Search Results

Standard

Air Reservoir Capacity Performance Guide—Commercial Vehicles

2002-08-23

HISTORICAL

J1609_200208

This SAE Recommended Practice establishes performance guidelines for the capacity of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies, with GVWRs over 10 000 lb, designed to be used on the highway in commercial operations. NOTE—At time of publication, vehicles complying with this document may not comply with the air reservoir requirements of FMVSS 121.

Standard

AIR RESERVOIR CAPACITY PERFORMANCE GUIDE—COMMERCIAL VEHICLES

1997-07-01

HISTORICAL

J1609_199707

This SAE Recommended Practice establishes performance guidelines for the capacity of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies, with GVWRs over 10 000 lb, designed to be used on the highway in commercial operations.

Standard

Air Reservoir Capacity Performance Guide—Trucks and Buses

2014-10-09

HISTORICAL

J1609_201410

This SAE Recommended Practice establishes performance guidelines of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway. NOTE: Compliance with this document does not guarantee compliance with the air reservoir requirements of FMVSS 121.

Standard

Test Procedure for Air Reservoir Capacity - Truck and Bus

2014-02-05

HISTORICAL

J1911_201402

This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles.

Standard

AIR BRAKE VALVE - PERFORMANCE REQUIREMENTS

1986-07-01

HISTORICAL

J1410_198607

This practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include:

Standard

Air Brake Valves Test Procedure

2016-07-20

HISTORICAL

J1409_201607

This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing

Standard

Air Brake Valves Test Procedure

2011-02-04

HISTORICAL

J1409_201102

This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing

Standard

Air Brake Valves Test Procedure

1998-09-01

HISTORICAL

J1409_199809

This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Characteristics b Leakage Measurement c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity

Standard

Air Brake Valve—Performance Requirements

1998-09-01

HISTORICAL

J1410_199809

This SAE Recommended Practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include:

Standard

AIR BRAKE VALVE—PERFORMANCE REQUIREMENTS

1986-10-01

HISTORICAL

J1410_198610

This practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAEJ1409. The performance requirements will include:

Standard

Air Brake Valve—Performance Requirements

2004-05-10

HISTORICAL

J1410_200405

This SAE Recommended Practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input - Output Performance b Leakage Characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve - Performance Requirements

2020-12-18

CURRENT

J1410_202012

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve - Performance Requirements

2011-02-18

HISTORICAL

J1410_201102

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve - Performance Requirements

2016-07-20

HISTORICAL

J1410_201607

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve Input-Output Characteristic Requirements

2016-06-17

CURRENT

J1861_201606

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Air Brake Valve Input-Output Characteristic Requirements

2007-01-19

HISTORICAL

J1861_200701

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Air Brake Valve Input-Output Characteristic Requirements

2011-09-12

HISTORICAL

J1861_201109

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Air Brake Valve Input-Output Characteristic Requirements

2001-09-13

HISTORICAL

J1861_200109

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force b Pressure differential (input-output)

Standard

Test Procedures for Determining Air Brake Valve Input-Output Characteristics

2011-05-16

HISTORICAL

J1859_201105

This SAE Recommended Practice establishes uniform test procedures for determining input-output characteristics for those pilot-operated and mechanically actuated, modulating-type valves and through-type valves used in the service brake control system.

Standard

Test Procedures for Determining Air Brake Valve Input-Output Characteristics

2016-06-14

CURRENT

J1859_201606

This SAE Recommended Practice establishes uniform test procedures for determining input-output characteristics for those pilot-operated and mechanically actuated, modulating-type valves and through-type valves used in the service brake control system.