Search Results

Standard

Unauthorized Starting or Movement of Machines

2012-05-02

CURRENT

J1083_201205

This SAE Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this recommended practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this recommended practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft.

Standard

STEERING FOR OFF-ROAD, RUBBER-TIRED MACHINES

1994-02-01

HISTORICAL

J1511_199402

This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a Earthmoving b Other than earthmoving: except rollers and compactors c General purpose industrial d Forestry e Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a Manual steering b Power-assisted steering c Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.

Standard

TIRE GUARDS FOR PROTECTION OF OPERATOR OF EARTHMOVING HAULAGE MACHINES

1978-04-01

HISTORICAL

J321B_197804

This recommended practice establishes a minimum zone of protection for the operator of the machine and certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h (15 mph). Earthmoving machines covered by this recommended practice are dumpers, and tractor-scrapers as identified in SAE J1057a (June, 1975).

Standard

TIRE GUARDS FOR PROTECTION OF OPERATOR OF EARTHMOVING HAULAGE MACHINES

1978-04-01

HISTORICAL

J321_197804

This recommended practice establishes a minimum zone of protection for the operator of the machine and certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h (15 mph). Earthmoving machines covered by this recommended practice are dumpers, and tractor-scrapers as identified in SAE J1057a (June, 1975).

Standard

Tire Guards for Operator Protection—Earthmoving Haulage Machines

1999-05-24

HISTORICAL

J321_199905

This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165.

Standard

FENDERS FOR PNEUMATIC-TIRED EARTHMOVING HAULAGE EQUIPMENT

1967-11-01

HISTORICAL

J321_196711

This recommended practice establishes uniform tire coverage procedures and certain minimum structural requirements for fenders on all wheels of pneumatic-tired earthmoving haulage equipment wherever specified maximum travel speeds exceed 15 mph. Examples of this equipment are heavy construction units such as trucks, scrapers, front-end loaders, tractors, tractor-dozers, pushers, and trailing units.

Standard

Tire Guards for Operator Protection--Earthmoving Haulage Machines

2008-04-14

CURRENT

J321_200804

This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165.

Standard

Steering Frame Lock for Articulated Loaders and Tractors

2002-12-20

HISTORICAL

J276_200212

This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1981-06-01

HISTORICAL

J276_198106

Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1992-11-01

HISTORICAL

J276_199211

This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J1057, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.

Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS

1986-05-01

HISTORICAL

J276_198605

Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).

Standard

LIFT ARM SUPPORT DEVICES FOR LOADERS

1991-08-01

HISTORICAL

J38_199108

This SAE Standard provides the acceptance criteria for a lift arm support device to prevent lowering of the loader lift arms when the lift arms are required to be held in an elevated position for maintenance. It establishes structural, mounting, and test requirements for a lift arm support device for loaders as defined in SAE J1057 JUN81.

Standard

LIFT ARM SAFETY DEVICE FOR LOADERS

1977-06-01

HISTORICAL

J38_197706

This standard establishes structural, mounting, and test requirements for a lift arm safety device for loaders as defined in SAE J1057a.

Standard

Personnel Protection - Compact Tool Carriers

2021-07-07

CURRENT

J2752_202107

This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.

Standard

Nomenclature—Industrial and Agricultural Mowers

2004-05-10

HISTORICAL

J990_200405

Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.

Standard

NOMENCLATURE—INDUSTRIAL AND AGRICULTURAL MOWERS

1987-03-01

HISTORICAL

J990_198703

Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.

Standard

Nomenclature—Industrial and Agricultural Mowers

2009-05-11

HISTORICAL

J990_200905

Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.

Standard

NOMENCLATURE--INDUSTRIAL MOWERS

1986-05-01

HISTORICAL

J990_198605

Standard

Nomenclature - Industrial and Agricultural Mowers

2020-11-03

CURRENT

J990_202011

Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.

Standard

Nomenclature—Industrial and Agricultural Mowers

2014-06-04

HISTORICAL

J990_201406

Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.