Criteria

Text:
Display:

Results

Viewing 1 to 30 of 259
2017-03-16
WIP Standard
AMS1388B
This specification covers two types of thickened, water base temporary coating remover in the form of an alkaline liquid. This product has been used typically for removing temporary coatings used for protection of aircraft skins from exposure to processing damage, but usage is not limited to such applications.
2015-05-06
WIP Standard
AMS1385B
This specification covers a solvent-based compound in the form of a liquid. This compound has been used typically for removal of carbonaceous soils and paint from aircraft turbine engine parts by immersion in liquid at elevated temperature, but usage is not limited to such applications. This compound should not be used on steel parts having hardness of 40 HRC or over.
2013-02-25
WIP Standard
AMS1387B
This specification covers an anti-galling compound remover in the form of a water-soluble powder, a concentrated liquid for dilution with water, or a ready-to-use liquid. This remover has been used typically for removal of anti-galling compounds from turbine engine components by immersion at room temperature in a solution of the remover or ready-to-use liquid, but usage is not limited to such applications. This remover shall not be used on steel parts having hardness of 40 HRC or over.
2011-03-16
WIP Standard
AMS1386B
This specification covers a silicone-rubber-remover compound in liquid form of a liquid supplied as a ready-to-use product. This compound has been used typically for removal of silicone rubber adhesive/sealant materials from turbine engine components by immersion at room temperature, but usage is not limited to such applications. This compound shall not be used on steel parts having hardness of 40 HRC or over.
2008-01-23
WIP Standard
AMS1376C
This specification covers a paint remover in the form of a liquid. This product has been used typically for removing amine-cured, epoxy coating systems from aluminum alloys, but usage is not limited to such applications. This product is not intended for use on aircraft engine components or other high strength steel parts with hardness of 48 HRC or higher.
HISTORICAL
1978-01-01
Standard
AMS1376
This specification covers an acid-type, thickened paint remover in the form of a liquid.
2013-09-04
WIP Standard
AMS1378B
This specification covers a carbon soil and paint remover compound in the form of a liquid. Primarily for removal of carbonaceous soils and paint from aircraft turbine engine parts by immersing the parts in liquid at room temperature.
2011-03-16
WIP Standard
AMS1374B
This specification covers two types of paint remover in the form of a liquid. This product has been used typically as a stripper for polyurethane/ epoxy painted aircraft wheels and landing gear, but usage is not limited to such applications.
2017-05-01
WIP Standard
AMS1539A
This specification covers a terpene base solvent cleaner in the form of a liquid, which forms a transient emulsion with water. The cleaner has been used typically for the removal of residual soldering flux and polar and nonpolar contaminants from component populated circuit boards subsequent to soldering operations, but usage is not limited to such applications. The cleaner is used in in-line and batch cleaning systems with provisions for spray-under- immersion, ultrasonic immersion or immersion-spin cleaning, and with provisions for a water rinse.
2017-03-27
WIP Standard
AMS1523C
This specification covers a thickened, water-base, type cleaner in the form of a gel.
HISTORICAL
1977-07-01
Standard
AMS1475
This specification covers a biodegradable, formaldehyde-base material, containing additives, in the form of a concentrated liquid.
2008-01-23
WIP Standard
AMS3077A
This specification covers a ready-mixed thixotropic compound in the form of a stable film-forming compound suitable for application by brushing or spraying. To provide long-term protection of aircraft structures. Compound covered by this specification is classified as follows: Class I - Undyed; Class II - Dyed. Unless a specific class is specified, either Class I or Class II may be supplied.
HISTORICAL
1979-10-15
Standard
AMS1775
This specification covers upholstery fabrics woven from nylon and treated for fire retardation.
2008-01-23
WIP Standard
AMSC19853A
This specification covers requirements for the acquisition of two types and two classes of material that will remove or loosen carbon from components of internal combustion engines and compressor sections of jet engines.
HISTORICAL
1978-07-01
Standard
AMS1320
This specification covers a solvent-type remover for decal adhesives in the form of a liquid.
2017-03-16
WIP Standard
AMS1320B
This specification covers a solvent-type remover in the form of a liquid. Primarily for removing decal adhesive residue from painted surfaces, metal, plastics, and interior decor of aircraft.
HISTORICAL
1977-07-01
Standard
AMS1500
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of April 1994. It is recommended, therefore, that this specification not be specified for new designs.
HISTORICAL
1977-07-01
Standard
AMS1525
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of January 1995. It is recommended, therefore, that this specification not be specified for new designs.
2013-09-04
WIP Standard
AMS1370B
This specification covers a concentrated rust removing compound in the form of a liquid to be diluted with water for use either at ambient or elevated temperature.
2015-05-06
WIP Standard
AMS1371A
This specification covers a rust removing compound in the form of a solid, generally powdered, to be dissolved in water, and heated. This compound has been used typically for the removal of oxides from ferrous components during manufacture or at overhaul, but usage is not limited to such applications. This compound product may be acidic, but is usually highly alkaline and is not suitable for processing aluminum components. Avoid mixed metals during processing.
HISTORICAL
1978-10-01
Standard
AMS1451
This specification covers disinfectants or chemicals for use in disinfecting aircraft after carrying livestock.
2017-03-16
WIP Standard
AMS1451C
This specification covers disinfectants or chemicals for use in disinfecting aircraft after carrying livestock. This material has been used typically as a disinfectant for aircraft where required by the U. S. Department of Agriculture, the World Health Organization, or member states, but usage is not limited to such applications.
HISTORICAL
1978-01-01
Standard
AMS1532A
This specification covers an emulsion-type cleaner in the form of a liquid.
HISTORICAL
1978-01-01
Standard
AMS1532
This specification covers an emulsion-type cleaner in the form of a liquid.
HISTORICAL
1977-07-01
Standard
AMS1528
This specification covers an emulsion-type, low-foaming cleaner in the form of a liquid.
HISTORICAL
1977-07-01
Standard
AMS1527
This specification covers a water-miscible, foam-on, pressure spraying cleaner in the form of a liquid.
2017-03-27
WIP Standard
AMS1528E
This specification covers an emulsion-type, low-foaming cleaner in the form of a liquid.
HISTORICAL
1977-07-01
Standard
AMS1529
This specification covers an emulsion-type, foam-on, pressure-spray cleaner in the form of a liquid.
2015-05-06
WIP Standard
AMS1540D
This specification covers a water base cleaner in the form of a liquid.
HISTORICAL
1978-01-01
Standard
AMS1626
This specification covers materials in the form of a liquid used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
Viewing 1 to 30 of 259