Search Results

This paper presents an analysis of coupled longitudinal and lateral dynamics of a 4×4 hybrid-electric off-road vehicle (HEV) with two passive driveline systems, including drivelines with (i) an interaxle open symmetrical differential in the transfer case and (ii) a locked transfer case, i.e., positive engagement of two axles. The axle differentials are open. As the study proved, lateral dynamics of the 4×4 HEV, characterized by the tire side forces, vehicle lateral acceleration, yaw rate and tire gripping factors can be impacted by the tire longitudinal forces, whose magnitudes and directions (positive-negative) strongly depend on the driveline characteristics. At the same time, the tire side forces impact the relation between the longitudinal forces and tire slippages.

Normal and longitudinal dynamics of vehicles interrelates via the normal and longitudinal tire reactions. The normal reactions are supposed to be formed by characteristics of the suspension system and tires, and the longitudinal forces in the tire patches are produced by the driveline system by supplying torques to the drive wheels. Usually, the normal and longitudinal reactions, independently generated by the two vehicle systems, are considered to interrelate, but not to impact each other. An analytical study presented in this paper showed that the normal tire reactions are formed not only by the design of suspension but also by the longitudinal tire reactions (circumferential wheel forces), which follow from the wheel torques supplied by the driveline system. A 6×6 vehicle with A-type suspension systems at all three axles exhibits different normal tire reactions at the drive axles during motion even when the static weight distribution is equal.

While much research has focused on improving terrain mobility, energy and fuel efficiency of terrain trucks, only a limited amount of investigation has gone into analysis of power distribution between the driving wheels. Distribution of power among the driving wheels has been shown to have a significant effect on vehicle operating characteristics for a given set of operating conditions and total power supplied to the wheels. Wheel power distribution is largely a function of the design of the driveline power dividing units (PDUs). In this paper, 6×6/6×4 terrain truck models are analyzed with the focus on various combinations of PDUs and suspension systems. While these models were found to have some common features, they demonstrate several different approaches to driveline system design.

Distribution of traction forces among driving wheels is one of the main factors governing the performance of a highway truck during acceleration and braking on varying macro and micro road surface conditions. Comprehension of the interaction between wheels and road surface provides a profound systematic way to simulate a truck's motion and design required components for the optimal performance. The development of electronic technologies has created the pre-conditions necessary to develop systems with controlled parameters. However, to realize the pre-conditions, vehicle dynamics problems have to be formulated and solved for both optimization and control. Many different approaches emerged with the aid of electronics to control the circumferential wheel forces (wheel torque) by restricting wheel slip. A part of such systems has been named as Acceleration Slip Regulation (ASR) and Anti Slip Differentials (ASD).

The dynamics of an AWD vehicle is determined by the interactions between the vehicle's wheels and the tire contact surface. Understanding and controlling these interactions drives the vehicle mobility and energy efficiency. In this paper new issues related to tire slippage control are addressed. The paper analytically demonstrates that two tires on the same axle with the same rotational speeds can have different slippages when the normal reaction and inflation pressure vary due to motion conditions. Hence, a new method is proposed to control the rotational velocity of the wheels in a way that provides the same slippages of the tires by accounting for changes in the normal load and tire inflation pressure. This approach is especially beneficial for vehicles with individual (electric) wheel drives which can be individually controlled by introducing the proposed algorithm for controlling both the vehicle linear velocity and the tire slippages.

To evaluate traction and velocity performance and other operational properties of a vehicle requires data on some tire parameters including the effective rolling radius in the driven mode (no torque on a wheel), the effective radii in the drive mode (torque applied to the wheel), and also the tire longitudinal elasticity. When one evaluates vehicle performance, these parameters are extremely important for linking kinematic parameters (linear velocity and tire slip coefficient) with dynamic parameters (torque and traction net force) of a tired wheel. This paper presents an experimental method to determine the above tire parameters in laboratory facilities. The facilities include Lawrence Technological University's 4x4 vehicle dynamometer with individual control of each of the four wheels, Kistler RoaDyn® wheel force sensors that can measure three forces and three moments on a wheel, and a modern data acquisition system. The experimental data are also presented in the paper.

To develop better performing vehicles, for ground transportation, it is necessary to improve the theory in vehicle dynamics for choosing suitable mass and geometric parameters for highway as well as for off road trucks. A new approach is required for choosing such optimal mass and geometric parameters. The present paper is devoted to this problem. A new method for synthesis of mass and geometric parameters is introduced here. The method allows us to synthesize the parameters in such way as to provide a vehicle with the best transport efficiency under various road surface conditions. Constraints such as limitations on these parameters, vehicle running modes, mass and geometric parameters are included in the model. Furthermore other constraints for vehicle running abilities which are dependent on mass and geometric parameters, as well as an algorithm for synthesizing mass and geometric parameters are also included in the paper for pre-optimization process.