards. For decades, discussions concerning the niceties of illuminating potential obstacles in the roadway were little more than an academic pursuit as there simply were not sufficient lumens available from filament light sources to achieve all of the desired tasks no matter how worthy they might be. Not unexpectedly, the technology has evolved with the introduction of high output metal-halide sources, multi-task standards combined with multilevel lighting devices and discrete LED sources offering high luminous efficiencies and the means to deliver the light where it can be most useful. The question now becomes one of determining where the available light should be directed.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2013-06-06

HISTORICAL

J3003_201306

This SAE Recommended Practice provides dimensional specifications for the 41/2 and 53/4 inch general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2017-11-16

CURRENT

J3003_201711

This SAE Recommended Practice provides dimensional specifications for the 41/2 and 53/4 inch general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2012-09-11

HISTORICAL

J3003_201209

This SAE Recommended Practice provides dimensional specifications for the 114mm (4½ inch) and 146mm (5¾ inch) general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2012-02-13

HISTORICAL

J3003_201202

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

SEALED BEAM HEADLAMP UNITS FOR MOTOR VEHICLES

1974-12-01

HISTORICAL

J579C_197412

This standard applies to design evaluation of mechanically aimable sealed beam headlamp units for two-beam systems. For service performance requirements and evaluations, see SAE J32.

Standard

SEALED BEAM HEADLAMP UNITS FOR MOTOR VEHICLES

1973-04-01

HISTORICAL

J579B_197304

This standard applies to design evaluation of mechanically aimable sealed beam headlamp units for two-beam systems. For service performance requirements and evaluations, see SAE J32.

Standard

Limited Adaptive Forward Lighting System

2017-05-19

CURRENT

J2591_201705

This SAE Recommended Practice applies to motor vehicle Forward Illumination Devices which incorporate limited adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.