Search Results

At Boeing’s commercial aircraft production in Everett Washington, the organization that supplies parts to the factory floor (known internally as Company 625) is revising their methods. A new process will deliver parts in kits that correspond to the installation plans used by the mechanics. Several alternative methods are under review. The authors used simulation methods to evaluate and compare these alternatives. This study focuses on the category of parts known as standard fasteners (‘standards’). Through direct observation, interviews with experts, as well as time and motion study, the process flow of the kitting operation was mapped A simulation model was created using the simulation software ARENA to examine two scenarios: the current kitting operation in the factory cribs and the proposed centralization of kitting operation in the Company 625.

Minimizing the stress concentrations around cutouts in a plate is often a design problem, especially in the Aerospace industry. A problem of optimizing spatially varying fiber paths in a symmetric, linear orthotropic composite laminate with a cutout, so as to achieve minimum stress concentration under remote unidirectional tensile loading is of interest in this study. A finite element (FE) model is developed to this extent, which constraints the fiber angles while optimizing the fiber paths, proving essential in manufacturing processes. The idea to be presented could be used to derive fiber paths that would drastically reduce the Stress Concentration Factor (SCF) in a symmetric laminate by using spatially varying fibers in place of unidirectional fibers. The model is proposed for a four layer symmetric laminate, and can be easily reproduced for any number of layers.

Rational design for fire safety necessarily includes consideration of risk tradeoffs that tend to reduce one risk but may increase another. Traditional engineering design criteria can be supplemented with important factors that rely on expertise from other disciplines. Engineering analysis may be able to address reduction in fire risk due to the introduction of new technology, but may not address the social costs associated with this new technology. For example, the resultant increase in vehicle cost may prevent some people from purchasing a vehicle (impacting individuals' lives), may reduce the number of vehicles sold (impacting manufacturers), and may reduce taxes collected (impacting the government). This must be weighed against decreased risk of property damage, injury, and fatality due to fire. In this paper, the methods of benefit-cost analysis from economics were applied to make this evaluation.

An automotive propulsion concept is presented which utilizes liquid nitrogen as the working fluid for an open Rankine cycle. Ambient heat exchangers are used to power an engine that is configured to maximize heat transfer during the expansion stroke. If sufficient heat input during the expansion process can be realized then this cryogenic propulsive system would provide greater automotive ranges and lower operating costs than those of electric vehicles currently being considered for mass production. The feasibility of meeting this engineering challenge has been evaluated and several means of achieving quasi-isothermal expansion are discussed.

In applications ranging from design of customized vehicle interiors to virtual testing of biomedical devices, the processes of modeling, design and analysis involve the simultaneous treatment of artifacts (i.e., parts designed by humans) and anatomical structures. An inherent conflict arises because the geometric descriptions are completely different. Artifact descriptions are typically the output of computer-aided design (CAD) software and consist of a collection of parametric patches that comprise the boundary of the artifact. In stark contrast, the native description of an anatomical structure typically consists of an image stack obtained using a volumetric scanning technology such as computed tomography (CT) or magnetic resonance imaging (MRI). Current practice for simultaneously dealing with both categories of entities involves working primarily in the world of CAD.

In order to reduce painful and injurious shear stresses for lower limb amputees, prosthetic ankle joints need to provide torsional control in the transverse plane. This paper attempts to characterize biological ankle function in the transverse plane with simple mechanical elements to assist in the design of a biomimetic prosthetic ankle joint. Motion capture data was collected from ten subjects walking in a straight trajectory to model four states of stance phase. Passive elements were chosen to model the ankle in each state. The ankle was observed to act as a quadratic torsional spring in State 1 and as linear torsional springs in States 2, 3 and 4. The results of this study should assist with the mechanical design and control of a biomimetic torsional prosthesis by suggesting a finite state control system and by providing the stiffness coefficients to be controlled for straight walking.

Map matching determines which road a vehicle is on based on inaccurate measured locations, such as GPS points. Simple algorithms, such as nearest road matching, fail often. We introduce a new algorithm that finds a sequence of road segments which simultaneously match the measured locations and which are traversable in the time intervals associated with the measurements. The time constraint, implemented with a hidden Markov model, greatly reduces the errors made by nearest road matching. We trained and tested the new algorithm on data taken from a large pool of real drivers.

This investigation of the use of cryogens as energy storage media for zero emission vehicles has found that using liquid nitrogen to liquefy the working fluids of one or more closed Rankine power cycles can be an effective means for increasing motive power. System configurations are presented which can realize over 50% of the availability of liquid nitrogen without relying on isothermal expanders. A zero emission vehicle utilizing such a propulsion system would have an energy storage reservoir that can be refilled in a matter of minutes and a range comparable to that of a conventional automobile.

This paper develops and tests algorithms for predicting the end-to-end route of a vehicle based on GPS observations of the vehicle's past trips. We show that a large portion a typical driver's trips are repeated. Our algorithms exploit this fact for prediction by matching the first part of a driver's current trip with one of the set of previously observed trips. Rather than predicting upcoming road segments, our focus is on making long term predictions of the route. We evaluate our algorithms using a large corpus of real world GPS driving data acquired from observing over 250 drivers for an average of 15.1 days per subject. Our results show how often and how accurately we can predict a driver's route as a function of the distance already driven.

One barrier to the use of algae feedstocks as a source of CO2-neutral, renewable liquid fuel is the potential for high processing costs. An important processing step is the extraction of oil from the biomass. While there is substantial industrial experience in lipids from oil seeds, these processes may be unattractive for algal fuel oil due to high costs. Laboratory data suggest, however, that the relatively fragile nature of algal biomass may speed the mass transfer processes that control the extraction rate, and thus either reduce equipment size or allow increased throughput. In the present paper, laboratory-scale extraction data are used to develop a finite difference model of a full-scale extractor. The results indicate that such an extractor may have an increase in throughput of a factor of 5-10 without losing extraction efficiency.

Oil extracted from microalgae has the potential to offset demand for petroleum, if conditions of cost and scale can be met. In this paper, we present the compositional differences of fatty acid methyl esters (FAMEs) obtained by solvent extraction from two different oleaginous microalgae. Oil samples were extracted from a proprietary alga (Alga X) and a more common Nannochloropsis oculata (NC) using the Soxhlet process with n-hexane. The neutral lipids contained in Alga X comprised approximately 40 to 60% of the algal dry weight, and the oil was mostly converted to methyl esters using a transesterification process. On the other hand, NC produced approximately 25% lipids, but the yield of methyl esters was often less than 1% and subject to high variation. FAMEs were analyzed using gas chromatography and the average chain lengths for NC were shown to be greater than the average chain lengths for Alga X.

The repairing of commercial aircraft is a complex task. Service engineers at Boeing's Commercial Aviation Services group specialize in providing crucial repair information and technical support for its many customers. This paper details factors that influence Boeing's response time to service requests and how to improve it. Information pertaining to over 5000 service requests from 2008 and 2009 was collected. From analysis of this data set, important findings were discovered. One major finding is that between 6 and 8 percent of service requests are late because time/date stamps used in reports were created in a different time zone.

A new method for improving the fatigue lives of holes in metal structures has been developed. The StressWave® process provides compressive residual stresses and fatigue life improvement factors that are similar to or exceed those produced by legacy mandrel cold working processes. StressWave creates the stresses prior to machining the hole, without any pre- or extra post-processing operations. The process has been applied in a variety of alloys (aluminum, steel, titanium and cast iron) and section thickness (0.8 to 25 mm). Fatigue testing has shown life improvement factors typically five to twenty times greater than untreated open-hole specimens. Residual stress distributions have been measured by neutron diffraction and photo-elastic techniques and compared with FEA analysis to verify process parameters. Crack growth measurements and fractography have revealed the beneficial compressive residual stresses extend fatigue crack growth life.

The patented StressWave cold working process improves the fatigue lives of holes in metal structure by locally treating the metal prior to machining the hole. This important feature, as well as other aspects of the process, offers a number of advantages for manufacturing fatigue-resistant components and assembled structure. Existing manufacturing and assembly equipment can be retrofitted to accommodate various StressWave adaptive devices. These adaptive devices can be actively or passively controlled, work effectively over a wide range of processing speeds and production rates, and can be controlled to adjust for varying thickness of the part or assembly. The flexibility of the StressWave cold working process allows it to be used upstream of final assembly allowing order of magnitude cost reductions when compared to mandrel cold working methods.

A new, patented process for improving the fatigue lives of holes in metal structures has been developed. The process, known as StressWaveTM, produces residual compressive stresses and fatigue performance comparable to, or better than, those produced by legacy cold working methods and is designed primarily for automated manufacturing, fastening and assembly environments. Eliminating the need for close-tolerance starting holes, consumable sleeves, liquid lubricant cleanup and off-line processing increases speed of operation. These process benefits and associated cost savings satisfy many aspects of lean and continuous improvement program initiatives.

This study investigates using driver prediction to anticipate energy usage over a 160-meter look-ahead distance for a series, plug-in, hybrid-electric vehicle to improve conventional thermostatic powertrain control. Driver prediction algorithms utilize a hidden Markov model to predict route and a regression tree to predict speed over the route. Anticipated energy consumption is calculated by integrating force vectors over the look-ahead distance using the predicted incline slope and vehicle speed. Thermostatic powertrain control is improved by supplementing energy produced by the series generator with regenerative braking during events where anticipated energy consumption is negative, typically associated with declines or decelerations.

Regenerative braking is an important factor in improving hybrid electric vehicle efficiency. This paper proposes a new regenerative braking strategy that activates preemptively during a distracted driving scenario, before service brakes are utilized. The strategy uses onboard advanced driver assistance systems, such as forward facing radar, to detect when an object is approaching fast enough to enable regenerative braking in response. The proposed strategy is simulated on a full-vehicle model of a series plug-in hybrid electric vehicle. A driver model is developed to mimic the behavior of a distracted driver through delayed response time to the changing speed of a lead vehicle. Multiple trials are simulated using different combinations of existing regenerative braking strategies along with the proposed strategy. Results show that a preventative regenerative braking control strategy can recuperate significant amounts of energy while also improving vehicle safety.

Whole-body vibration (WBV) is associated with several adverse health and safety outcomes including low-back pain (LBP) and driver fatigue. The objective of this study was to evaluate the efficacy of three commercially-available air-suspension truck seats for reducing truck drivers’ exposures to WBV. Seventeen truck drivers operating over a standardized route were recruited for this study and three commercially-available air suspension seats were evaluated. The predominant, z-axis average weighted vibration (Aw) and Vibration Dose Values (VDV) were calculated and normalized to represent eight hours of truck operation. In addition, the Seat Effective Amplitude Transmissibility (SEAT), the ratio of the seat-measured vibration divided by the floor-measured vibration, was compared across the three seats. One seat had significantly higher on-road WBV exposures whereas there were no differences across seats in off-road WBV exposures.

The University of Washington Advanced Vehicle Works team is currently in the process of designing Plug-in Hybrid Electric Vehicle (PHEV) for the EcoCAR2 Challenge. This competition challenges 15 universities across North America to reduce the environmental impact of a 2013 Chevrolet Malibu without compromising consumer acceptability. The architecture chosen by the team to address these goals is a Parallel Through The Road (PTTR) PHEV which provides all electric operation to displace petroleum usage, four wheel drive mode to improve utility performance for consumers, and effective charge-sustaining operation. The PTTR architecture is the lowest cost architecture to provide all of these benefits, and it does so without compromising safety performance of the platform.

We are developing a flexible and general methodology for real-time monitoring of acoustic emissions in machining applications. The goal of this work is to develop an approach to in-process monitoring which allows continuous assessment of tool wear and early warning of process exceptions. The nature of metal removal processes creates short-lived vibrations that carry information about the condition of the cutting tool and quality of cut. We wish to extract and represent these transient events without loss of important spectral structure. Other challenges include the need for system training data selection in the absence of expert labeled data, the modeling of short-term time evolution, and efficient real-time operation on an inexpensive computing platform.