Criteria

Text:
Display:

Results

Viewing 1 to 30 of 3498
2010-06-03
WIP Standard
AIR6444
The scope of this document is limited to the discussion of the performance life of aerospace hose assemblies. By definition, hose assembly life may only be evaluated on the basis of design and application. This means the only meaningful evaluation can be conducted on the basis of hose assembly part number and its intended application.
HISTORICAL
1991-10-01
Standard
AMS3389C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
CURRENT
1993-10-01
Standard
AMS3389D
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1991-10-01
Standard
AMS3388C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3388A
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1961-07-01
Standard
AMS3389A
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
HISTORICAL
1958-08-01
Standard
AMS3389
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
CURRENT
1993-10-01
Standard
AMS3388D
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3388
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1958-08-01
Standard
AMS3386
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
HISTORICAL
1961-07-01
Standard
AMS3386A
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
CURRENT
1993-10-01
Standard
AMS3386D
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.
CURRENT
1993-10-01
Standard
AMS3387E
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing hose with textile reinforcement.
HISTORICAL
1991-10-01
Standard
AMS3386C
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing type hose.
HISTORICAL
1960-01-01
Standard
AMS3380
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
HISTORICAL
1974-12-01
Standard
AMS3380B
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
HISTORICAL
1965-09-01
Standard
AMS3380A
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
CURRENT
1991-04-01
Standard
AMS3380D
This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.
HISTORICAL
1983-07-01
Standard
AMS3380C
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
2013-06-04
WIP Standard
AS1582G
Revise effective date for transition of OEM-QPL to PRI-QPL
2013-06-04
WIP Standard
AS1581E
Revise effective date for transition of OEM-QPLs to PRI-QPLs
2012-02-16
WIP Standard
AS1709B
This specification covers the requirements for aircraft, hydraulic, self sealing, quick disconnect couplings, for use in type II hydraulic systems (-65 ° F to +275 ° F temperature range) as defined by MIL-H-5440.
2017-03-29
WIP Standard
AS1299D
No scope available.
2016-02-23
WIP Standard
AS1472B
This specification covers three types of lightweight, low pressure, wire and/or fabric reinforced hose assemblies primarily for use in aircraft potable water systems.
Viewing 1 to 30 of 3498

Filter

  • Range:
    to:
  • Year: