Search Results

In the aerospace industry, methods for virtual testing cover an increasing range of test executions carried out during the development and test process of avionics systems. Over the last years, most companies have focused on questions regarding the evaluation and implementation of methods for virtual testing. However, it has become more and more important to seamlessly integrate virtual testing into the overall development process. For instance, a company’s test strategy might stipulate a combination of different methods, such as SIL and HIL simulation, in order to benefit from the advantages of both in the same test process. In this case, efforts concentrate on the optimization of the overall process, from test specification to test execution, as well as the test result evaluation and its alignment with methods for virtual testing.

This paper will first introduce and classify the basic principles of architecture-driven software development and will briefly sketch the presumed development process. This background information is then used to explain extensions which enable current behavior modeling and code generation tools to operate as software component generators. The generation of AUTOSAR software components using dSPACE's production code generator TargetLink is described as an example.

Model-based development and autocoding have become common practice in the automotive industry over the past few years. The industry is using these methods to tackle a situation in which complexity is constantly growing and development times are constantly decreasing, while the safety requirements for the software stay the same or even increase. The debate is no longer whether these methods are useful, but rather on the conditions for achieving optimum results with them. From the experiences made during the last decade this paper shows some of the key factors helping to achieve success when introducing or extending the deployment of automatic code generation in a model-based design process.

Over the last few years the introduction of explicit system and software architecture models (e.g. AUTOSAR models) has led to changes in the automotive development process. The ability to simulate these models on a PC will be decisive for the acceptance of such approaches. This would support the early verification of distributed ECU and software systems and could therefore lead to cost savings. This paper describes an implementation of such an approach which fits into current development processes.

Function models have a well-established position in automotive software development. Formal system models, on the other hand, are rare. This article describes the various aspects of function and system models, focusing mainly on AUTOSAR-compatible models. It also depicts the challenges for future overall models that combine the function models and the system model, and the resulting benefits, such as early system verification via PC-based simulations.

Hardware-in-the-loop (HIL) simulation in the development and test process of vehicle dynamics controllers requires a real-time tractor-trailer simulation model. The hitch coupling must be numerically stable to ensure real-time simulation for various driving maneuvers, particularly at the vehicle's handling limits. This paper presents a robust implementation of tractor-trailer coupling. The equation of motion is formed using a novel formulation which is a combination of Jourdain's Principle and the Articulated Body Algorithm. The paper shows that a robust model for a real-time tractor-trailer simulation can be achieved with the proposed method. Moreover, the approach presented is suitable for modular modeling, is successfully implemented and can also be used as a basis for flexible system definition with an adjustable number of trailer axles.

In future cars, mechanical and hydraulic components will be replaced by new electronic systems (x-by-wire). A failure of such a system constitutes a safety hazard for the passengers as well as for the environment of the car. Thus electronics and in particular software are taking over more responsibility and safety-critical tasks. To minimize the risk of failure in such systems safety standards are applied for their development. The safety standard IEC 61508 has been established for automotive electronic systems. At the same time, automatic code generation is increasingly being used for automotive software development. This is to cope with today's increasing requirements concerning cost reduction and time needed for ECU development combined with growing complexity. However, automatic code generation is hardly ever used today for the development of safety-critical systems.

Permanently increasing software complexity of today's electronic control units (ECUs) makes testing a central and significant task within embedded software development. While new software functions are still being developed or optimized, other functions already undergo certain tests, mostly on module level but also on system and integration level. Testing must be done as early as possible within the automotive development process. Typically ECU software developers test new function modules by stimulating the code with test data and capturing the modules' output behavior to compare it with reference data. This paper presents a new and systematic way of testing embedded software for automotive electronics, called MTest. MTest combines the classical module test with model-based development. The central element of MTest is the classification-tree method, which has originally been developed by the DaimlerChrysler research department.

This paper discusses the standards that can currently be applied to production code generators and examines five standards in detail: OSEK/VDX, MISRA C, ISO/IEC 15504 (SPiCE), which is compared to ‘CMM for Software’, and IEC 61508. The issues involved in meeting these standards or integrating them in production code generators are discussed. The suitability of automatic production code generation in safety-critical applications is described, taking the TargetLink production code generator from dSPACE as an example.

Due to the rapidly increasing number of electronic control units (ECUs) in modern vehicles, software and ECU testing plays a major role within the development of automotive electronics. To ensure effective as well as efficient testing within the whole development process, a seamless transition in terms of the reusability of tests and test data as well as powerful and efficient means for developing and describing tests are required. This paper therefore presents a new integration approach for modern test development and test management. Besides a very easy-to-use way of describing tests graphically, the main focus of the new approach is on the management of a large number of tests, test data, and test results, allowing close integration into the automotive development processes.

This paper presents an overview of a project called “Modelling and Simulation Tools for Systems Integration on Aircraft (MISSION)”. This is a collaborative project being developed under the European Union Clean Sky 2 Program, a public-private partnership bringing together aeronautics industrial leaders and public research organizations based in Europe. The provision of integrated modeling, simulation, and optimization tools to effectively support all stages of aircraft design remains a critical challenge in the Aerospace industry. In particular the high level of system integration that is characteristic of new aircraft designs is dramatically increasing the complexity of both design and verification. Simultaneously, the multi-physics interactions between structural, electrical, thermal, and hydraulic components have become more significant as the systems become increasingly interconnected.

Automotive technology is rapidly changing with electrification of vehicles, driver assistance systems, advanced safety systems etc. This advancement in technology is making the task of validation and verification of embedded software complex and challenging. In addition to the component testing, integration testing imposes even tougher requirements for software testing. To meet these challenges dSPACE is continuously evolving the Hardware-In-the-Loop (HIL) technology to provide a systematic way to manage this task. The paper presents developments in the HIL hardware technology with latest quad-core processors, FPGA based I/O technology and communication bus systems such as Flexray. Also presented are developments of the software components such as advanced user interfaces, GPS information integration, real-time testing and simulation models. This paper provides a real-world example of implication of integration testing on HIL environment for Chassis Controls.

Model-based development is the established way of developing embedded control algorithms, especially for safety-critical applications. The aim is to improve development efficiency and safety by developing the software at a high abstraction level (the model) and by generating the implementation (the C code) automatically from the model. Although model-based development focuses on the models themselves, downstream artifacts such as source code or executable object code have to be considered in the verification stage. Safety standards such as ISO 26262 require upper bounds to be determined for the required storage space or the execution time of real-time tasks, and the absence of run-time errors to be demonstrated. Static analysis tools are available which work at the code level and can prove the absence of such errors. However, the connection to the model level has to be explicitly established.

The essential task of a battery management system (BMS) is to consistently operate the high-voltage battery in an optimum range. Due to the safety-critical nature of its components, prior testing of a BMS is absolutely necessary. Hardware-in-the-loop (HIL) simulation is a cost-effective and efficient tool for this. Testing the BMS on a HIL test bench requires an electronics unit to simulate the cell voltages and a scalable real-time battery model. This paper describes a HIL system that enables comprehensive testing of BMS components. Hardware and software solutions are proposed for the high requirements of these tests. The individual components are combined to make a modular system, and safety-critical aspects are examined. The paper shows that the system as developed fulfills all the requirements derived from the different test scenarios for BMS systems.

The importance of electronics, especially software, has greatly increased over the last few years. Efforts to maintain a high level of software quality have made testing an important part of the development process. With the advent of model-based development, testing methods can be used not only on code level, but also on model level. Next to test execution itself, test development is seen as the most time- and cost-intensive part of the testing process. This paper outlines and classifies current approaches to model-based test development, with the aim of providing guidelines for test developers for choosing the method best suited to the type of system under test and the test objective.

Embedded software in the car is becoming increasingly complex due to the growing number of software-based controller functions and the increasing complexity of the software itself. Model-based development with Simulink combined with TargetLink for automatic code generation helps significantly to improve the quality of the embedded software. The development of large-scale Simulink models in distributed teams is a challenging task, especially when developing safety-critical software that must fulfill requirements stated in the ISO 26262 [1] safety standard. In practice, many questions on how to avoid the pitfalls of distributed model-based development remain open, such as how to define an appropriate model architecture, handle model complexity, and achieve compliance with ISO 26262. The intent of this paper is threefold. Firstly, we summarize those requirements of ISO 26262 that are relevant for developing complex software in a distributed environment.

The number of electrical and electronic components in modern vehicles is constantly growing. Increasingly, functionalities are being distributed across several electronic control units (ECUs). While suppliers themselves are responsible for ensuring that individual ECUs function properly, only the OEM can test distributed functions. Moreover, with the volume of testing steadily growing, automated sequences are absolutely essential. To test electronic networks in the vehicle, Ford Europe is using platform-based hardware-in-the-loop simulation with integrated failure insertion. The company is setting up a uniform, project-independent procedure, from standardized test definition to automated test sequences on a virtual vehicle, right through to structured evaluation.

Not only is the number of electronic control units (ECUs) in modern vehicles constantly increasing, the software of the ECUs is also becoming more complex. Both make testing a central task within the development of automotive electronics. Testing ECUs in real vehicles is time-consuming and costly, and comes very late in the automotive development process. It is therefore increasingly being replaced by laboratory tests using hardware-in-the-loop (HIL) simulation. While new software functions are still being developed or optimized, other functions are already undergoing certain tests, mostly on module level but also on system and integration level. To achieve the highest quality, testing must be done as early as possible within the development process. This paper describes the various test phases during the development of automotive electronics (from single function testing to network testing of all the ECUs of a vehicle).

The development of perception functions for tomorrow’s automated vehicles is driven by enormous amounts of data: often exceeding a gigabyte per second and reaching into the terabytes per hour. Data is typically gathered by a fleet of dozens of mule vehicles which multiply the data generated into the hundreds of petabytes per year. Traditional methods for fueling data-driven development would record every bit of every second of a data logging drive on solid-state drives located on a PC in the vehicle. Recorded data must then be exported from these drives using an upload station which pushes to the data lake after arriving back at the garage. This paper considers different techniques for curating logged data.

Increasing productivity along the development and verification process of safety-related projects is an important aspect in today’s technological developments, which need to be ever more efficient. The increase of productivity can be achieved by improving the usability of software tools and decreasing the effort of qualifying the software tool for a safety-related project. For safety-critical systems, the output of software tools has to be verified in order to ensure the tools’ suitability for safety-relevant applications. Verification is particularly important for test automation tools that are used to run hardware-in-the-loop (HIL) tests of safety-related software automatically 24/7. This qualification of software tools requires advanced knowledge and effort. This problem can be solved if a tool is suitable for developing safety-related software. This paper explains how this can be achieved for a COTS test automation tool.