Search Results

This document covers the basis of, and test procedure for, an overspeed landing test on aircraft tires with rated speeds of 190 mph (306 km/h) and above. The conditions requiring an overspeed test, alternatives, test requirements and pass/fail criteria are addressed.

This document covers the basis of, and test procedure for, an overspeed landing test on aircraft tires with rated speeds of 190 mph (306 km/h) and above. The conditions requiring an overspeed test, alternatives, test requirements and pass/fail criteria are addressed.

This document covers the basis of, and test procedure for, an overspeed landing test on aircraft tires with rated speeds of 190 mph (306 km/h) and above. The conditions requiring an overspeed test, alternatives, test requirements and pass/fail criteria are addressed.

This document points to a standard ASTM test method utilized by land vehicle manufacturers and others to provide the electrical resistance of a tire. It is desired that this ASTM test method is also used with aircraft tires. This method will assure that more accurate repeatable data is provided to those in the aerospace industry who request it.

This SAE Aerospace Information Report (AIR), is intended to provide a continuum on historical development of aircraft tires.

This SAE Aerospace Information Report (AIR), is intended to provide a continuum on historical development of aircraft tires.

This SAE Aerospace Information Report (AIR), is intended to provide a continuum on historical development of aircraft tires.

This specification covers the recommended design, construction, performance and testing requirements for aircraft wheel inflation valves incorporating an inflation pressure gauge which are mounted on the aircraft wheel. These valve/gauge assemblies should be appropriate for use on all aircraft types supported by tubeless tire/wheel assemblies.

This specification covers the recommended design, construction, performance and testing requirements for aircraft wheel inflation valves incorporating an inflation pressure gauge which are mounted on the aircraft wheel. These valve/gauge assemblies should be appropriate for use on all aircraft types supported by tubeless tire/wheel assemblies.

The purpose of this SAE Aerospace Recommended Practice (ARP) is to establish guidelines for the measurement of static and dynamic characteristic properties of aircraft tires. It is intended as a general guide toward standard practice, but may be subject to frequent changes to keep pace with experience and technical advances. This revision (Revision A) is also intended to provide suggested guidelines for synthesizing tire dynamic data necessary for landing gear shimmy analyses.

The purpose of this SAE Aerospace Recommended Practice (ARP) is to establish guidelines for the measurement of static and dynamic characteristic properties of aircraft tires. It is intended as a general guide toward standard practice, but may be subject to frequent changes to keep pace with experience and technical advances. It replaces the previous SAE document, AIR1380.

This SAE Aerospace Recommended Practice (ARP) sets forth criteria for the selection, inspection, retread and repair of worn civil aircraft tires, and the means to verify that the retreaded tire is suitable for continued service. This document is applicable to both bias ply and radial aircraft tires qualified subsequent to the adoption of this document.

This SAE Aerospace Recommended Practice (ARP) sets forth criteria for the selection, inspection, retread and repair of worn civil aircraft tires, and the means to verify that the retreaded tire is suitable for continued service. This document is applicable to both bias ply and radial aircraft tires qualified subsequent to the adoption of this document.

This SAE Aerospace Information Report (AIR) describes the current process for performing comparative wear testing on aircraft tires in a laboratory environment. This technique is applicable to both radial and bias tires, and is pertinent for all aircraft tire sizes. This AIR describes a technique based upon “wear” energy. In this technique, side wear energy and drag wear energy are computed as the tire is run through a prescribed test program. The specifics that drive the test setup conditions are discussed in Sections 4 through 7. In general, the technique follows this process: A test profile is developed from measured mechanical property data of the tires under study. Each tire is repeatedly run to the test profile until it is worn to the maximum wear limit (MWL). Several tires, typically 5 to 10, of each tire design are tested. Wear energy is computed for each test cycle and then summed to determine total absorbed wear energy. An index is calculated for each tire design.

The performance of an aircraft tire/wheel assembly in service is dependent on the geometrical fit, load distribution, and performance at the tire/wheel interface while rolling. This document focuses on the tire-to-wheel circumferential movement for a new tubeless tire.

The performance of an aircraft tire/wheel assembly in service is dependent on the geometrical fit, load distribution, and performance at the tire/wheel interface while rolling. This document focuses on the tire-to-wheel circumferential movement for a new tubeless tire.

This SAE Aerospace Standard (AS) establishes requirements for manufacturing, testing, identification, packaging, and quality of tubes for application in commercial and military aircraft wheel assemblies.

This SAE Aerospace Standard (AS) establishes requirements for manufacturing, testing, identification, packaging, and quality of tubes for application in commercial and military aircraft wheel assemblies.

This SAE Aerospace Standard (AS) establishes requirements for manufacturing, testing, identification, packaging, and quality of tubes for application in commercial and military aircraft wheel assemblies.

This SAE Aerospace Standard (AS) establishes requirements for manufacturing, testing, identification, packaging, and quality of tubes for application in commercial and military aircraft wheel assemblies.