Standard
SPARK ENERGY MEASUREMENT, ALTERNATIVE METHODS
1992-11-01
HISTORICAL
AIR951
Search Results
Standard
Spark Energy Measurement, Alternative Methods
1998-08-01
CURRENT
AIR951A
Parameters to consider and various methods of measuring spark energy of aviation ignition systems.
Standard
SPARK PLUG RATING CALIBRATION
1966-01-01
HISTORICAL
ARP890
Standard
Spark Plug Rating Calibration
1998-08-01
CURRENT
ARP890A
Procedure for obtaining the corrected heat-rating values (indicated mean effective pressure, IMEP) of spark plugs rated in the SAE 17.6 cubic inch rating engine (SAE AS840).
Standard
THE SPARK CALORIMETER
1994-06-01
CURRENT
AIR885
Standard
IGNITION SHIELDING, AIRCRAFT
1996-11-01
CURRENT
AS29
This standard covers two basic types of ignition shielding as follows: Type I - Unfilled Type II - Filled
Standard
HIGH TENSION EXCITER OUTPUT VOLTAGE MEASUREMENT USING CATHODE-RAY OSCILLOSCOPE
1994-06-01
CURRENT
AIR1092
Standard
IGNITION EXCITER OUTPUT VOLTAGE PULSE MEASUREMENT USING A PRESSURIZED BALL GAP
1994-07-01
CURRENT
AIR1090
This report includes a procedure for typical pulse voltage measurement using the pressurized ball gap, calibration procedure, and a description of the pressurized ball gap.
Standard
HIGH VOLTAGE PULSE GENERATOR
1994-07-01
CURRENT
AIR1091
This report covers the use, electro-mechanical description, and accuracy of a pulse generator in the range of 5 to 30 kilovolts and zero to peak voltage time of less than 1.0 microsecond.
Standard
IGNITER CERAMIC ARC RESISTANCE TESTS
1990-08-01
CURRENT
AIR4090
This report describes basic methods, typical results, limitations, and technical variables which may provide some relative performance expectations for different lots of the same material, or comparison characteristics for different materials. This testing alone does not assure satisfactory operation in the engine, i.e., there is not a direct relationship to actual engine performance.
Standard
LOW TENSION SPARK IGNITER SPARKING VOLTAGE TEST
1992-11-01
CURRENT
ARP846
These specifications contain general information pertaining to the sparking voltage parameter of shunted surface gap spark igniters; test equipment circuitry; bill of materials for test equipment; test equipment operation.
Standard
IGNITER, SPARK, AERONAUTICAL ENGINE (LOW TENSION)
1991-05-01
CURRENT
AS803
This specification establishes the qualification and acceptance limits for aeronautical engine low tension spark igniters.
Standard
ELBOW ASSEMBLY - SHIELDED SPARK PLUG - .750-20 THREAD
1992-12-01
CURRENT
ARP572
Standard
QUENCH BOMB SPARK PLUG TEST
1943-11-01
HISTORICAL
ARP159
Standard
LEADS, SHIELDED, DETACHABLE SPARK PLUG
1956-03-15
HISTORICAL
ARP489
This specification establishes the requirements for shielded, detachable high tension spark plug leads for reciprocating engines.
Standard
LEADS, SHIELDED, HIGH TENSION, DETACHABLE SPARK PLUG
1992-12-01
CURRENT
ARP489A
This specification establishes the requirements for shielded, detachable high tension spark plug leads for reciprocating engines.
Standard
SPARK PLUGS, AIRCRAFT ENGINE - 18 MM
1942-03-01
HISTORICAL
AS28
This standard covers two basic types of spark plugs as follows:
Standard
IGNITER, SPARK, AERONAUTICAL ENGINE (HIGH TENSION)
1962-11-01
HISTORICAL
AS692
This specification establishes the qualification and acceptance limits for aeronautical engine high tension spark igniters.
Standard
IGNITER, SPARK, AERONAUTICAL ENGINE (HIGH TENSION)
1992-11-01
CURRENT
AS692A
This specification establishes the performance, qualification, acceptance limits, and identification for aeronautical engine high tension spark igniters.
Standard
GASKET-SPARK IGNITER
1994-07-01
CURRENT
AS475A
