Refine Your Search

Date

Date

Topic

Topic

Research and development Tests and Testing Fasteners Committee Nanomaterials Manufacturing Nanotechnology

Search Results

Viewing 1 to 20 of 138
123Next >Last >>
Sort by published
Standard

TEST METHODS FOR METRIC THREADED FASTENERS
1978-03-01
HISTORICAL
J1216_197803
This standard establishes procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners.
Standard

Test Methods for Metric Threaded Fasteners
1999-07-20
CURRENT
J1216_199907
This standard establishes procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners. Property requirements and the applicable tests for their determination are specified in individual product standards. In those instances where the testing requirements are unique or at variance with these standard procedures, the product standard shall specify the controlling testing requirements. This standard describes mechanical tests for determining the following properties: For externally threaded fasteners: Product hardness (Section 4.1) Surface hardness (Section 4.2) Proof load (Section 4.3) Yield strength (Section 4.4) Axial tensile strength (Section 4.5) Wedge tensile strength (Section 4.6) Elongation (Section 4.7) Reduction of area (Section 4.7) For internally threaded fasteners: Product hardness (Section 5.1) Proof load (Section 5.2)
Standard

LOCK WASHERS
1974-02-01
HISTORICAL
J489B_197402
This SAE Standard covers the complete dimensional and general specifications, including physical properties and methods of testing, for those types of lock washers intended for use in automotive and general industrial applications.
Standard

Torque-Tension Tightening for Metric Series Fasteners
2022-03-29
CURRENT
J1701M_202203
This SAE Information Report is provided as an advisory guide. Individual application discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. The document covers a number of the variables in the torque-tension relationship: friction, materials, temperature, humidity, fastener and mating part finishes, surfaces, and the kind of tightening tools or equipment used. Also described in this document is the torque management required to achieve satisfactory fastened joint tightening. This guide is limited in application to clearance fit threads, such as the common 6g/6H class of fit. Other thread types including interference fit, mechanical locking, prevailing torque, or forms other than ISO-metric may apply to some aspects of this standard but are not specifically covered.
Standard

Torque-Tension Tightening for Metric Series Fasteners
2017-11-08
HISTORICAL
J1701M_201711
This SAE Information Report is provided as an advisory guide. Individual application discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. The document covers a number of the variables in the torque-tension relationship: friction, materials, temperature, humidity, fastener and mating part finishes, surfaces, and the kind of tightening tools or equipment used. Also described in this document is the torque management required to achieve satisfactory fastened joint tightening. This guide is limited in application to clearance fit threads, such as the common 6g/6H class of fit. Other thread types including interference fit, mechanical locking, prevailing torque, or forms other than ISO-Metric may apply to some aspects of this standard but are not specifically covered.
Standard

TORQUE-TENSION TIGHTENING FOR METRIC SERIES FASTENERS
1996-07-01
HISTORICAL
J1701M_199607
This SAE Information Report is provided as an advisory guide. Individual application discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. The document covers the variables in the torque-tension relationship: friction, materials, temperature, humidity, fastener and mating part finishes, surfaces, and the kind of wrenching employed. Also described in this document is the torque management required to achieve correct fastener joint tightening. The thread fit of fasteners must be in accordance with Class 6g for external and 6H for internal metric threads.
Standard

STEEL STAMPED NUTS OF ONE PITCH THREAD DESIGN—METRIC SERIES
1996-08-01
HISTORICAL
J1053M_199608
Included herein are general, dimensional, and performance specifications for those types, styles, and sizes of stamped nuts of one pitch thread design recognized as SAE standard. These nuts are intended for general use where the engagement of a single thread on the mating screw or unthreaded stud is considered adequate for the application. For the inch equivalent of this document, see SAE J1053.
Standard

Guide for Rivet Selection and Design Consideration
2013-04-16
HISTORICAL
J492_201304
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

Guide for Rivet Selection and Design Consideration
2005-06-30
HISTORICAL
J492_200506
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

Guide for Rivet Selection and Design Consideration
2016-11-23
CURRENT
J492_201611
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

Thread Rolling Screws
2012-07-05
CURRENT
J81_201207
This SAE Standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities beyond those normally expected of other standard types of tapping screws.) NOTE—The performance requirements covered in this document apply only to the combination of laboratory conditions described in the testing procedures. If other conditions are encountered in an actual service application (such as different materials, thicknesses, hole sizes, etc.), values shown herein for drive torque, torque-to-clamp load, and proof torque may require adjustment.
Standard

Thread Rolling Screws
1997-09-01
HISTORICAL
J81_199709
This SAE Standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities beyond those normally expected of other standard types of tapping screws.)
Standard

THREAD ROLLING SCREWS
1972-07-01
HISTORICAL
J81_197207
This standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that “thread rolling” screws have performance capabilities beyond those normally expected of other standard types of tapping screws.) Note: The performance requirements covered in this standard apply only to the combination of laboratory conditions described in the testing procedures. If other conditions are encountered in an actual service application (such as different materials, thicknesses, hole sizes, etc.), values shown herein for drive torque, torque-to-clamp load, and proof torque may require adjustment.
123Next >Last >>
X