Search Results

Back in the first two decades of automobile development, electric propulsion was a serious competitor for the internal combustion engine. Electrically-propelled vehicles, however, soon proved unable to satisfy users' increasing performance demands in terms of range, acceleration, top speed and hill-climbing, together with such factors as operating life, initial purchase price, running costs and reliability. Engineers investigating electric propulsion today face precisely the same unwelcome legacy as their predecessors, despite many and varied attempts in the meantime to improve the components of the electric vehicle's drive system (energy storage device, motors, controller). Progress in battery development, particularly in the case of the NaS system, has nevertheless enabled us at least partly to overcome the previous problems associated with electric drive systems, though it cannot be claimed that all obstacles to its commercial application have been eliminated as yet.

Over the next decades to come, fossil fuel powered Internal Combustion Engines (ICE) will still constitute the major powertrains for land transport. Therefore, their impact on the global and local pollution and on the use of natural resources should be minimized. To this end, an extensive fundamental and practical study was performed to evaluate the potential benefits of simultaneously co-optimizing the system fuel-and-engine using diesel as an example. It will be clearly shown that the still unused co-optimizing of the system fuel-and-engine (including advanced exhaust after-treatment) as a single entity is a must for enabling cleaner future road transport by cleaner fuels since there are large, still unexploited potentials for improvements in road fuels which will provide major reductions in pollutant emissions both in vehicles already in the field and even more so in future dedicated vehicles.

In order to avoid the undesired side effect of water condensation occurring under special environment conditions in modern xenon lamps several modifications of the serial automotive headlamps were suggested. The suggestions consist of a) desired leakage in the cover, b) anti-fog coating and c) integrated ventilation tube. These strategies were tested using two types of serial head lamps applying a condensation cycle for the simulation of the urban condition. During this condensation cycle the thermodynamic parameters, like relative air humidity and temperature, were measured at different places in the head lamp and as function of time. The modification with the integrated ventilation tube is able to improve the serial head lamp significantly. The improvement in terms of water condensation for the modification using anti-fog coating depends from the number of cooling cycles.

This paper is the third in the series of documents designed to record the progress on the SAE Plug-in Electric Vehicle (PEV) communication task force. The initial paper (2010-01-0837) introduced utility communications (J2836/1™ & J2847/1) and how the SAE task force interfaced with other organizations. The second paper (2011-01-0866) focused on the next steps of the utility requirements and added DC charging (J2836/2™ & J2847/2) along with initial effort for Reverse Power Flow (J2836/3™ & J2847/3). This paper continues with the following: 1. Completion of DC charging's 1st step publication of J2836/2™ & J2847/2. 2. Completion of 1st step of communication requirements as it relates to PowerLine Carrier (PLC) captured in J2931/1. This leads to testing of PLC products for Utility and DC charging messages using EPRI's test plan and schedule. 3. Progress for PEV communications interoperability in J2953/1.

Automatic Crash Notification (ACN) technology provides an opportunity to rapidly transmit crash characteristics to emergency care providers in order to improve timeliness and quality of care provided to occupants in the post crash phase. This study evaluated the relative value of crash attributes in providing useful information to assist in the identification of crashes where occupants may be seriously injured. This identification includes an indication of whether a crash is likely to require a level of emergency response with higher priority than is needed for most crashes reported by ACN Systems. The ability to predict serious injury using groupings of variables has been determined. In this way, the consequence of not transmitting each variable can be estimated. In addition, the incremental benefit of voice communication is shown.

BMW has undertaken a comprehensive program including laboratory simulation rig tests, engine dynamometer and fleet evaluations to evaluate the influence of mechanical and fuel variables on induction system deposits in modern port fuel injected (PFI) spark ignition engines. The primary focus of the program has been the deposit buildup on intake valves (IVD) and associated driveability impacts. Initial investigations of engine modifications yielded only marginal improvements relative to deposit build-up and, therefore this led to investigations of the effect of gasolines and additives. Fuel quality, type, quantity of additives and alcohol content have all been found to be major contributing factors to intake valve deposition. In addition, intake valve deposit weight has been directly related to warm-up phase driveability concerns using a newly developed driveability procedure.

The idea of keeping a vehicle safe and secure throughout its whole life cycle, as well as having the opportunity to add functionality after initial delivery, is the key motivation behind automotive software updates. Today, safety or security issues that appear after vehicle delivery need to be resolved by starting a recall campaign. These campaigns require the vehicle user to visit a car repair workshop to get an update. Over The Air (OTA) software updates, being location-independent, can pave the way for higher update frequencies and more efficiency regarding customer satisfaction, resource consumption as well as safety and security. In this paper we analyze requirements for OTA software updates phrased in various standards and regulations as well as in existing development and type approval processes. Prevailing challenges for OTA updates are extracted to identify necessary activities and artifacts within the procedure.

This paper summarises the potential for the use of a gasoline direct injection engine for fuel economy benefits. Various engine technologies are compared for the greatest reduction in fuel consumption at the steady state point 2000rpm/2 bar. This is an important driving point in the EU cycle. The direct injection engine when used in an unthrottled lean stratified mode shows the greatest potential. Calculations show a fuel economy of a middle class vehicle can be increased by 12% using a DI over the EU cycle. The catalytic aftertreatment system is discussed and it is concluded that a close coupled pre-catalyst, a NOx trap and double injection are a good overall solution for the minimisation of exhaust gas emissions from a DI engine.

To reduce vehicle development cycles it is necessary to perform numerical durability analyses in an early development phase. Typically there is no physical prototype available at that time hence there are no measured data, either from the proving ground or from test rigs. This paper presents an alternative method to predict the required loads. Using Multi-Body Simulation (MBS), the loads prediction process is performed for an unconstrained vehicle, which means that vehicle body position and orientation are allowed to change. Of particular interest are the time series of the loads acting at components of the front-and the rear-suspension, as well as on the body structure of the vehicle. For the loads prediction BMW uses the so called Hybrid-Road-Approach developed by LMS. After an initial pilot project demonstrating that approach's feasibility and potential, the project presented below is the first run of that approach by BMW in their productive environment.