Search Results

A high temperature and no oxygen atmosphere fuel reforming has been proposed for the purpose of exergy saving by theoretical analyzing the detailed exergy loss events of combustion process, the correctness and feasibility of this fuel reforming have been verified through experiments. The exergy behaviors of high temperature and no oxygen atmosphere fuel reforming have been extensively studied, and many benefits had been observed including: (1) simplifying the reforming device where catalysts are not necessary; (2) improving the total chemical exergy while effectively converting large moleculae to small moleculae; (3) improving the mixture’s ratio of specific heat that can promote work-extraction; and (4) lengthening the ignition delay that buys time for better mixing process. All of these benefits are conducive to a better organized HCCI combustion that may improve the engine second law efficiency.

To determine the vehicle chassis requirements, wheel force transducer (WFT) have been the best option when it is being used in targeting customer correlation or determining the effective use of the proving ground. However, using wheel force transducer in customer correlation fleet test is often unfeasible due to the huge cost and low practicability. As a result, engineers have to choose other transducer measures. This paper describes an effective approach of wheel force prediction by using the frequency response function (FRF) model of vehicle dynamic system. A vehicle system linear modelling technique is used. For the system identification of FRF, the acceleration and wheel force time history data, as system input and output, are collected from an instrumented passenger car as it traverses in different real-world proving ground surfaces. The obtained FRF represents the complex suspension mechanical model. Once the FRF is calculated, the predicted force signal can be implemented.

The two-wheeler is a vehicle that runs on two wheels, which is classified as motorcycle, electric-bicycle, and bicycle in this research. China has the largest number of two-wheelers and relevant accidents in the world. The two-wheeler riders have a high level of vulnerability, creating a significant necessity to better understand the characteristics according to the road-user group. The objective of this paper is to study the characteristics and analyze the causes of two-wheeler accidents in China using the CIDAS (China In-Depth Accident Study) Database. 2012 cases of two-wheeler accidents with riders injured or dead were collected from the CIDAS Database from 5 cities (Changchun, Beijing, Weihai, Ningbo and Foshan) in China over a period of 5 years (2011.07-2016.06).

With the development of vehicle technologies, vehicle safety is much better than before, many companies put research focus on harder accident scenarios. The 25% overlapping collision is considered as one type of most dangerous collision, this paper study this type accidents base on CIDAS database. Paper showed 7 scenarios appeared frequency in China, 11, 12, 1 o’clock are main impact direction. High way and freeway are the main places, and the head, thorax and lower extremities were the main sites of injury.

As automobiles are gradually transforming from independent mechanical units to network nodes with intelligent and networked functions, the functions and performance evaluation of intelligent vehicles is facing the new challenges. At present, China has initially classified the level of intelligent vehicles on the basis of SAE, but has not yet formed a scientific, rigorous and comprehensive evaluation system. Therefore, this paper proposes the detailed intelligent evaluation ideas of intelligent vehicles in different levels from 0 to 5 and sets up a "Trinity" evaluation system covering professional evaluation, practical evaluation and market evaluation. Then, with the development progress of intelligent vehicles, we will set up the hierarchical structure of evaluation indicators basing on automated intelligence and connected intelligence.

In this paper, it was researched the degradation characteristics of catalytic performance of three kinds of DPFs (C1, C2 and C3, with precious metal concentrations being 15, 25 and 35 g/ft3 respectively) after diesel truck aging. It is found out that the crystallinity of three kinds of DPF samples (Used) in full vehicle aging was higher than that of fresh samples (Fresh) and aged samples (Aged) in the laboratory. Compared with Fresh samples, the concentration of Pt atom in precious metal on the surface of Aged and Used samples tends to decrease in most cases. Activities to CO and C3H8 of Aged and Used samples of three kinds of DPFs had all been degraded, and activity degradation showed a substantial correlation with concentration reduction rate of precious metal on the carrier surface. NO2 productivity of Used samples all rose. Crystallinity of DPF samples after full vehicle aging in Inlet, Middle and Outlet areas successively increased.

Electric vehicles are considered as one of the most popular way to decrease the consumption of petroleum resources and reduce environmental pollutions. Motor control system is one of the most important part of electric vehicles. It includes power supply module, IGBT driver, digital signal processing (DSP) controller, protection adjustment module, and resolver to digital convertor. To implement the control strategies on motor control system, a lot of practical aspects need to be taken into accounts. It includes setup of the initial excitation current, consistency of current between motor and program code, over-modulation, field weakening control, current protection, and so on. In this paper, an induction motor control system for electric vehicles is developed based on DSP. The control strategy is based on the field-oriented control (FOC) and space vector pulse width modulation (SVPWM).

Battery state estimation is one of the most important decision parameters for lithium battery energy management. It plays an important role in improving battery energy utilization, ensuring battery safety and enhancing system reliability. This paper is proposed to provide a dynamic correction of SOC in the full working condition, including static condition and dynamic condition. Based on the Coulomb-counting method, the current SOC value of the battery is calculated. Under the static conditions, the open circuit voltage of the battery is used to directly collect the initial SOC. Under the dynamic working conditions, the open circuit voltage of the battery is estimated by the sliding mode observer. Based on the deviation between the calculated and estimated values of the open circuit voltage, the current coefficient of the Coulomb-counting method is dynamically corrected by PI strategy.

Pure electric vehicles are recognized as one of the most important new energy vehicle types to meet the increasingly stringent standards in energy saving and environment protection. To meet the control demands, China Automotive Technology & Research Center(CATARC) plan to develop an advanced Vehicle Control Platform(VCP) for pure electric vehicles. The developed VCP is well structured on both hardware and software and can be adapted to different pure electric vehicles easily. This paper describes the design of the hardware, the software architecture, the base software and the control strategy applied in the VCP in detail. A matching method is proposed to configure the VCP to a real VCU for the specific application by modifying the hardware channel definition and the control parameters. The paper shows successful application of the VCP on several types of pure electric vehicles.

Battery management system (BMS) is the core component of the new energy vehicle battery system. With the increase of energy density of new energy vehicle battery, its control algorithm becomes more and more complex, and the work of the battery management system will be heavier. In order to solve the limits, the hardware, software and control strategy model of battery management system are developed based on AURIX multi-core microcontroller. The microprocessor control unit is developed by using dual-core chip, which meets the functional safety requirements. Dual-core processing of control strategy and individual information acquisition are realized, and the processing efficiency is improved. A four-tier software architecture of battery management system is developed to handle the Dual-core processing. The graphical development of battery management system strategy model is realized by using MATLAB / Simulink.

In China, nearly 25% of traffic fatalities are pedestrians. To avoid those fatalities in the future, rapid development of countermeasures within both passive and active safety is under way, one of which is autonomous braking to avoid pedestrian crashes. The objective of this work was to describe typical accident scenarios for pedestrian accidents in China. In-depth accident analysis was conducted to support development of test procedures for assessing Autonomous Emergency Braking (AEB) systems. Beyond that, this study also aims for estimating the mitigation of potential crash severity by AEB systems. The China In-depth Accident Study (CIDAS) database was searched from 2011 to 2014 for pedestrian accidents. A total of 358 pedestrian accidents were collected from the on-site in-depth investigation in the first phase of CIDAS project (2011-2014).

Currently, there are no specific standards on electromagnetic compatibility (EMC) test for wireless charging system of electric vehicles (EVs). However, the EMC test items have been summarized in some international standards. And the national standard is under developing. In order to support the formulation of corresponding national standards and regulations, promote the rapid development of EVs industry and support the implementation of the national strategy of new energy vehicles (NEVs) and intelligent network vehicle, we carry out the EMC test for wireless charging systems. In this paper, the wireless charging system of EVs is taken as the research object, which can also been called equipment under test (EUT). Firstly, an introduction of the research status was summarized. And then, the influence parameters such as output power and offset are analyzed. Based on the analysis, the EMC test was implemented to evaluate the EMC performance of EUT.

In recent years, with the rapid development of new energy vehicles, the impact of electromagnetic field (EMF) from vehicles to human body has become a growing concern of consumers. The national standard GB/T 37130-2018 "Measurement methods for electromagnetic field of vehicle with regard to human exposure" was officially released at the end of 2018, which was attracted extensive attention of vehicle manufacturers, testing structures and consumers. GB/T 37130-2018 specifies the test methods for low frequency EMF of vehicles.