Search Results

In this paper a yaw stability control algorithm along with an emergency roll control strategy have been developed. The yaw stability controller and emergency roll controller were both developed using linear two degree-of-freedom vehicle models. The yaw stability controller is based on Lyapunov stability criteria and uses vehicle lateral acceleration and yaw rate measurements to calculate the corrective yaw moment required to stabilize the vehicle yaw motion. The corrective yaw moment is then applied by means of a differential braking strategy in which one wheel is selected to be braked with appropriate brake torque applied. The emergency roll control strategy is based on a rollover coefficient related to vehicle static stability factor. The emergency roll control strategy utilizes vehicle lateral acceleration measurements to calculate the roll coefficient. If the roll coefficient exceeds some predetermined threshold value the emergency roll control strategy will deploy.

Assessment of braking performance that includes brake fade is a critical part of the evaluation of military light tactical vehicles as it is for conventional light cars and trucks. These vehicles are sometimes called upon to operate in severe mountain regions that challenge the braking performance well beyond the environment in which these vehicles are normally operated. The U.S. Army Test Operating Procedure (TOP) 2-2-608 includes a test schedule conducted in the mountainous region near Jennerstown, Pennsylvania. While this test procedure represents a typical mountain environment, it does not represent the most severe mountain descents that can be encountered across the United States. As a preliminary step to developing a representative severe mountain descent braking test, mountain roads throughout the United States were evaluated analytically to identify potential test venues.

The vertical force generated from terrain-tire interaction has long been of interest for vehicle dynamic simulations and chassis development. To improve simulation efficiency while still providing reliable load prediction, a terrain pre-filtering technique using a constraint mode tire model is developed. The wheel is assumed to convey one quarter of the vehicle load constantly. At each location along the tire's path, the wheel center height is adjusted until the spindle load reaches the pre-designated load. The resultant vertical trajectory of the wheel center can be used as an equivalent terrain profile input to a simplified tire model. During iterative simulations, the filtered terrain profile, coupled with a simple point follower tire model is used to predict the spindle force. The same vehicle dynamic simulation system coupled with constraint mode tire model is built to generate reference forces.